PRODUCT DATASHEET Barbara series last update 7/7/2017 DETAILS Product Number C14636_XTM-PF-ADAPTER Family Barbara Type Base part Color white Diameter 48,35 mm Height 9 mm Style round Optic Material Holder Material PC Fastening screw Status production ready ROHS Compliant Yes Date Updated 7/07/2017 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency cd/lm Connector XTM - 9mm LES N/A deg - - - January 31st 2018 10:15 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1 Ledil Oy Salorankatu 10 24240 SALO, Finland http://www.ledil.com email: [email protected] FAX: +358-2-733 8001 A B C D 4 1.2 9 3.8 4 4 Isometric view Front view 4 8 . 3 5 28 3 3 1 2. 3. 1 38 23. 43 39 2 2 Top view Bottom view INDEX PART NO DESCRIPTION MATERIAL COLOUR 1 Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: up to 30mm class M, otherwise class C According to DIN ISO 2768-2 Form and position: class L 1 THIRD ANGLE PROJECTION: This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy. XTM-PF-ADAPTER PC white Ledil Oy Salorankatu 10 FIN 24240 SALO Finland DRAWING TITLE C14636_XTM-PF-ADAPTER SIZE 1 PART NUMBER A4 SCALE D C14636 C14636 1:1 WEIGHT 2,3 g SHEET A 1/1 NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value. GENERAL INFORMATION - Product series especially designed & optimized for series of LEDs. - Special care taken to make light distribution as uniform as possible. Note! Due to use of high power COB's with this product, special attention to proper thermal design is highly recommended. LEDiL has no liability for direct, indirect or consecutive damages arising from the LEDiL products being used outside of the recommended temperature range.