Oscillator · JCO · 3.3 V Pin Type Oscillator RoHS actual size General Data RoHS compliant Pb free: pins / pads Table 1: Frequency Stability Code stability code type JCO8 / JCO14 3.3 V frequency range 1.0 ~ 160.0 MHz (15pF max.) A B G C D E ± 100 ppm ± 50 ppm ± 30 ppm ± 25 ppm ± 20 ppm ± 15 ppm • O O O O O O O 1.0 ~ 50.00 MHz (15pF~30pF max.) -10 °C ~ +70 °C O frequency stability over all ± 15ppm ~ ± 100ppm (table 1) -40 °C ~ +85 °C see table 2 • • current consumption supply voltage VDC 3.3 V ± 10% temperature operating -10 °C ~ +70 °C / -40 °C ~ +85 °C storage -55 °C ~ +125 °C rise & fall time see table 3 load max 15pF / 30pF current max. 8mA low level max. +0.5 V high level min. VDC -0.5 V output 2002/95/EC ■ soldering temperature: 260 °C max. ■ metal package standard O on request Table 2: Current Consumption max. Current at 15pF load: Current at 30pF load: 1.0 ~ 29.9 MHz 30.0 ~ 49.9 MHz 50.0 ~ 89.9 MHz 90.0 ~ 124.9 MHz 125.0 ~ 160.0 MHz 1.0 ~ 29.9 MHz 30.0 ~ 50.0 MHz 10 mA 15 mA 30 mA 45 mA 60 mA 20 mA 35 mA Table 3: Rise & Fall Time max. output enable time max. 10ms output disable time max. 100ns start-up time max. 10ms standby function optional phase jitter 12 kHz ~ 20.0 MHz < 1.0ps RMS symmetry at 0.5 x VDC 45% ~ 55% typ. (40% ~ 60% max.) 6.0 ns: 1.0 ~ 49.9 MHz 5.0 ns: 50.0 ~ 79.9 MHz 4.0 ns: 80.0 ~ 99.9 MHz 3.0 ns: 100.0 ~ 160.0 MHz note: - specific data on request - rise time: 0.1 VDC ~ 0.9 VDC - fall time: 0.9 VDC ~ 0.1 VDC Dimensions JCO14 / JCO8 JCO14 15.24±0.2 JCO8 ø 0.55 max pin connection #1 #7 7.62±0.2 6.0 min. 12.8 5.3 0.8 20.4 #14 #8 12.8 top view not connected or e/d ground output supply voltage pin connection #1 #4 #8 #5 7.620.2 ø 0.55 max 6.0 min. 12.8 5.3 0.8 7.620.2 # 1: # 7: # 8: #14: # 1: # 4: # 5: # 8: not connected or e/d ground output supply voltage bottom view side view in mm Order Information O frequency type e/d function Oscillator 1.0 ~ 160.0 MHz JCO8 JCO14 2 = no 3 = yes/tristate Example: O 20.0-JCO8-3-A-3.3V-T1 frequency stability see table 1 supply voltage code option 3.3 V = 3.3 Volt blank = -10 °C ~ +70 °C T1 = -40 °C ~ +85 °C (LF = RoHS compliant / Pb free pins or pads) Jauch Quartz GmbH • e-mail: [email protected] full data can be found under: www.jauch.de / www.jauch.fr / www.jauchusa.com All specifications are subject to change without notice Oscillator · JCO · 3.3 V Enable / Disable Function Marking pin #1 pin #3 type open or high oscillation frequency gnd or low high impedance company code / date code Preferred Type 260 JCO8-3-B-3.3 JCO14-3-B-3.3 bath temperature (°C) Wave Soldering Profile 200 ca. 3.5 °C/s ca. 2.0 °C/s ca. 5.0 °C/s 150 100 50 0 20 60 100 140 180 220 time (seconds) Packaging JCO8-3-B JCO14-3-B packed in antistatic plastic tubes, 40 pcs packed in antistatic plastic tubes, 25 pcs note: parts are also suitable for soldering systems with lead (Pb) content Jauch Quartz GmbH • e-mail: [email protected] full data can be found under: www.jauch.de / www.jauch.fr / www.jauchusa.com All specifications are subject to change without notice