Marketing Bulletin DATE: May 1st, 2008 TO: All Sales Personnel FROM: Isaac Gonzalez RE: Product Termination To all concerned parties, This bulletin is to notify all customers of the discontinuation of the following Ecliptek series effective May 1st, 2008: Series EC1 EC2 Description Resistance Welded Short HC-49/US Crystal Resistance Welded HC-49/US Crystal Recommended Replacement E1U Series E2U Series In compliance with our End of Life (EOL) policy, this will serve as advanced notice of product termination. New orders will not be accepted after September 1st, 2009, with delivery to conclude by December 31st, 2009. If there are any questions pertaining to this bulletin, please feel free to contact me. Thank you again for your cooperation. Best Regards, Isaac Gonzalez Configuration Manager Ecliptek Corporation 3545 CADILLAC AVENUE • COSTA MESA, CA 92626-1401 • (714) 433-1200 • Fax (714) 433-1234 EC1 Series EC1 • HC-49/US short package • AT or BT cut available • Resistance weld seal • Tight tolerance/stability • Tape and reel, insulator tab, and custom lead length options available H 2.50 L 11.18 W 4.70 CRYSTAL NOTES __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ OBSOLETE __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ELECTRICAL SPECIFICATIONS Frequency Range 3.579545MHz to 50.000MHz Frequency Tolerance / Stability ±50ppm / ±100ppm (Standard), ±30ppm / ±50ppm (AT cut only), ±15ppm / ±30ppm (AT cut only), Over Operating Temperature Range ±15ppm / ±20ppm (AT cut only), or ±10ppm / ±15ppm (AT cut only) Operating Temperature Range 0°C to 70°C (Standard), -20°C to 70°C (AT cut only), or -40°C to 85°C (AT cut only) Aging (at 25°C) ±5ppm / year Maximum Storage Temperature Range -40°C to 85°C Shunt Capacitance 7pF Maximum Insulation Resistance 500 Megaohms Minimum at 100VDC Drive Level 1 mWatt Maximum Load Capacitance (CL) 18pF (Standard), Custom CL ≥10pF, or Series Resonant EQUIVALENT SERIES RESISTANCE (ESR), MODE OF OPERATION (MODE), AND CUT Frequency Range ESR (Ω) Mode / Cut Frequency Range ESR (Ω) Mode / Cut 3.579545MHz to 4.999MHz 200 Max Fundamental / AT 15.000MHz to 15.999MHz 60 Max Fundamental / AT 5.000MHz to 5.999MHz 150 Max Fundamental / AT 16.000MHz to 23.999MHz 50 Max Fundamental / AT 6.000MHz to 7.999MHz 120 Max Fundamental / AT 24.000MHz to 30.000MHz 40 Max Fundamental / AT 8.000MHz to 8.999MHz 90 Max Fundamental / AT 24.000MHz to 40.000MHz 40 Max Fundamental / BT 9.000MHz to 9.999MHz 80 Max Fundamental / AT 28.6363MHz to 29.999MHz 150 Max Third Overtone / AT 10.000MHz to 14.999MHz 70 Max Fundamental / AT 30.000MHz to 50.000MHz 100 Max Third Overtone / AT MANUFACTURER CATEGORY SERIES PACKAGE CLASS REV.DATE ECLIPTEK CORP. CRYSTAL EC1 HC-49/US Short CR22 03/06 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. PART NUMBERING GUIDE EC1 A - T - 20 - 30.000M - I2 TR PACKAGING OPTIONS Blank=Bulk, A=Tray, TR=Tape and Reel FREQUENCY TOLERANCE / STABILITY Blank=±50ppm at 25°C, ±100ppm from 0°C to 70°C A=±50ppm at 25°C, ±100ppm from -20°C to 70°C B=±50ppm at 25°C, ±100ppm from -40°C to 85°C C=±30ppm at 25°C, ±50ppm from 0°C to 70°C D=±30ppm at 25°C, ±50ppm from -20°C to 70°C E=±30ppm at 25°C, ±50ppm from -40°C to 85°C F=±15ppm at 25°C, ±30ppm from 0°C to 70°C G=±15ppm at 25°C, ±30ppm from -20°C to 70°C H=±15ppm at 25°C, ±30ppm from -40°C to 85°C J=±15ppm at 25°C, ±20ppm from 0°C to 70°C K=±15ppm at 25°C, ±20ppm from -20°C to 70°C L=±15ppm at 25°C, ±20ppm from -40°C to 85°C M=±10ppm at 25°C, ±15ppm from 0°C to 70°C N=±10ppm at 25°C, ±15ppm from -20°C to 70°C MECHANICAL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS AVAILABLE OPTIONS Blank=None (Standard) CLXXX=Custom Lead Length (See Page 42) I2=Insulator Tab (See Page 42) FREQUENCY LOAD CAPACITANCE Blank=18pF (Standard), S=Series XX=XXpF (Custom) MODE OF OPERATION / CRYSTAL CUT Blank=Fundamental / AT B=Fundamental / BT T=Third Overtone / AT OBSOLETE TAPE AND REEL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS MARKING SPECIFICATIONS ENVIRONMENTAL/MECHANICAL SPECIFICATIONS PARAMETER SPECIFICATION Fine Leak Test Gross Leak Test Mechanical Shock Vibration Lead Integrity Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2004 MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-883, Method 210 MIL-STD-883, Method 215 1000 Pieces per Reel Compliant to EIA-468B Line 1: E XX.XXX M M or Blank (No Marking) Frequency in MHz (5 Digits Maximum + Decimal) MANUFACTURER CATEGORY SERIES PACKAGE CLASS REV.DATE ECLIPTEK CORP. CRYSTAL EC1 HC-49/US Short CR22 03/06 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. EC2 Series EC2 • HC-49/US package • AT or BT cut available • Resistance weld seal • Tight tolerance/stability • Tape and reel, insulator tab, and custom lead length options available H 3.68 L 11.18 W 4.70 CRYSTAL NOTES __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ OBSOLETE __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ELECTRICAL SPECIFICATIONS Frequency Range 3.579545MHz to 50.000MHz Frequency Tolerance / Stability ±50ppm / ±100ppm (Standard), ±30ppm / ±50ppm (AT cut only), ±15ppm / ±30ppm (AT cut only), Over Operating Temperature Range ±15ppm / ±20ppm (AT cut only), or ±10ppm / ±15ppm (AT cut only) Operating Temperature Range 0°C to 70°C (Standard), -20°C to 70°C (AT cut only), or -40°C to 85°C (AT cut only) Aging (at 25°C) ±5ppm / year Maximum Storage Temperature Range -40°C to 85°C Shunt Capacitance 7pF Maximum Insulation Resistance 500 Megaohms Minimum at 100VDC Drive Level 1 mWatt Maximum Load Capacitance (CL) 18pF (Standard), Custom CL ≥10pF, or Series Resonant EQUIVALENT SERIES RESISTANCE (ESR), MODE OF OPERATION (MODE), AND CUT Frequency Range ESR (Ω) Mode / Cut Frequency Range ESR (Ω) Mode / Cut 3.579545MHz to 4.999MHz 200 Max Fundamental / AT 15.000MHz to 15.999MHz 60 Max Fundamental / AT 5.000MHz to 5.999MHz 150 Max Fundamental / AT 16.000MHz to 23.999MHz 50 Max Fundamental / AT 6.000MHz to 7.999MHz 120 Max Fundamental / AT 24.000MHz to 30.000MHz 40 Max Fundamental / AT 8.000MHz to 8.999MHz 90 Max Fundamental / AT 24.000MHz to 40.000MHz 40 Max Fundamental / BT 9.000MHz to 9.999MHz 80 Max Fundamental / AT 28.6363MHz to 29.999MHz 150 Max Third Overtone / AT 10.000MHz to 14.999MHz 70 Max Fundamental / AT 30.000MHz to 50.000MHz 100 Max Third Overtone / AT MANUFACTURER CATEGORY SERIES PACKAGE CLASS ECLIPTEK CORP. CRYSTAL EC2 HC-49/US CR04 800-ECLIPTEK www.ecliptek.com for latest revision REV.DATE 03/06 Specifications subject to change without notice. PART NUMBERING GUIDE EC2 A - T - 20 - 30.000M - I2 TR FREQUENCY TOLERANCE / STABILITY Blank=±50ppm at 25°C, ±100ppm from 0°C to 70°C A=±50ppm at 25°C, ±100ppm from -20°C to 70°C B=±50ppm at 25°C, ±100ppm from -40°C to 85°C C=±30ppm at 25°C, ±50ppm from 0°C to 70°C D=±30ppm at 25°C, ±50ppm from -20°C to 70°C E=±30ppm at 25°C, ±50ppm from -40°C to 85°C F=±15ppm at 25°C, ±30ppm from 0°C to 70°C G=±15ppm at 25°C, ±30ppm from -20°C to 70°C H=±15ppm at 25°C, ±30ppm from -40°C to 85°C J=±15ppm at 25°C, ±20ppm from 0°C to 70°C K=±15ppm at 25°C, ±20ppm from -20°C to 70°C L=±15ppm at 25°C, ±20ppm from -40°C to 85°C M=±10ppm at 25°C, ±15ppm from 0°C to 70°C N=±10ppm at 25°C, ±15ppm from -20°C to 70°C MECHANICAL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS PACKAGING OPTIONS Blank=Bulk, A=Tray, TR=Tape and Reel AVAILABLE OPTIONS Blank=None (Std) CLXXX=Custom Lead Length (See Page 42) I2=Insulator Tab (See Page 42) FREQUENCY LOAD CAPACITANCE Blank=18pF (Standard), S=Series XX=XXpF (Custom) MODE OF OPERATION / CRYSTAL CUT Blank=Fundamental / AT B=Fundamental / BT T=Third Overtone / AT OBSOLETE TAPE AND REEL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS MARKING SPECIFICATIONS ENVIRONMENTAL/MECHANICAL SPECIFICATIONS PARAMETER SPECIFICATION Fine Leak Test Gross Leak Test Mechanical Shock Vibration Lead Integrity Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2004 MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-883, Method 210 MIL-STD-883, Method 215 1000 Pieces per Reel Compliant to EIA-468B Line 1: E XX.XXX M M or Blank (No Marking) Frequency in MHz (5 Digits Maximum + Decimal) MANUFACTURER CATEGORY SERIES PACKAGE CLASS REV.DATE ECLIPTEK CORP. CRYSTAL EC2 HC-49/US CR04 03/06 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice.