HS2A THRU HS2M 2.0AMPS. HIGH EFFICIENCY PLASTIC RECTIFIERS FEATURE SMB（DO-214AA） .217(5.50) .193(4.9) .Low leakage .Low forward voltage drop .High current capability .High surge capability .High reliability .High temperature soldering guaranteed: 260℃/10 seconds at terminals. .For surface mounted application. .Easy pick and place. .083(2.11) .075(1.91) .155(3.94) .130(3.30) .185(4.70) .160(4.06) .012(0.305) .006(0.152) MECHANICAL DATA .103(2.60) .078(1.98) .Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C .Case: Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy .Polarity: color band denotes cathode .Mounting position: any .060((1.52) .032(0.80) .008(0.203) .002(0.051) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60Hz,resistive or inductive load. For capacitive load, derate current by 20% Type Number SYMBOL HS2A HS2B HS2D HS2F HS2G HS2J HS2K HS2M units Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 300 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 210 280 420 560 700 V Maximum DC blocking Voltage VDC 50 100 200 300 400 600 800 1000 V Maximum Average Forward Rectified Current .375"(9.5mm) lead length at TA =55°C IF(AV) 2.0 A IFSM 60 A Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous forward Voltage at 2.0A DC Maximum DC Reverse Current at rated DC blocking voltage @TA =25°C @TA =125°C VF 1.0 1.3 1.7 5.0 IR V µA 100.0 Maximum Reverse Recovery Time (Note 1) trr 50 75 ns Typical Junction Capacitance (Note 2) CJ 50 30 pF Typical Thermal Resistance (Note 3) R(JA) 75 °C /W Storage Temperature TSTG -55 to +150 °C TJ -55 to +150 °C Operation Junction Temperature Note: 1. Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 3. Measured on P.C.Board with 0.2×0.2”(5.0×5.0mm)Copper Pad Areas. - 201 -