BattHolSection - 2010:BattHolSection - 2005 8/6/10 16:28 Page 7 Front panel sealed to IP67 AA SIZE BATTERY HOLDER ᔢ 1, 2 or 3 Cells ᔢ Flanged Panel Mount ᔢ Bayonet with finger/coin slot release ᔢ Supplied with gasket and sealing grommets for screws BXS011/1 C SIZE BATTERY HOLDER ᔢ ᔢ ᔢ ᔢ 1, 2 or 3 Cells Panel Mount Screw Cap/Hand release Supplied with gasket ᔢ ᔢ ᔢ ᔢ 1, 2 or 3 Cells Flanged Panel Mount Bayonet/finger release Supplied with flange gasket and sealing grommets for screws BXS001/1 D SIZE BATTERY HOLDER BXS016 Specification BXS011/1, BXS012/1, BXS013/1 BXS001/1, BXS002/1, BXS003/1 BXS016, BXS017, BXS018 Battery/Cell Type: AA (R6) C (R14) D (R20) No. Cells: BXS011/1 - 1 cell BXS012/1 - 2 cells BXS013/1 - 3 cells BXS001/1 - 1 cell BXS002/1 - 2 cells BXS003/1 - 3 cells BXS016 -1 cell BXS017 - 2 cells BXS018 - 3 cells Terminations: 2.8 series tabs/solder tags 2.8 series tabs/solder tags 4.8 series tabs/solder tags Operating Temperature: –30˚C to +70˚C –30˚C to +70˚C –30˚C to +70˚C Mouldings: Nylon Glass filled Polyester Polycarbonate Nylon Glass filled Polyester Nylon Glass filled Polyester Flammability Rating: UL94V-0 UL94V-0 UL94V-0 Contacts: Brass, Tin Plated - rear contact Nickel Silver, clean - front contact and cap contact plate Brass, Tin Plated - front and rear contacts Nickel Silver, clean - cap contact plate Brass, Nickel Plated - front and rear contacts and cap contact plate Features: Bayonet cap with finger grip and coin slot Rear support bracket Screw on cap with finger grip Recommended torque for panel ring 1.13-1.7Nm (10-15lbf.in) Bayonet cap with finger grip Rear support bracket Sealing (front of panel): Protection classification IP67, BS60529:1992 Protection classification IP67, BS60529:1992 Protection classification IP67, BS60529:1992 Notes: Recommend 2 & 3 cell versions are supported by rear bracket Compliant www.elektron-bulgin.com Recommend 2 & 3 cell versions are supported by rear bracket Compliant Compliant 7 BATTERY HOLDERS BATTERY HOLDERS