Green Low Loss CWDM LLCC Series Product Description Oplink’s Green Low Loss Coarse Wavelength Division Multiplexer is designed to meet industrial stringent size and loss requirement. Based on Thin-Film-Filter (TFF) and Micro-optics, this low loss CWDM features small form factor, ultra low insertion loss, high channel isolation, and unparallel reliability. The technology is a lead-free packaging platform and no epoxy in the optical path. The Green Low Loss CWDM is Telcordia GR-1221and GR-1209 qualified, and complied with industry green initiatives such as RoHS and WEEE. Performance Specificationns Typical Min Center Wavelength λC Refer to Channel Plan Below nm Small Form Factor 20 nm Environmental Green Plan Compliance nm Ultra-Low Insertion Loss nm High Reliability Channel Spacing 13 Channel Passband Insertion Loss within Passband 1) Unit 15 1260 1310 Upgrade Passband Max Features LLCC Series 1360 4ch CWDM 0.8 1.0 8ch CWDM 1.0 1.5 CWDM Upgrade (4ch CWDM only) 1.0 1.3 1310 Upgrade 0.6 0.8 0.3 0.5 Passband Ripple High Channel Isolation dB RoHS 6 Compliant dB Adjacent Channel Isolation 30 40 dB Non-adjacent Channel Isolation 45 50 dB 1310 Upgrade Isolation over CWDM Bands 40 45 dB CWDM Upgrade Isolation over CWDM Bands (4ch CWDM only) 13 15 dB Return Loss 45 50 dB Directivity 55 0.20 dB Polarization Mode Dispersion (PMD) 0.20 ps 300 mW Operating Power Operating Temperature -5 to +70 °C Storage Temperature -40 to +85 °C Package Dimensions Applications WDM System for Metro/Access Market dB Polarization Dependent Loss (PDL) Fiber Type Epoxy-Free Optical Path Corning SMF-28 3) Standard (250 or 900µm fiber jacket) 58.0 x 30.0 x9.6 Compact (250µm fiber jacket only) 52.0 x 27.5 x 7.6 mm Notes: [1] The maximum IL is under all states of polarization and within the full operating temperature and wavelength ranges specified. [2] All the parameters are without connectors. [3] The mechanical tolerance should be +/-0.2mm on all package dimensions unless otherwise custom specified Channel Plan 1471.0 1491.0 1511.0 1531.0 1551.0 1571.0 1591.0 1611.0 R04.20081119 Green Low Loss CWDM LLCC Series Mechanical Drawing / Package Dimensions (dimension in mm) 46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: [email protected] • www.oplink.com Standard Package Compact Package Note: port assignment will vary due to different configuration, please contact Oplink’s sales department for further information. Ordering Information Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s OEM design team or account manager for your requirements and ordering information (510) 933-7200. LLCC 0 2 Spacing 1310 Upg Port 20 nm = 2 W/O Upg = 0 W/ Upg = 1 0 Fiber Length* CWDM Upg Port 0.5 meter= H 1.0 meter= 1 1.5 meter= 5 2.0 meter= 2 8ch CWDM = 0 4ch W/O Upg = 1 4ch W/ Upg = 2 Fiber Jacket 250 μm bare fiber = 1 900 μm loose tube = 2 Package Channel Plan Standard package = S Compact package = C 8ch CWDM=00 4ch CWDM 1471~1531 = 01 4ch CWDM 1551~1611 = 02 4ch CWDM 1511~1571 = 03 4ch CWDM 1471/14911/1591/1611 = 04 Connector Type None = 1 FC/PC = 2 FC/SPC = 3 FC/APC = 4 SC/PC = 5 SC/SPC = 6 SC/APC = 7 ST = 8 LC = 9 MU = A *The tolerance of fiber length is +/-0.1m. 1 meter is standard. The lead-time for special fiber length will be longer. R04.20081119 Product Lines: Mux/Demux Switching/Routing Coupling/Splitting Monitoring/Conditioning Amplification Transmission Interconnect RGB Laser Modules