SMD1206 Series Resettable Fuse PTC Features Radial leaded devices. Over-current protection High voltage surge capabilities Flame retardant epoxy polymer insulating material meets UL94 V-0 requirement. Available in lead-free version. Meets MSL level 1, per J-STD-020 JK-nSMD005 Dimensions(3216mm / 1206 mils) Unit: mm Model A Fast Delivery Time B C D E(max) Min max Min Max Min Max Min Min JK-nSMD005 3.00 3.50 1.50 1.80 0.60 1.10 0.15 0.10 JK-nSMD010 3.00 3.50 1.50 1.80 0.60 1.10 0.15 0.10 JK-nSMD020 3.00 3.50 1.50 1.80 0.40 0.90 0.15 0.10 JK-nSMD025 3.00 3.50 1.50 1.80 0.40 0.90 0.15 0.10 JK-nSMD035 3.00 3.50 1.50 1.80 0.40 0.90 0.15 0.10 JK-nSMD050 3.00 3.50 1.50 1.80 0.40 0.90 0.15 0.10 JK-nSMD075 3.00 3.50 1.50 1.80 0.35 0.85 0.15 0.10 JK-nSMD100 3.00 3.50 1.50 1.80 0.40 1.20 0.15 0.10 JK-nSMD150 3.00 3.50 1.50 1.80 0.75 1.80 0.15 0.10 JK-nSMD200 3.00 3.50 1.50 1.80 0.50 1.80 0.15 0.10 1 HUAAN LIMITED Picture www.huaandz.com SMD1206 Series Electrical characteristics(25℃) Part Number Ih (A) Vmax( V) Imax (A) Pd(W) Trip Current(A) JK-nSMD005 0.05 0.15 60.0 100 0.4 0.3 1.50 3.600 50.000 JK-nSMD010 0.10 0.25 60.0 100 0.4 0.5 1.00 1.600 15.000 JK-nSMD020 0.20 0.46 16.0 100 0.6 8.0 0.08 0.350 15.000 JK-nSMD025 0.25 0.50 16.0 100 0.6 8.0 0.08 0.350 2.500 JK-nSMD035 0.35 0.75 6.0 100 0.6 8.0 0.10 0.250 1.300 JK-nSMD050 0.50 1.00 6.0 100 0.6 8.0 0.10 0.150 0.700 JK-nSMD050-13.2V 0.50 1.00 6.0 100 0.6 8.0 0.10 0.150 0.700 JK-nSMD075 0.75 1.50 6.0 100 0.6 8.0 0.20 0.090 0.500 JK-nSMD100 1.00 1.80 6.0 100 0.6 8.0 0.30 0.055 0.270 JK-nSMD150 1.50 3.00 6.0 100 0.8 8.0 1.00 0.040 0.130 JK-nSMD200 2.00 3.50 6.0 100 0.8 8.0 1.50 0.018 0.08 It(A) Trip Rmin Time(S) (Ω） R1max (Ω) ·IH = Hold current: maximum current device will pass without tripping in 25℃ still air. ·IT = Trip current: minimum current at which the device will trip in 25℃ still air. ·VMAXi = Maximum interrupt voltage device can withstand without damage at rated current. ·IMAX = Maximum fault current device can withstand without damage at rated voltage. ·RMAX = Maximum resistance of device in initial (un-soldered) state. ·RMIN = Minimum resistance of device in initial (un-soldered) state. Operating temperature: -40℃ ~+85℃ Packing quantity: 005,010,100,150,200, Packing quantity: 020,025,035,050,075, 3500PCS/Reel 5000PCS/Reel [email protected] Specifications are subject to change without notice HUAAN LIMITED 2 www.huaandz.com Tel:+86-755-27465585