GBJ6005 THRU GBJ610 GLASS PASSIVATED BRIDGE RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 6.0 Ampere FEATURES Glass passivated chip junction Reliable low cost construction utilizing molded plastic technique ● Ideal for printed circuit board ● Low reverse leakage current ● Low forward voltage drop ● High surge current capabiliy GBJ ● ● MECHANICAL DATA ● ● ● ● Case:Molded plastic, GBJ Terminals : Terminals: Leads solderable per MIL-STD-202 method 208 guaranteed Epoxy: UL 94V-0 rate flame retardant Mounting Position: Any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. Symbols GBJ 6005 GBJ 601 GBJ 602 GBJ 604 GBJ 606 GBJ 608 GBJ 610 Units Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current with Heatsink at TC = 100 OC I(AV) 6 A Peak Forward Surge Current, 8.3 ms Single Half-Sine -Wave superimposed on rated load (JEDEC Method) IFSM 170 A Maximum Forward Voltage at 3.0 A DC and 25 OC VF 1.1 V Maximum Reverse Current at TA = 25 C at Rated DC Blocking Voltage TA = 125 OC IR 5.0 500 µA CJ 55 pF Typical Thermal Resistance 2) RθJC 1.8 Operating and Storage Temperature Range TJ,TS -55 to +150 Parameter O Typical Junction Capacitance 1) 2) 1) Measured at 1 MHz and applied reverse voltage of 4 VDC. Thermal resistance from junction to case with device mounted on 300 mm X 300 mm X 1.6 mm Cu plate heatsink. C/W O C O GBJ6005 THRU GBJ610 RATINGS AND CHARACTERISTIC CURVES Fig. 2 - Maximum Non-Repetitive Surge Current Peak Forward Surge Current, Amperes Average Forward Current Amperes Fig. 1 - Forward Current Derating Curve With Heatsink 6.0 5.0 4.0 Without Heatsink 3.0 Single Phase Half Wave 60Hz Resistive or Inductive Load 2.0 0.0 0 20 40 60 80 100 120 140 Case Temperature, C 180 160 140 120 100 80 60 40 Single Half-Sine-Wave (JEDEC Method) 20 0 0 10 20 50 100 Fig. 4 - Typical Forward Charactistics 10 Instantaneous Forward Current, (A) 100 TJ = 25oC, f = MHz 10 4.0 10.0 o TJ = 25 C Pulse Width: 300 us 1.0 0.1 0.01 0 100 Reverse Voltage, Volts 0.2 0.4 0.6 0.8 Fig. 5 - Typical Reverse Characteristics o 100 TJ = 125 C o TJ = 100 C 10 o 1.0 TJ = 50 C o TJ = 25 C 0.1 0 20 40 60 1.0 1.2 1.4 1.6 Instantaneous Forward Voltage, Volts 1000 Instantaneous Reverse Current, (uA) Capacitance, (pF) 5 Number of Cycles at 60 Hz Fig. 3 - Typical Junction Capacitance 1.0 1.0 2 80 Percent of Rate Peak Reverse Voltage, % 100 1.8