AOT5N50/AOTF5N50 500V, 5A N-Channel MOSFET General Description Features The AOT5N50 & AOTF5N50 have been fabricated using an advanced high voltage MOSFET process that is designed to deliver high levels of performance and robustness in popular AC-DC applications. By providing low RDS(on), Ciss and Crss along with guaranteed avalanche capability these parts can be adopted quickly into new and existing offline power supply designs. VDS (V) = 600V @ 150°C ID = 5A RDS(ON) < 1.5Ω Top View TO-220 G D G S D 100% UIS Tested! 100% R g Tested! TO-220F D G S S Absolute Maximum Ratings TA=25°C unless otherwise noted Parameter AOT5N50 Symbol AOTF5N50 VDS Drain-Source Voltage 500 VGS ±30 Gate-Source Voltage TC=25°C Continuous Drain Current (VGS = 10V) TC=100°C 5* 3.3* 5 ID 3.3 Units V V A C IDM 18 C, G IAR 2.6 A EAR 101 mJ Single pulsed avalanche energy G Peak diode recovery dv/dt TC=25°C Power Dissipation B Derate above 25 oC EAS dv/dt 203 5 mJ V/ns W Junction and Storage Temperature Range Maximum lead temperature for soldering purpose, 1/8" from case for 5 seconds Thermal Characteristics Parameter TJ, TSTG Pulsed Drain Current Avalanche Current Repetitive avalanche energy C, G Maximum Junction-to-Ambient A,D A PD 35 0.28 -50 to 150 W/ oC °C 300 °C TL Symbol RθJA RθCS Maximum Case-to-Sink RθJC Maximum Junction-to-Case * Drain current limited by maximum junction temperature. Alpha & Omega Semiconductor, Ltd. 104 0.83 AOT5N50 65 AOTF5N50 65 Units 0.5 -3.6 °C/W °C/W 1.2 °C/W www.aosmd.com AOT5N50/AOTF5N50 Electrical Characteristics (T J=25°C unless otherwise noted) Parameter Symbol STATIC PARAMETERS Conditions Min ID=250µA, VGS=0V, TJ=25°C 500 BVDSS Drain-Source Breakdown Voltage BVDSS Breakdown Voltage Temperature /∆TJ Coefficient IDSS Zero Gate Voltage Drain Current IGSS Gate-Body leakage current VDS=0V, VGS=±30V ID=250µA, VGS=0V, TJ=150°C Typ Max Units V 600 ID=250µA, VGS=0V V o V/ C 0.55 VDS=500V, VGS=0V 1 VDS=400V, TJ=125°C 10 µA ±100 nA VGS(th) Gate Threshold Voltage VDS=VGS, ID=250µA 4.1 4.7 V RDS(ON) gFS Static Drain-Source On-Resistance VGS=10V, ID=2.5A 1.1 1.5 Forward Transconductance VDS=40V, ID=2.5A 6 Ω S VSD Diode Forward Voltage IS=1A, VGS=0V Maximum Body-Diode Continuous Current 1 V IS ISM Maximum Body-Diode Pulsed Current DYNAMIC PARAMETERS Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance Rg Gate resistance SWITCHING PARAMETERS Qg Total Gate Charge Qgs Gate Source Charge 3.5 0.75 414 VGS=0V, VDS=25V, f=1MHz VGS=0V, VDS=0V, f=1MHz VGS=10V, VDS=400V, ID=5A 517 5 A 18 A 620 pF 46 57 68 pF 3.9 4.9 5.9 pF 1.9 3.8 5.7 Ω 15.5 19.0 nC 3.4 4.0 nC Qgd Gate Drain Charge 7.2 8.6 nC tD(on) Turn-On DelayTime 14.5 17.4 ns tr Turn-On Rise Time 29 35.0 ns tD(off) Turn-Off DelayTime 34.5 41.4 ns tf Turn-Off Fall Time 24 29.0 ns 166 199 1.37 1.6 ns µC trr Qrr VGS=10V, VDS=250V, ID=5A, RG=25Ω IF=5A,dI/dt=100A/µs,VDS=100V Body Diode Reverse Recovery Time Body Diode Reverse Recovery Charge IF=5A,dI/dt=100A/µs,VDS=100V A. The value of R θJA is measured with the device in a still air environment with T A =25°C. B. The power dissipation PD is based on TJ(MAX)=150°C, using junction-to-case thermal resistance, and is more useful in setting the upper dissipation limit for cases where additional heatsinking is used. C. Repetitive rating, pulse width limited by junction temperature TJ(MAX)=150°C, Ratings are based on low frequency and duty cycles to keep initial TJ =25°C. D. The R θJA is the sum of the thermal impedence from junction to case R θJC and case to ambient. E. The static characteristics in Figures 1 to 6 are obtained using <300 µs pulses, duty cycle 0.5% max. F. These curves are based on the junction-to-case thermal impedence which is measured with the device mounted to a large heatsink, assuming a maximum junction temperature of TJ(MAX)=150°C. The SOA curve provides a single pulse rating. G. L=60mH, IAS=2.6A, VDD=50V, RG=25Ω, Starting TJ=25°C Rev 3 Dec. 2008 THIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISING OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN, FUNCTIONS AND RELIABILITY WITHOUT NOTICE. Alpha & Omega Semiconductor, Ltd. www.aosmd.com AOT5N50/AOTF5N50 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 10 100 10V 6 -55°C 10 6V ID(A) ID (A) VDS=40V 6.5V 8 4 125°C 1 VGS=5.5V 2 25°C 0.1 0 0 5 10 15 20 25 30 2 3.5 3 3.0 2.5 2.5 2.0 4 6 8 10 VGS(Volts) Figure 2: Transfer Characteristics Normalized On-Resistance RDS(ON) (Ω) VDS (Volts) Fig 1: On-Region Characteristics VGS=10V 1.5 1.0 200 16 VGS=10V ID=2.5A 2 1.5 1 0.5 0.5 0 2 4 6 8 10 0 -100 12 ID (A) Figure 3: On-Resistance vs. Drain Current and Gate Voltage -50 0 50 100 150 200 Temperature (°C) Figure 4: On-Resistance vs. Junction Temperature 1.2 1.0E+02 125°C 1.0E+00 IS (A) BVDSS (Normalized) 1.0E+01 1.1 1 1.0E-01 25°C 1.0E-02 1.0E-03 0.9 1.0E-04 0.8 -100 1.0E-05 -50 0 50 100 150 200 TJ (oC) Figure 5: Break Down vs. Junction Temperature Alpha & Omega Semiconductor, Ltd. 0.0 0.2 0.4 0.6 0.8 1.0 VSD (Volts) Figure 6: Body-Diode Characteristics www.aosmd.com AOT5N50/AOTF5N50 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 15 10000 VDS=400V ID=5A Capacitance (pF) VGS (Volts) 12 9 6 Ciss 1000 Coss 100 10 3 Crss 0 1 0 3 6 9 12 15 18 Qg (nC) Figure 7: Gate-Charge Characteristics 21 100 1 10 VDS (Volts) Figure 8: Capacitance Characteristics 10µs 100µs 1 1ms DC 0.1 10ms 0.1s TJ(Max)=150°C TC=25°C 10µs 10 ID (Amps) RDS(ON) limited 100 200 16 100 10 ID (Amps) 0.1 RDS(ON) limited 100µs 1 DC 0.1 TJ(Max)=150°C TC=25°C 0.01 1ms 10ms 0.1s 1s 10s 0.01 1 10 100 1000 VDS (Volts) 1 10 100 1000 VDS (Volts) Figure 9: Maximum Forward Biased Safe Operating Area for AOT5N50 (Note F) Figure 10: Maximum Forward Biased Safe Operating Area for AOTF5N50(Note F) 6 Current rating ID(A) 5 4 3 2 1 0 0 25 50 75 100 125 150 TCASE (°C) Figure 11: Current De-rating (Note B) Alpha & Omega Semiconductor, Ltd. www.aosmd.com AOT5N50/AOTF5N50 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS ZθJC Normalized Transient Thermal Resistance 10 1 D=Ton/T TJ,PK=TA+PDM.ZθJC.RθJC RθJC=1.2°C/W In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse 0.1 PD 0.01 Ton Single Pulse 0.001 0.00001 0.0001 0.001 0.01 0.1 1 T 10 100 Pulse Width (s) Figure 12: Normalized Maximum Transient Thermal Impedance for AOT5N50 (Note F) ZθJC Normalized Transient Thermal Resistance 10 1 200 16 D=Ton/T TJ,PK=TA+PDM.ZθJC.RθJC RθJC=3.6°C/W In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse 0.1 PD 0.01 Ton Single Pulse 0.001 0.00001 0.0001 0.001 0.01 0.1 1 T 10 100 Pulse Width (s) Figure 13: Normalized Maximum Transient Thermal Impedance for AOTF5N50 (Note F) Alpha & Omega Semiconductor, Ltd. www.aosmd.com AOT5N50/AOTF5N50 Gate Charge Test Circuit & Waveform Vgs Qg 10V + + VDC - VDC DUT Qgs Vds Qgd - Vgs Ig Charge Res istive Switching Test Circuit & Waveforms RL Vds Vds DUT Vgs Rg + VDC 90% Vdd - 10% Vgs Vgs t d(on) tr t d(off) t on tf t off Unclamped Inductive Switching (UIS) Test Circuit & Waveforms L EAR= 1/2 LI Vds 2 AR BVDSS Vds Id + Vgs Vgs VDC Rg - Vdd I AR Id DUT Vgs Vgs Diode Recovery Test Circuit & Waveforms Qrr = - Idt Vds + DUT Vds - Isd Vgs L Vgs Ig Alpha & Omega Semiconductor, Ltd. Isd + VDC - IF trr dI/dt IRM Vdd Vdd Vds www.aosmd.com