Bulletin PD-20584 rev. E 07/04 MBRS130TR SCHOTTKY RECTIFIER 1 Amp IF(AV) = 1.0 Amp VR = 30V Description/ Features Major Ratings and Characteristics Characteristics Value Units IF(AV) Rectangular waveform 1.0 A VRRM 30 V IFSM @ tp= 5 µs sine 230 A VF @ 1.0Apk, TJ= 125°C 0.42 V TJ range - 55 to 125 °C The MBRS130TR surface-mount Schottky rectifier has been designed for applications requiring low forward drop and small foot prints on PC boards. Typical applications are in disk drives, switching power supplies, converters, free-wheeling diodes, battery charging, and reverse battery protection. Small foot print, surface mountable Very low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability Case Styles MBRS130TR SMB www.irf.com 1 MBRS130TR Bulletin PD-20584 rev. E 07/04 Voltage Ratings Part number VR MBRS130TR Max. DC Reverse Voltage (V) 30 VRWM Max. Working Peak Reverse Voltage (V) Absolute Maximum Ratings Parameters Value Units Conditions IF(AV) Max. Average Forward Current 1.0 A 50% duty cycle @ TL = 147 °C, rectangular wave form IFSM 870 A 5µs Sine or 3µs Rect. pulse Max. Peak One Cycle Non-Repetitive Surge Current, T J = 25°C 50 EAS Non- Repetitive Avalanche Energy 3.0 mJ 10ms Sine or 6ms Rect. pulse IAR Repetitive Avalanche Current 1.0 A Value Units Following any rated load condition and with rated VRRM applied TJ = 25 °C, IAS = 1A, L = 6mH Current decaying linearly to zero in 1 µsec Frequency limited by TJ max. Va = 1.5 x Vr typical Electrical Specifications Parameters VFM IRM Max. Forward Voltage Drop (1) Max. Reverse Leakage Current (1) CT Max. Junction Capacitance LS Typical Series Inductance dv/dt Max. Voltage Rate of Change Conditions 0.6 V @ 1A 0.67 V @ 2A 0.42 V @ 1A 0.52 V @ 2A 0.5 mA TJ = 5.0 mA TJ = 100 °C 15 mA TJ = 125 °C 200 pF VR = 5VDC (test signal range 100KHz to 1Mhz) 25°C 2.0 nH Measured lead to lead 5mm from package body 10000 V/µs TJ = 25 °C TJ = 125 °C 25 °C VR = rated VR (Rated VR) (1) Pulse Width < 300µs, Duty Cycle < 2% Thermal-Mechanical Specifications Parameters Value Units °C TJ Max. Junction Temperature Range (*) - 55 to 125 Tstg Max. Storage Temperature Range - 55 to 150 RthJL Max. Thermal Resistance Junction to Lead RthJA Max. Thermal Resistance Junction to Ambient wt Approximate Weight Conditions °C 25 °C/W DC operation 80 °C/W DC operation (**) 0.10 (0.003) g (oz.) Case Style SMB Device Marking IR13 Similar to DO-214AA (*) dPtot 1 < thermal runaway condition for a diode on its own heatsink dTj Rth (j-a) (**) Mounted 1 inch square PCB 2 www.irf.com MBRS130TR Bulletin PD-20584 rev. E 07/04 10 TJ = 125°C 1 100°C 75°C 0.1 50°C 0.01 25°C 0.001 0.0001 T = 125˚C J 0 10 20 30 Reverse Voltage - VR (V) T = 25˚C J Fig. 2 - Typical Peak Reverse Current Vs. Reverse Voltage 1 1000 0.1 0.2 0.4 0.6 0.8 1 1.2 1.4 Forward Voltage Drop - V FM (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics Junction Capa citance - C T (pF) Instantaneous Forward Current - I F (A) Reverse Curent - I R (mA) 10 TJ = 25°C 100 10 0 10 20 30 Reverse Voltage - VR (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage www.irf.com 3 MBRS130TR Bulletin PD-20584 rev. E 07/04 0.7 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 DC 120 Average Power Loss (Watts) Allowable Lead Temperature (°C) 130 110 100 90 Square wave (D = 0.50) Rated Vr applied 80 see note (2) 70 0.6 0.5 0.4 RMS Limit D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 DC DC 0.3 0.2 0.1 0 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 0 Average Forward Current - I F(AV) (A) 1 1.2 1.4 1.6 Average Forward Current - I F(AV) (A) Fig. 5 - Maximum Average Forward Dissipation Vs. Average Forward Current Fig. 4 - Maximum Average Forward Current Vs. Allowable Lead Temperature 1000 Non-repetitive Surge Current - I FSM (A) 0.2 0.4 0.6 0.8 100 At Any Rated Load Condition And With Rated Vrrm Applied Following Surge 10 10 100 1000 10000 Square Wave Pulse Duration - t p (microsec) Fig. 6 - Maximum Peak Surge Forward Current Vs. Pulse Duration (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = I F(AV) x VFM @ (IF(AV) / D) (see Fig. 6); Pd REV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR 4 www.irf.com MBRS130TR Bulletin PD-20584 rev. E 07/04 Outline Table CATHODE Device Marking: IR13G 2.15 (.085) 1.80 (.071) 1 3.80 (.150) 3.30 (.130) 1 4.70 (.185) POLARITY ANODE 2 2 PART NUMBER 4.10 (.161) 2.5 TYP. (.098 TYP.) 2.40 (.094) 1.90 (.075) 0.30 (.012) 0.15 (.006) 1.30 (.051) 0.76 (.030) 5.60 (.220) 5.00 (.197) 2.0 TYP. (.079 TYP.) SOLDERING PAD 4.2 (.165) 4.0 (.157) Outline SMB Dimensions in millimeters and (inches) For recommended footprint and soldering techniques refer to application note #AN-994 Marking & Identification Each device has 2 rows for identification. The first row designates the device as manufactured by International Rectifier, indicated by the letters "IR", and the Part Number (indicates the current, the voltage rating and Schottky Generation). The second row indicates the year, the week of manufacturing and the Site ID. IR13 IR13 VOLTAGE CURRENT IR LOGO YYWWX SITE ID WEEK 2nd digit of the YEAR "Y" = 1st digit of the YEAR "standard product" "P" = "Lead-Free" www.irf.com 5 MBRS130TR Bulletin PD-20584 rev. E 07/04 Tape & Reel Information Dimensions in millimetres and (inches) Ordering Information Table Device Code MBR S 1 30 TR - 1 2 3 4 5 6 1 - Schottky MBR Series 2 - S = SMB 3 - Current Rating (1 = 1 A) 4 - Voltage Rating (30 = 30V) 5 - TR 6 - y none = Standard Production = Tape & Reel (3000 pieces) y PbF = Lead-Free Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 07/04 6 www.irf.com