GLL4735 to GLL4763A Vishay Semiconductors Zener Diodes Features • Plastic package has Underwriters Laboratory Flammability Classification 94 V-0 • For surface mounted applications • Glass passivated chip junction • Low zener impedance • Low regulation factor • High temperature soldering guaranteed: 250 °C/ 10 seconds at terminals Mechanical Data Case: MELF Plastic molded plastic over glass passivated junction Terminals: Solder plated, solderable per MIL-STD750, Method 2026 Polarity: Red band denotes Zener diode and positive end (cathode) 18267 Mounting Position: Any Weight: 0.0046oz., 116 mg Packaging codes/options: 26 / 5 k per 13 " Reel (12 mm tape), 60 k/box 46 / 1.5 k per 7 " Reel (12 mm tape), 30 k/box Absolute Maximum Ratings Tamb = 25 °C, unless otherwise specified Parameter Test condition Symbol Value Unit Ptot 1.0 3) W Symbol Value Unit RthJA 170 °C/W Zener current (see Table "Characteristics") Power dissipation Thermal Characteristics Tamb = 25 °C, unless otherwise specified Parameter Thermal resistance junction to ambient air Test condition Junction temperature Tj 150 °C Storage temperature TS - 65 to + 150 °C Document Number 85781 Rev. 1.4, 06-Aug-04 www.vishay.com 1 GLL4735 to GLL4763A Vishay Semiconductors Electrical Characteristics Partnumber Nominal Zener Test Current Maximum Dynamic Impedance Maximum DC Reverse Leakage Current Voltage 1) Maximum Zener Current(2) Maximum Forward Voltage VZ @ IZT IZT1 ZZT @ IZT ZZK @ IZK IZK IR VR IZM VF @ 200 mA V mA Ω Ω mA µA V mApk V GLL4735 6.2 41 2 700 1 50 3 730 1.2 GLL4736 6.8 37 3.5 700 1 10 4 660 1.2 GLL4737 7.5 34 4 700 0.5 10 5 605 1.2 GLL4738 8.2 31 4.5 700 0.5 10 6 550 1.2 GLL4739 9.1 28 5 700 0.5 10 7 500 1.2 GLL4740 10 25 7 700 0.25 10 7.6 454 1.2 GLL4741 11 23 8 700 0.25 5 8.4 414 1.2 GLL4742 12 21 9 700 0.25 5 9.1 380 1.2 GLL4743 13 19 10 700 0.25 5 9.9 344 1.2 GLL4744 15 17 14 700 0.25 5 11.4 305 1.2 GLL4745 16 15.5 16 700 0.25 5 12.2 285 1.2 GLL4746 18 14 20 750 0.25 5 13.7 250 1.2 GLL4747 20 12.5 22 750 0.25 5 15.2 225 1.2 GLL4748 22 11.5 23 750 0.25 5 16.7 205 1.2 GLL4749 24 10.5 25 750 0.25 5 18.2 190 1.2 GLL4750 27 9.5 35 750 0.25 5 20.6 170 1.2 GLL4751 30 8.5 40 1000 0.25 5 22.8 150 1.2 GLL4752 33 7.5 45 1000 0.25 5 25.1 135 1.2 GLL4753 36 7 50 1000 0.25 5 27.4 125 1.2 GLL4754 39 6.5 60 1000 0.25 5 29.7 115 1.2 GLL4755 43 6 70 1500 0.25 5 32.7 110 1.2 GLL4756 47 5.5 80 1500 0.25 5 35.8 95 1.2 GLL4757 51 5 95 1500 0.25 5 38.8 90 1.2 GLL4758 56 4.5 110 2000 0.25 5 42.6 80 1.2 GLL4759 62 4 125 2000 0.25 5 47.1 70 1.2 GLL4760 68 3.7 150 2000 0.25 5 51.7 65 1.2 GLL4761 75 3.3 175 2000 0.25 5 56 60 1.2 GLL4762 82 3 200 3000 0.25 5 62.2 55 1.2 GLL4763 91 2.8 250 3000 0.25 5 69.2 50 1.2 (1) Standard voltage tolerance is ± 10 %, Suffix A = ± 5 % (2) Surge current is a non-repetitive, 8.3 ms pulse width square wave or equivalent sine-wave superimposed on IZT per JEDEC Method (3) Maximum steady state power dissipation is 1.0 watt at TT = 75 °C www.vishay.com 2 Document Number 85781 Rev. 1.4, 06-Aug-04 GLL4735 to GLL4763A Vishay Semiconductors 1,000 1.0 60Hz Resistive or Inductive Load ZZ -- Dynamic Zener Impedance (Ω) PM(AV) -- Average Power Dissipation (W) Typical Characteristics (Tamb = 25 °C unless otherwise specified) 0.75 0.5 0.25 P.C.B. Mounted on 0.31 x 0.31 x 0.08Ó(8 x 8 x 2mm) Copper Areas Pads 0 25 50 18210 75 100 150 125 TJ = 25°C 100 VZ = 56V VZ = 6.2V 1 0.5 18213 10 100 500 Figure 4. Typical Zener Impedance 10 10 Instantaneous Reverse Current (µA) Instantaneous Forward Current (A) 1 IZT -- Zener Test Current (mA) Figure 1. Maximum Continuous Power Dissipation 1 Pulse Width = 300 s 1% Duty Cycle TJ = 25°C 0.1 0.01 0.4 18211 1 TJ = 100°C 0.1 TJ = 25°C 0.01 0.6 0.8 1 1.2 1.4 1.6 0 20 40 60 80 100 18214 Instantaneous Forward Voltage (V) Percent of Rated Zener Voltage (%) Figure 2. Typical Instantaneous Forward Characteristics for GLL4763 VZ -- Temperature Coefficient (mV/°C) VZ = 30V 10 175 Terminals Temperature ( °C) VZ = 91V Figure 5. Typical Reverse Characteristics 110 90 Tested at Rated IZT 70 50 30 10 0 0 10 20 30 40 50 60 70 80 90 100 18212 VZ - Zener Voltage (V) Figure 3. Typical Temperature Coefficients Document Number 85781 Rev. 1.4, 06-Aug-04 www.vishay.com 3 GLL4735 to GLL4763A Vishay Semiconductors Package Dimensions in Inches (mm) Solderable Ends 1st Band D2 +0 D2 = D1 -0.008 (0.20) ISO Method E D1 = 0.105 (2.67) 0.095 (2.41) Mounting Pad Layout 0.022 (0.56) 0.018 (0.46) 0.205 (5.2) 0.185 (4.7) 0.022 (0.56) 0.018 (0.46) 0.1.57 (4.00) Max. 0.049 (1.25) Min. 0.118 (3.00) Min. 1st Band denotes type and positive end (cathode) 18268 www.vishay.com 4 0.256 (6.50) Ref. Document Number 85781 Rev. 1.4, 06-Aug-04 GLL4735 to GLL4763A Vishay Semiconductors Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operatingsystems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 (0)7131 67 2831, Fax number: 49 (0)7131 67 2423 Document Number 85781 Rev. 1.4, 06-Aug-04 www.vishay.com 5 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1