Coilcraft MSS5131-183MLD Shielded power inductors - mss5131 Datasheet

Document 642-1
Shielded Power Inductors – MSS5131
• 5.1 × 5.1 mm footprint; 3.1mm high shielded inductors
• Low DCR and excellent current handling
Designer’s Kit C362 contains 3 of each value
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant matte tin over nickel over phos
bronze (current production) or gold over nickel over phos bronze (prior
production). Other terminations available at additional cost.
Weight 0.20 – 0.24 g
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 600/7″ reel, 2500/13″ reel; Plastic tape: 12 mm wide,
0.35 mm thick, 8 mm pocket spacing, 3.25 mm pocket depth
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
DCR
Inductance2 max
Part number1
±20% (µH) (Ohms)
MSS5131-222ML_
2.2
0.020
MSS5131-332ML_
3.3
0.028
MSS5131-472ML_
4.7
0.038
MSS5131-562ML_
5.6
0.042
MSS5131-682ML_
6.8
0.050
MSS5131-822ML_
8.2
0.058
MSS5131-103ML_
10
0.070
MSS5131-123ML_
12
0.080
MSS5131-153ML_
15
0.100
MSS5131-183ML_
18
0.120
MSS5131-223ML_
22
0.145
MSS5131-273ML_
27
0.161
MSS5131-333ML_
33
0.200
MSS5131-393ML_
39
0.215
MSS5131-473ML_
47
0.270
MSS5131-563ML_
56
0.280
MSS5131-683ML_
68
0.368
MSS5131-823ML_
82
0.420
MSS5131-104ML_ 100
0.580
MSS5131-124ML_ 120
0.610
MSS5131-154ML_ 150
0.820
MSS5131-184ML_ 180
1.00
MSS5131-224ML_ 220
1.10
MSS5131-274ML_ 270
1.43
MSS5131-334ML_ 330
1.58
MSS5131-394ML_ 390
1.80
SRF
typ3
(MHz)
65.0
60.0
48.0
44.0
42.0
40.0
38.0
35.0
32.0
26.0
22.0
19.0
18.0
17.0
16.0
15.0
12.5
12.0
11.5
11.0
10.0
9.0
8.0
7.5
6.8
5.4
Isat (A)4 Irms (A)5
10% 20% 30% 20°C 40°C
drop drop drop rise rise
1.76 2.08 2.30 2.00 3.30
1.33 1.58 1.73 1.60 2.90
1.08 1.32 1.42 1.40 2.50
1.00 1.20 1.30 1.30 2.30
0.98 1.14 1.24 1.20 2.16
0.90 1.04 1.18 1.10 2.00
0.85 0.98 1.13 1.00 1.90
0.72 0.85 0.94 0.97 1.60
0.67 0.78 0.86 0.94 1.50
0.61 0.72 0.79 0.89 1.40
0.54 0.64 0.70 0.87 1.30
0.48 0.56 0.62 0.85 1.20
0.44 0.52 0.58 0.80 1.10
0.42 0.50 0.55 0.74 1.00
0.38 0.46 0.51 0.71 0.95
0.34 0.42 0.47 0.70 0.90
0.31 0.38 0.42 0.66 0.85
0.27 0.32 0.35 0.62 0.80
0.26 0.30 0.33 0.55 0.69
0.23 0.27 0.30 0.51 0.62
0.21 0.26 0.28 0.47 0.58
0.19 0.23 0.25 0.43 0.54
0.18 0.21 0.23 0.39 0.50
0.15 0.18 0.20 0.35 0.45
0.13 0.17 0.19 0.32 0.42
0.12 0.15 0.16 0.30 0.38
1. Please specify termination and packaging codes:
MSS5131-394MLC
Termination: L = RoHS compliant matte tin over nickel
over phos bronze (current production)
or gold over nickel over phos bronze
(prior production).
Special order:
T = RoHS tin-silver-copper (95.5/4/0.5)
over gold over nickel over phos bronze
or S = non-RoHS tin-lead (63/37) over
gold over nickel over phos bronze.
Packaging: C= 7″ machine-ready reel EIA-481 embossed plastic tape (600 per full reel).
B= Less than full reel In tape, but not
machine-ready. To have a leader and
trailer added ($25 charge), use code
letter C instead.
D= 13″ machine-ready reel EIA-481
embossed plastic tape. Factory order
only, not stocked (2500 per reel per
full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an
Agilent/HP 4263B LCR meter or equivalent.
3. SRF measured using Agilent/HP 4191A or equilvalent.
4.DC current at which the inductance drops the specified
amount from its value without current.
5. Current that causes the specified temperature rise from
25°C ambient.
6. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Document 642-1
Revised 03/01/12
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 642-2
Shielded Power Inductors – MSS5131
Typical L vs Frequency
Typical L vs Current
1000
1000
390 µH
100 µH
100
Inductance (µH)
Inductance (µH)
390 µH
10 µH
10
100 µH
100
10 µH
10
2.2 µH
1
0.01
2.2 µH
1
0.1
1
10
0.01
Irms Derating
1
0.1
10
Frequency (MHz)
Current (A)
0.200*
5,1
120
110
123
90
0.200*
5,1
80
70
* Dimensions are of the case not
60
50
0.122
max
3,1
40
25°C
Percent of rated Irms
100
30
20
0.181
4,6
10
0
including the termination. For
maximum overall dimensions
including the termination, add
0.035 in / 0,9 mm.
-40
-20
0
20
40
60
80
100
120 140
0.200
5,08
0.063
1,6
Ambient temperature (°C)
0.069
1,74
0.200
5,08
0.181
4,6
0.159 ∅
4,05
inches
Dimensions are in
mm
US +1-847-639-6400 [email protected]
UK +44-1236-730595 [email protected]
Taiwan +886-2-2264 3646 [email protected]
China +86-21-6218 8074 [email protected]
Singapore + 65-6484 8412 [email protected]
Recommended
Land Pattern
Document 642-2
Revised 03/01/12
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Similar pages