2.7x3.4mm SURFACE MOUNT LED LAMP AA2734ESGC HIGH EFFICIENCY RED SUPER BRIGHT GREEN Features z z z z z z z Description 2.7mm X 3.4mm SMT LED, 1.5mm HEIGHT ONLY. BOTH CHIPS CAN BE CONTROLLED SEPARATELY. SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER PROCESS. The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode. The Super Bright Green source color devices are made with AVAILABLE ON TAPE AND REEL. Gallium Phosphide Green Light Emitting Diode. IDEAL FOR BACKLIGHTING. PACKAGE: 1000PCS / REEL. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAD1240 REV NO: V.3 DATE: MAY/04/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN PAGE: 1 OF 5 ERP: 1201000048 Selection Guide Part No. Dice Iv (mcd) @ 20mA Lens Type HIGH EFFICIENCY RED (GaAsP/GaP) AA2734ESGC Viewing Angle Typ. 7 30 7 30 Units Test Conditions WATER CLEAR SUPER BRIGHT GREEN (Gap) 2θ1/2 Min. 120° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Max. λpeak Peak Wavelength High Efficiency Red Super Bright Green 627 565 nm IF=20mA λD Dominant Wavelength High Efficiency Red Super Bright Green 625 568 nm IF=20mA ∆λ1/2 Spectral Line Half-width High Efficiency Red Super Bright Green 45 30 nm IF=20mA C Capacitance High Efficiency Red Super Bright Green 15 15 pF VF=0V;f=1MHz VF Forward Voltage High Efficiency Red Super Bright Green 2.0 2.2 2.5 2.5 V IF=20mA IR Reverse Current All 10 uA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter High Efficiency Red Super Bright Green Units Power dissipation 105 105 mW DC Forward Current 30 25 mA Peak Forward Current [1] 160 140 mA Reverse Voltage 5 V Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD1240 REV NO: V.3 DATE: MAY/04/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN PAGE: 2 OF 5 ERP: 1201000048 AA2734ESGC High Efficiency Red SPEC NO: DSAD1240 REV NO: V.3 DATE: MAY/04/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN PAGE: 3 OF 5 ERP: 1201000048 Super Bright Green SPEC NO: DSAD1240 REV NO: V.3 DATE: MAY/04/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN PAGE: 4 OF 5 ERP: 1201000048 AA2734ESGC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAD1240 REV NO: V.3 DATE: MAY/04/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN PAGE: 5 OF 5 ERP: 1201000048