Newhaven JSTB3B-XH-A Xh connector Datasheet

Crimp
2.5mm
XH CONNECTOR
Emboss Tape
Radial Tape
Disconnectable Crimp style connectors
(.098") pitch
Features ––––––––––––––––––––––––
• Original folded beam contact
The protected, folded beam contact in this connector provides
high contact pressure with an over-stress stop feature. This
ensures dependable continuity when used with low voltage,
low current carrying circuits (dry circuits). The wire crimp
section is mechanically decoupled from the post insertion
section which, in turn, prevents the mating area from being
adversely affected by crimping.
• Box-shaped shrouded header
The four-sided, box-shaped shroud prevents the receptacle
from being misinserted or pried during insertion and removal.
The shroud also prevents foreign matter from reaching the
posts and resists contact deformation due to handling and
shipping. Furthermore, a serrated, oversized square post is
pressure-fit into each square hole to completely protect the
post against heat and to prevent flux from entering during dip
soldering.
• Header with a boss
This header has a boss (projection) on the bottom of the
housing to prevent improper insertion in printed circuit boards.
The XH connector was developed based
on the high reliability and versatility of our
NH series connectors. The connector is
very small with a mounting height of
9.8mm (.386"). Yet it meets the needs for
high-density mounting and miniaturization
of electronic equipment, including VCRs,
radio-cassette players, and car stereo
systems.
• Interchangeability
This header is interchangeable with those of 2.5mm (.098")
pitch insulation displacement NR and NRD connectors and
board-to-board JQ connectors.
• Conforming to the HA terminal
The 4-circuit XH connector conforms to the HA terminal
specified in JEM 1427 (Japanese Electric Machine Industry
Association Standards).
1
Specifications –––––––––––––––––––
5
JS
T
• Current rating: 3A AC, DC (AWG#22)
• Voltage rating: 250V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/10m Ω max.
After environmental testing/20m Ω max.
• Insulation resistance:
1,000M Ω min.
• Withstanding voltage: 1,000V AC/minute
• Applicable wire: AWG #30 to #22
• Applicable PC board thickness: 1.6mm(.063")
* Contact JST if Lead-Free product is required.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards–––––––––––––––––––––––
0 Recognized E60389
1
2
Certified LR20812
J50014297
95
XH
CONNECTOR
Contact –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
2.35(.093)
Shape A
Model No.
Shape
SXH-001T-P0.6N
SXH-001T-P0.6
SXH-002T-P0.6
A
1.6(.063)
1.8(.071)
B
6.5(.256)
1.95(.077)
0.13 to 0.33
26 to 22
1.3 to 1.9(.051 to .075)
0.08 to 0.33
28 to 22
1.2 to 1.9(.047 to .075)
0.05 to 0.13
30 to 26
0.9 to 1.3(.035 to .051)
5,000
8,000
Material and Finish
Phosphor bronze, tin-plated
2.0(.079)
2.4(.094)
Shape B
Applicable Wire
Q'ty /
AWG# Insulation O.D mm(in.) reel
mm2
Note:
1. Contact JST if you require gold-plated contacts or contacts made of brass.
2. Contact JST also if you require shielded wires, thin wires or other
special wires.
3. SXH-001T-P0.6N is low-insertion force type contact, for easier insertion/
withdrawal, which would be less resistant to the vibration.
6.5(.256)
7.75(.305)
Housing –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Circuits
Model No.
1
XHP- 1
XHP- 2
XHP- 2(10.0)-U
XHP- 3
XHP- 4
XHP- 5
XHP- 6
XHP- 6(5.0)-U
XHP- 7
XHP- 8
XHP- 9
XHP-10
XHP-11
XHP-12
XHP-13
XHP-14
XHP-15
XHP-16
XHP-20
2
2
4.1(.161)
3
5.7(.224)
4
5
6
Circuit No.1 mark
A
B
C
6
2.5
(.098)
7
8
9
10
Plugged up
11
(2 circuits 10.0mm(.394") pitch)
12
7.75(.305)
13
14
15
16
4.1(.161)
5.7(.224)
20
A
Dimensions mm(in.)
B
C
3.2( .126)
4.8( .189)
1,000
2.5(.098)
5.7( .224)
7.3( .287)
1,000
10.0(.394)
13.2( .520)
14.8( .583)
1,000
5.0(.197)
8.2( .323)
9.8( .386)
1,000
7.5(.295)
10.7( .421)
12.3( .484)
1,000
10.0(.394)
13.2( .520)
14.8( .583)
1,000
12.5(.492)
15.7( .618)
17.3( .681)
1,000
25.0(.984)
28.2(1.110)
29.8(1.173)
1,000
15.0(.591)
18.2( .717)
19.8( .780)
1,000
17.5(.689)
20.7( .815)
22.3( .878)
1,000
20.0(.787)
23.2( .913)
24.8( .976)
1,000
22.5(.886)
25.7(1.012)
27.3(1.075)
1,000
25.0(.984)
28.2(1.110)
29.8(1.173)
1,000
27.5(1.083)
30.7(1.209)
32.3(1.272)
1,000
30.0(1.181)
33.2(1.307)
34.8(1.370)
1,000
32.5(1.280)
35.7(1.406)
37.3(1.469)
1,000
35.0(1.378)
38.2(1.504)
39.8(1.567)
1,000
37.5(1.476)
40.7(1.602)
42.3(1.665)
1,000
47.5(1.870)
50.7(1.996)
52.3(2.059)
500
—
Material
Circuit No.1 mark
Nylon 6, UL94V-0, natural (white)
A
B
C
Note:
1. XHP-2(10.0)-U is 2 circuits 10.0mm(.394") pitch plugged up.
Not UL/CSA/TÜV approved.
2. XHP-6(5.0)-U is 6 circuits 5.0mm(.197") pitch plugged up.
Not UL/CSA/TÜV approved.
7.75(.305)
(6 circuits 5.0mm(.197") pitch)
4.1(.161)
5.7(.224)
<For reference>
As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
ex.
Circuit No.1 mark
A
B
C
XHP-1-oo(blank)…natural (white)
BK…black R…red E…blue Y…yellow L…lemon yellow
M…green D…orange N…brown FY…vivid yellow
<Plugged up type>
ex.
96
XHP-2(10.0)-U-oo(blank)…natural (white)
R…red E…blue
Q'ty / bag
XH
CONNECTOR
Through-hole type shrouded header –––––––––––––––––––––––––––––––––––––––––
The shrouded headers are interchangeable with those of the BR, NR and NRD insulation displacement connectors, and JQ board-to-board connectors.
Side entry type
0.64(.025)
2.45
(.096) A
B
2.5
(.098)
2.45
(.096)
[2.35
(.093)]
5.75(.226)
Top entry type
(plugged up)
(3 to 20 circuits)
3.4
(.134) 7.0(.276)
8
H JST
3.4
(.134)
JST
Circuits
0.64(.025)
7.0(.276)
0.64(.025)
2.45
(.096)
3.4
[6.1(.240)] (.134)
A
B
S( )B-XH-A: 9.2(.362)
JST
S( )B-XH-A-1: 7.6(.299)
8
7.0(.276)
11.5(.453)
JST
0.64(.025)
3.4
(.134) 7.0(.276)
Top entry type
(2 circuits)
[2.35
(.093)]
5.75(.226)
2.5
(.098)
A
B
2.45
(.096)
Model No.
Top entry type
[2.35
(.093)]
10.0(.394)
14.9(.587)
5.75(.226)
Dimensions mm(in.)
Side entry type
A
B
Q'ty / box
Top entry type Side entry type
2
B 2B-XH-A
–
S 2B-XH-A
2.5( .098)
7.4( .291)
1,000
1,000
2
B2 (10.0)B-XH-A-U
–
–
10.0( .394)
14.9( .587)
1,000
1,000
3
B 3B-XH-A
S 3B-XH-A-1
S 3B-XH-A
5.0( .197)
9.9( .390)
1,000
1,000
4
B 4B-XH-A
S 4B-XH-A-1
S 4B-XH-A
7.5( .295)
12.4( .488)
500
500
5
B 5B-XH-A
S 5B-XH-A-1
S 5B-XH-A
10.0( .394)
14.9( .587)
500
500
6
B 6B-XH-A
S 6B-XH-A-1
S 6B-XH-A
12.5( .492)
17.4( .685)
500
500
7
B 7B-XH-A
S 7B-XH-A-1
S 7B-XH-A
15.0( .591)
19.9( .783)
500
250
8
B 8B-XH-A
S 8B-XH-A-1
S 8B-XH-A
17.5( .689)
22.4( .882)
500
250
9
B 9B-XH-A
S 9B-XH-A-1
S 9B-XH-A
20.0( .787)
24.9( .980)
500
250
10
B10B-XH-A
S10B-XH-A-1
S10B-XH-A
22.5( .886)
27.4(1.079)
250
250
11
B11B-XH-A
S11B-XH-A-1
S11B-XH-A
25.0( .984)
29.9(1.177)
250
250
12
B12B-XH-A
S12B-XH-A-1
S12B-XH-A
27.5(1.083)
32.4(1.276)
250
200
13
B13B-XH-A
S13B-XH-A-1
S13B-XH-A
30.0(1.181)
34.9(1.374)
250
200
14
B14B-XH-A
S14B-XH-A-1
S14B-XH-A
32.5(1.280)
37.4(1.472)
250
200
15
B15B-XH-A
S15B-XH-A-1
S15B-XH-A
35.0(1.378)
39.9(1.571)
250
100
16
B16B-XH-A
–
S16B-XH-A
37.5(1.476)
42.4(1.669)
200
100
20
B20B-XH-A
–
–
47.5(1.870)
52.4(2.063)
100
–
Material and Finish
Post: Brass, copper-undercoated, tin/lead-plated
Wafer: Nylon 66, UL94V-0, natural (white)
Note: B2(10.0)B-XH-A-U is 2 circuits 10.0mm(.394") pitch plugged up. Not UL/CSA/TÜ V approved.
<For reference>
As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
ex.
S3B-XH-A(-1)-oo(blank)…natural (white)
BK…black R…red E…blue Y…yellow L…lemon yellow M…green D…orange N…brown FY…vivid yellow
97
XH
CONNECTOR
Through-hole type shrounded header ––––––––––––––––––––––––––––––––––––––––
Top entry type of glass-filled nylon
(2 circuits)
3.4
(.134)
7.0
(.276)
0.64(.025)
2.45(.096)
5.75(.226)
6.75(.266)
A
B
3.4
(.134)
6
H JST
7.0
(.276)
(3 to 8 circuits)
2.5
2.45 (.098)
(.096)
0.64(.025)
A
B
5.75(.226)
6.75(.266)
(9 to 15 circuits)
3.4
(.134)
7.0
(.276)
12
H JST
2.5
2.45 (.098)
(.096)
Circuits
Model No.
2
B 2B-XH-2
B 3B-XH-2
B 4B-XH-2
B 5B-XH-2
B 6B-XH-2
B 7B-XH-2
B 8B-XH-2
B 9B-XH-2
B10B-XH-2
B11B-XH-2
B12B-XH-2
B13B-XH-2
B14B-XH-2
B15B-XH-2
3
4
5
6
7
8
9
10
11
12
13
14
15
0.64(.025)
5.75(.226)
A
B
Dimensions mm(in.)
A
1,000
5.0( .197)
9.9( .390)
1,000
7.5( .295)
12.4( .488)
500
10.0( .394)
14.9( .587)
500
12.5( .492)
17.4( .685)
500
15.0( .591)
19.9( .783)
500
17.5( .689)
22.4( .882)
250
20.0( .787)
24.9( .980)
250
22.5( .886)
27.4(1.079)
250
25.0( .984)
29.9(1.177)
250
27.5(1.083)
32.4(1.276)
250
30.0(1.181)
34.9(1.374)
250
32.5(1.280)
37.4(1.472)
250
35.0(1.378)
39.9(1.571)
250
Material and Finish
ex.
98
B2B-XH-2-oo(blank)…natural (ivory)
C…black R…red E…blue Y…yellow M…green
Q'ty / box
7.4( .291)
Post: Brass, copper-undercoated, tin/lead-plated
Wafer: Glass-filled nylon 66, UL94V-0, natural (ivory)
<For reference>
As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
B
2.5( .098)
XH
CONNECTOR
Through-hole type shrouded header –––––––––––––––––––––––––––––––––––––––––
The shrouded headers are interchangeable with those of the NR, NRD and BR insulation displacement connectors, and JQ board-to-board connectors.
Top entry type with a boss
Circuits
(1 circuit)
2.7(.106)
3.4
(.134) 7.0(.276)
0.64(.025)
H JST
1.5(.059)
[2.35(.093)]
4.9(.193)
4.35(.171)
5.75(.226)
(2 circuits)
—
1,000
B 1B-XH-AM
2
B 2B-XH-AM
2.5( .098)
7.4( .291)
1,000
3
B 3B-XH-AM
5.0( .197)
9.9( .390)
1,000
4
B 4B-XH-AM
7.5( .295)
12.4( .488)
500
5
B 5B-XH-AM
10.0( .394)
14.9( .587)
500
6
B 6B-XH-AM
12.5( .492)
17.4( .685)
500
7
B 7B-XH-AM
15.0( .591)
19.9( .783)
500
8
B 8B-XH-AM
17.5( .689)
22.4( .882)
250
9
B 9B-XH-AM
20.0( .787)
24.9( .980)
250
10
B10B-XH-AM
22.5( .886)
27.4(1.079)
250
12
B12B-XH-AM
27.5(1.083)
32.4(1.276)
250
3.4
(.134) 7.0(.276)
Post: Brass, copper-undercoated, tin/lead-plated
Wafer: Nylon 66, UL94V-0, natural (white)
1.6
(.063)
Note: B1B-XH-AM is not UL/CSA/TÜ V approved.
1.0
(.039)dia.
[2.35(.093)]
(3 to 12 circuits)
2.5
(.098)
<For reference>
As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
ex.
2.0
(.079)
5.75(.226)
B1B-XH-AM-oo(blank)…natural (white)
BK…black R…red E…blue Y…yellow L…lemon yellow
M…green
5.75(.226)
3.4
(.134) 7.0(.276)
JST
0.64
(.025)
A
B
Q'ty /
box
Material and Finish
1.5(.059)
A
B
—
B
1.6
(.063)
2.45(.096)
1.5(.059)
2.45
(.096)
Dimensions mm(in.)
A
1
0.64(.025)
JST
Model No.
1.0
(.039)dia.
2.0
(.079)
99
XH
CONNECTOR
Through-hole type shrouded header on radial-tape –––––––––––––––––––––––––––––
TV4 type
(3 to 4 circuits)
2-TV4 type
(3 to 8 circuits)
7.4(.291)
6.75(.266)
A
2
–
3
4
B3B-XH-TV4
B4B-XH-TV4
5
–
6
–
7
–
8
–
0.64
(.025)
[0.7(.028)dia.]
0.64
(.025)
Dimensions mm(in.)
B
B2B-XH-2-TV4
B3B-XH-2-TV4
B4B-XH-2-TV4
B5B-XH-2-TV4
B6B-XH-2-TV4
B7B-XH-2-TV4
B8B-XH-2-TV4
6.75(.266)
2.8
(.110)
[0.7(.028)dia.]
Model No.
Circuits
2.5
(.098)
2.45
(.096)
6.75(.266)
7.0(.276)
2.8
(.110)
0.64
(.025)
B
A
2.5
2.45
(.096) (.098)
7.0(.276)
B
A
2.5
(.098)
7.0(.276)
2.45
(.096)
2-TV4 type
(2 circuits)
A
B
–
–
[0.7(.028)dia.]
Q'ty / box
1,000
5.0(.197)
9.9(.390)
1,000
7.5(.295)
12.4(.488)
500
10.0(.394)
14.9(.587)
500
12.5(.492)
17.4(.685)
500
15.0(.591)
19.9(.783)
500
17.5(.689)
22.4(.882)
500
Material and Finish
Post: Copper alloy, copper-undercoated, tin/lead-plated
Wafer: TV4 type/ Nylon 66, UL94V-0
2-TV4 type/ Glass-filled nylon 66, UL94V-0
<For reference>
As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
ex.
B2B-XH-2-TV4-oo(blank)…natural (ivory)
C…black (glass-filled) BK…black R…red E…blue Y…yellow
M…green
Taping specification of through-hole type shrouded header ––––––––––––––––––––––
6.75(.266)
6.0
18.0 (.236)
(.709)
20.0(.787)
9.0(.354)
2 and 3 circuits: 12.7(.500)
4 to 8 circuits: 25.4(1.000)
4.0(.157)dia.
2 circuits: 5.1(.201)
3 to 8circuits: 3.85(.152)
Note: Conforms to JIS C 0806.
100
2 circuits: 2.5(.098)
3 to 8circuits: 5.0(.197)
12.7(.500)
XH
CONNECTOR
Packaging specifications of through-hole type shrouded header ––––––––––––––––––
D
Package type
Flat pack (zig zag folded)
Distance between folds
24 indexing holes perfold (304.8mm/12")
Box size
(316x45x330mm)12.4"(W)x1.8"(D)x13.0"(H)
Distance between the end of the
tape and the first connector's
center line (either end)
TERMIN
H
ALS &
CONN
19.05mm(.750")
ECTORS
Products of different packaging specifications are also available.
Contact JST for details.
R
W
Distance between the end of the tape and
the first connector's center line (either end)
Tail tape
Lead tape
Through-hole type PC board layout (viewed from soldering side) and Assembly layout –––
Top entry type
Side entry type
[2.5
2.5±0.05
(.098±.002) (.098)min.]
7.0
(.276)
14.3(.563)
11.5(.453)
6.1
(.240)
9.8(.386)
[9.2
(.362)min.]
5.75
(.226)
3.4
(.134)min.
[2.5
2.5 ± 0.05
(.098 ± .002) (.098)min.]
0.9 + 0.1
0
(.035 + .004
)dia.
0
2 circuits:1.0±0.05(.039±.002)dia.
+.004
3 to 20 circuits:0.9 +0.1
)dia.
0 (.035 0
Top entry type with a boss
(1 circuit or more)
0.9
+0.1
0
(.035
)dia.
+0.2
0
(.043
+.008
0
)dia.
2 circuits:1.0±0.05(.039±.002)dia.
+.004
3 to 20 circuits:0.9 +0.1
0 (.035 0 )dia.
9.8(.386)
1.1
+.004
0
5.75
(.226)
2.5
2.5±0.05
1.6±0.05 (.098)min. (.098±.002)
(.063±.002)
)dia.
7.0
(.276)
+.004
0
3.4
(.134)min.
(.067
2.0±0.05
(.079±.002)
+0.1
0
4.35±0.05
(.171±.002)dia.
1.7
(2 circuits or more)
2 circuits:1.0±0.05(.039±.002)dia.
+.002
3 to 20 circuits:0.95 +0.05
)dia.
0 (.037 0
Note:
1. Tolerances are non-cumulative: ±0.05mm(±.002" ) for all centers.
2. Hole dimensions differ according to the kind of PC board and piercing method. If printed circuit boards made of hard material are used, the hole
dimensions should be larger. The dimensions above should serve as a guideline.
Contact JST for details.
101
XH
CONNECTOR
SMT type shrouded header –––––––––––––––––––––––––––––––––––––––––––––––––
Circuits
0.64
(.025)
Dimensions mm(in.)
Model No.
A
B
Q'ty /
reel
3
S3B-XH-SM3-TB
5.0(.197)
12.5(.492)
500
4
S4B-XH-SM3-TB
7.5(.295)
15.0(.591)
500
6
S6B-XH-SM3-TB
12.5(.492)
20.0(.787)
500
Material and Finish
5.5(.217)
Pin: Copper alloy, copper-undercoated, tin/lead-plated
Wafer: Nylon 46, UL94V-0, natural (white)
Solder tab: Brass, copper-undercoated, tin/lead-plated
Note: The products listed above are supplied on embossed-tape.
2.5(.098)
3.75(.148)
<For reference>
As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
A
B
7.0(.276)
[3.6(.142)]
6.0(.236)
ex.
S3B-XH-SM3-oo-TB(blank)…natural (white)
M…green R…red E…blue L…lemon yellow
Taping specifications of SMT type shrouded header ––––––––––––––––––––––––––––
Feeding direction
330 ±2.0(12.992±.079)dia.
Feeding direction
[13(.512)dia.]
Carrier tape
Cover tape leader
Leader part
100(3.937)min.
The end part Connector
160(6.299)min. mounting part 400(15.748)min.
2.0 ± 0.5
(.079 ± .020)
W1 +- 2.5
1.0
( +- .098
.039 )
(3 to 4 circuits)
(6 circuits)
1.55±0.05
(.061±.002)dia.
4.0±0.1
(.157±.004)
1.75±0.1
(.069±.004)
1.55±0.05
(.061±.002)dia.
4.0±0.1
(.157±.004)
2.0±0.1
(.079±.004)
2.0±0.1
(.079±.004)
1.75±0.1
(.069±.004)
Feeding direction
Feeding direction
Cover tape
F±0.1
(.004)
S
W±0.3(.012)
F±0.1
(.004)
S±0.1(.004)
W±0.3(.012)
Cover tape
Carrier tape
Carrier tape
16.0±0.1
(.630±.004)
16.0±0.1
(.630±.004)
Taping dimensions mm(in.)
Circuits
W1
Q'ty /
reel
F
S
3, 4
11.5(.453)
–
24.0( .945)
25.5(1.004)
500
6
14.2(.559)
28.4 (1.118)
32.0(1.260)
33.5(1.319)
500
102
W
Reel dimensions mm(in.)
Note:
1. Specifications conform to JIS C 0806. The tape width, connector recess
dimensions, etc. are determined by the number of circuits and external shape
of the connector to be loaded.
2. Specifications are subject to change without prior notice.
XH
CONNECTOR
SMT type PC board layout (viewed from component side) ––––––––––––––––––––––––––––
11.0(.433)
6.5(.256)
1.3(.051)
0.2
(.008)
3.9
(.154)
2.5(.098)
2.3
1.8
(.091) (.071)
End face of wafer
on the mating side
Note:
1. Tolerances are non-cumulative: ±0.05mm(±.002" ) for all centers.
2. The dimensions above should serve as a guideline. Contact JST for details.
Applicator for the semi-automatic press AP-K2N –––––––––––––––––––––––––––––––
Contact
SXH-001T-P0.6N
SXH-001T-P0.6
SXH-002T-P0.6
Crimp applicator MKS-L
with safety cover
without safety cover
Compact crimp applicator MKS-LS
with safety cover
without safety cover
Strip-crimp applicator MKS-SC
with safety cover
APLMK SXH001-06N
APLNC SXH001-06N
APLMKLS SXH001-06N
APLLSNC SXH001-06N
APLSC SXH001-06N
APLMK SXH001-06
APLNC SXH001-06
APLMKLS SXH001-06
APLLSNC SXH001-06
APLSC SXH001-06
APLMK SXH002-06
APLNC SXH002-06
APLMKLS SXH002-06
APLLSNC SXH002-06
APLSC SXH002-06
103
Similar pages