Omron B3F-1150 Tactile switch Datasheet

Tactile Switch
B3F
Miniature, Space-Saving Tactile Switch Provides
Long Service Life and Easy Mounting
• Extended mechanical/electrical service life: 10 x 106 operations for
12 x 12 mm type and 1 x 106 operations for the 6 x 6 mm type
• Ideal for applications such as audio, office and communications equipment, measuring instruments, TVs, VCRs, etc.
• Taped radial type, vertical type and high force types are available.
• Gold plated models available for increased contact reliability, resistance to corrosive gas and insulation fault prevention for ion migration in harsh environments
• RoHS Compliant
Ordering Information
■ B3F-1@@@, B3F-3@@@
6 x 6 mm type
Type
Plunger
Switch height
Operating force
Model
Without ground terminal With ground terminal
Standard
Flat
Projected
Vertical
Flat
Projected
Bags
Bags
4.3 mm
General-purpose: 100 g
150 g
B3F-1000
B3F-1002
B3F-1100
B3F-1102
High-force:
260 g
B3F-1005
B3F-1105
5.0 mm
General-purpose: 100 g
150 g
B3F-1020
B3F-1022
B3F-1120
B3F-1122
High-force:
B3F-1025
B3F-1125
5.0 mm (7.5 mm pitch)
General-purpose: 100 g
260 g
—
B3F-1110
7.3 mm
General-purpose: 100 g
150 g
B3F-1050
B3F-1052
B3F-1150
B3F-1152
High-force:
B3F-1055
B3F-1155
260 g
3.15 mm
General-purpose: 100 g
150 g
—
—
B3F-3100
B3F-3102
High-force:
260 g
—
B3F-3105
3.85 mm
General-purpose: 100 g
150 g
—
—
B3F-3120
B3F-3122
High-force:
260 g
—
B3F-3125
6.15 mm
General-purpose: 100 g
150 g
—
—
B3F-3150
B3F-3152
High-force:
—
B3F-3155
260 g
Important Note:Switches cannot be water-washed.
Tactile Switch
B3F
221
■ B3F-1@@@-G
6 x 6 mm type with Gold Plating
Type
Plunger
Switch height
Form of shipment
operating force
Model
Without ground terminal
With ground terminal
Bags (100 Switches)
6 x 6 mm switches
with gold plating
Flat
4.3 mm
180 g
5.0 mm
B3F-1002-G
B3F-1102-G
B3F-1022-G
B3F-1122-G
Note: The minimum order is 100 Switches. Order in multiples of the minimum order.
■ B3F-4@@@, B3F-5@@@
12 x 12 mm type
Type
Plunger
Switch height
Operating force
Model
Without ground terminal With ground terminal
Standard
Flat
Projected
Long service life
High reliability
gold-plated
contact
4.3 mm
7.3 mm
Bags
B3F-4000
B3F-4100
High-force:
260 g
B3F-4005
B3F-4105
General-purpose: 130 g
B3F-4050
B3F-4150
High-force:
260 g
B3F-4055
B3F-4155
General-purpose: 130 g
B3F-5000
B3F-5100
Flat
4.3 mm
Projected
7.3 mm
B3F-5050
B3F-5150
Flat
4.3 mm
B3F-5001
B3F-5101
Projected
7.3 mm
B3F-5051
B3F-5151
Important Note: Switches cannot be water-washed.
222
Bags
General-purpose: 130 g
Tactile Switch
B3F
■ B3F-6@@@
Taped Radial (Auto Insertion)
6 x 6 mm type
Type
Plunger
Switch height
Operating force
Model
B3F-6000
Flat
4.3 mm
General-purpose: 100 g
B3F-6000
B3F-6100
High-force:
150 g
B3F-6002
B3F-6102
General-purpose: 100 g
B3F-6020
B3F-6120
High-force:
150 g
B3F-6022
B3F-6122
General-purpose: 100 g
B3F-6050
B3F-6150
High-force:
B3F-6052
B3F-6152
Without ground terminal With ground terminal
5.0 mm
Projected
7.3 mm
150 g
Note: The above switches must be ordered in units of 1,000.
Important Note: Switches cannot be water-washed.
■ Accessories
See “B32” Tactile Switch Key Top data sheet for keycaps that fit projected plunger B3F models.
■ Plunger Identification Tables
Use these tables to determine tactile switch type by plunger color.
B3F-1@@@/-3@@@/-6@@@
Plunger color
Operating force
Ivory
100 g
B3F-1000, 1100, 1050, 1150, 3100, 3150, 6000, 6100, 6050, 6150
Black
100 g
B3F-1020, 1120, 1110, 3120, 6020, 6120
Yellow
Gray
Type
150 g
B3F-1002, 1102, 1052, 1152, 3102, 3152, 6002, 6102, 6052, 6152
180 g
B3F-1002-G, 1102-G
150 g
B3F-1022, 1122, 3122, 6022, 6122
180 g
B3F-1022-G, 1122-G
Orange
260 g
B3F-1005, 1105, 1055, 1155, 3105, 3155, 6005, 6055
Pink
260 g
B3F-1025, 1125, 3125, 6025
B3F-4@@@/-5@@@
Plunger color
Operating force
Type
Ivory
130 g
B3F-4000, 4100, 4050, 4150
Yellow
260 g
B3F-4005, 4105, 4055, 4155
Blue
130 g
B3F-5000 Series
Tactile Switch
B3F
223
Specifications
■ Characteristics
Part Number
B3F-1@@@
B3F-3@@@
B3F-4@@@
B3F-5@@@
B3F-6@@@
B3F-1@@@-G
Contact form
SPST-NO
Switching capacity
1 to 50 mA, 5 to 24 VDC (resistive load)
100 μA to 50 mA,
5 to 24 VDC
(resistive load)
Contact resistance
100 MΩ max. (rated: 1mA, 5VDC)
100 MΩ max.
(rated: 100 μA, 5 VDC)
Insulation resistance
100 MΩ min. (at 250 VDC)
Dielectric strength
500 VAC, 50/60 Hz for 1 minute
Bounce time
5 ms max.
Vibration resistance
Malfunction durability: 10 to 55 Hz, 1.5 mm double amplitude for 30 to 60 s
Shock resistance
Mechanical durability: 1,000 m/s2 (approx. 100 G)
Malfunction durability: 100 m/s2 (approx. 10 G)
Ambient operating
temperature
-25° to 70°C (at 60% RH max.) with no icing or condensation
Ambient operating
humidity
35% to 85% RH (at 5 to 35 °C)
Weight
Approx. 0.25 g
Approx. 0.85 g
Approx. 0.25 g
Note: Data shown are of initial value.
■ Life Expectancy
B3F-1000, B3F-3000, B3F-6000:
1,000,000 operations min (OF: 100gf) (B3F-1070: 500,000 operations min)
300,000 operations min (OF: 150 gf)
100,000 operations min (OF: 260gf)
B3F-G:
300,000 operations min (OF: 180gf)
B3F-4000:
3,000,000 operations min (OF: 130gf)
1,000,000 operations min (OF: 260gf)
B3F-5000:
10,000,000 operations min.
■ Operating Characteristics
Characteristics
Part Number
B3F-1@@@ / -3@@@
General
purpose type
Operating force (OF)
Release force (RF) min.
B3F-6@@@
B3F-1@@@-G
High force
type
General
purpose type
High force
type
General
purpose type
High force
type
General
purpose type
100 ± 30 g
150 ± 50 g
260 ± 70 gf
130 ± 50 g
260 ± 70 g
100 ± 30 g
150 ± 50 g
180 ± 50 g
20 g
50 g
50 gf
30 g
50 g
20 g
50 g
50 g
Pretravel (PT)
224
B3F-4@@@ / -5@@@
Tactile Switch
0.25 +0.2/-0.1 mm
B3F
0.3 +0.2/-0.1 mm
0.25 +0.2/-0.1 mm
Dimensions
Note: 1. Unless otherwise specified, all units are in millimeters and a tolerance of ± 0.4 mm applies to all dimensions.
2. Terminal numbers are not indicated on this switch. With the switch turned over so that the logo mark “OMRON” is visible on the upper
part of the rear side of the switch base, the terminal on the right of the logo mark is numbered “1” and that on the bottom right is “3.”
Accordingly, two terminals on the left side are numbered “2” and “4” respectively.
■ 6 x 6 mm Models
Standard, Flat Plunger Type
(without Ground Terminal)
Standard, Projected Plunger Type
(without Ground Terminal)
B3F-1000, B3F-1002, B3F-1005, B3F-1020*, B3F-1022*,
B3F-1025*, B3F-1002-G, B3F-1022-G*
B3F-1050, B3F-1052, B3F-1055
PCB Mounting (Top View)
(Single-sided PCB, t=1.6)
6±0.2
6±0.2
PCB Mounting (Top View)
(Single-sided PCB, t=1.6)
6±0.2
6±0.2
4.5±0.2
4.5±0.2
4.5±0.2
4.5±0.1
6.5±0.1
3.4
4
3.5
6.5±0.1
1.8±0.1
7.3±0.2
4.3±0.2
3
0.3
Terminal Arrangement/Internal
Connections (Top View)
3.4
4
3
2
1
3.5
6.5±0.5
0.7
7.7±0.5
0.7
2
0.3
1
6.5±0.5
0.7
7.7±0.5
* The height of B3F-1020, B3F-1022, B3F-1025, and B3F-1026 is 5±0.2 mm.
0.7
Standard, Flat Plunger Type
(with Ground Terminal, Pitch: 6.5 mm)
Standard, Projected Plunger Type
(with Ground Terminal)
B3F-1100, B3F-1102, B3F-1105, B3F-1120*, B3F-1122*,
B3F-1125*, B3F-1102-G, B3F-1122-G*
B3F-1150, B3F-1152, B3F-1155
PCB Mounting (Top View)
(Single-sided PCB, t=1.6)
6±0.2
6±0.2
Four,
1±0.05 dia.
Four, 1±0.1 dia.
Terminal Arrangement
/Internal Connections (Top View)
(See note.)
4.3±0.2
3.5 dia.
2.4 2.4±0.1
3.5
dia.
PCB Mounting (Top View)
(Single-sided PCB, t=1.6)
6±0.2
6±0.2
4.5±0.2
4.5±0.1
4.5±0.2
4.1±0.1
4.5±0.1
1.5
4.1±0.1
3.5
dia.
Five, 1±0.05 dia.
1.5
2.4 2.4±0.1
3.5 dia.
Five, 1±0.05 dia.
6.5±0.1
(See note.)
4.3±0.2
6.5±0.1
3.4
3.5
0.3
4
0.7
0.7
6.5±0.5
7.7±0.5
Terminal Arrangement/
Internal Connections
(Top View)
1.8±0.1
Terminal Arrangement/Internal
Connections (Top View)
7.3±0.2
4.3±0.2
3.4
4
3
0.7
3
3.5
0.3
0.3
2
*The height of B3F-1120, B3F-1122, and
B3F-1125 is 5±0.2 mm.
1
2
0.7
6.5±0.5
7.7±0.5
5
0.7
0.7
1
5
0.3
Standard, Flat Plunger Type
(with Ground Terminal, Pitch: 7.5 mm)
B3F-1110
6±0.2
PCB Mounting (Top View)
(Single-sided PCB, t=1.6)
6±0.2
4.5±0.2
Terminal Arrangement/Internal
Connections (Top View)
4
3
4.5±0.1
1.5
5±0.2
2
4.1±0.1
3.5
dia.
1±0.05 dia.
7.5±0.1
3.4
Four,
1.2±0.05 dia.
1
5
3.5
0.3
0.7
7.5±0.5
9±0.5
0.7
0.3
0.7
Tactile Switch
B3F
225
Side-operated, Flat Plunger Type
Side-operated, Projected Plunger Type
B3F-3100, B3F-3102, B3F-3105
B3F-3150, B3F-3152, B3F-3155
PCB Mounting (Top View)
(Single-sided PCB, t=1.6)
7.3
PCB Mounting (Top View)
(Single-sided PCB, t=1.6)
7.3
Two, 1.5±0.05 dia.
6.25
Two, 1.5±0.05 dia.
6.25
2.5±0.1
2.5±0.1
4.5±0.1
3.5 dia.
3.5 dia.
4.5±0.1
7±0.1
Two,
1±0.05 dia.
Terminal Arrangement/
Internal Connections
(Top View)
4
3.5
4
0.7
0.3
0.3
2.25
7±0.5
8.7
3.15±0.2
2
Side-operated, Flat Plunger Type (Height: 3.85 mm)
B3F-3120, B3F-3122, B3F-3125
PCB Mounting (Top View)
(Single-sided PCB, t=1.6)
Two, 1.5±0.05 dia.
6.25
2.5±0.1
3.5 dia.
4.5±0.1
7±0.1
Two,
1±0.05 dia.
Terminal Arrangement/
Internal Connections
(Top View)
4
3.5
0.7
0.3
1
4.5±0.5
2.25
7±0.5
8.7
226
2.5±0.5
3.85±0.2
Tactile Switch
4
3
0.3
B3F
4
3
0.3
7±0.5
8.7
2.5±0.5
7.4
3.5
4.5±0.5
1
7.3
4
0.7
3
1
4.5±0.5
1
2
Two,
1±0.05 dia.
Terminal Arrangement/
Internal Connections
(Top View)
2.4 2.4±0.1
7.4
7.4
7±0.1
0.3
1.8±0.1
2.25
6.15±0.2
1
2.5±0.5
1
2
■ 12 x 12 mm Models
Standard, Long-life,
and High-reliability Models
Flat Plunger Type
(without Ground Terminal)
Standard, Long-life,
and High-reliability Models
Projected Plunger Type
(without Ground Terminal)
B3F-4000, B3F-4005,
B3F-5000, B3F-5001
B3F-4050, B3F-4055,
B3F-5050, B3F-5051
PCB Mounting (Top View)
(Single-sided PCB, t=1.6)
Two, 1.8±0.05 dia.
(for positioning boss)
12±0.2
5±0.1
9±0.1
5±0.2
12±0.2
12.5±0.1
7.1 dia.
4.3±0.2
3.5
3.5
0.3
1
12.5±0.5
4
3
2
1
Two, 1.8±0.05 dia.
(for positioning boss)
12±0.2
Four,
1.2±0.05 dia.
12.5±0.1
3.8 3.8±0.1
7.1 dia.
Terminal Arrangement/
Internal Connections
(Top View)
1.8±0.2
7.3±0.2
4.3±0.2
3.5
3.5
1
9±0.1
5±0.1 9±0.1
5±0.2
12±0.2
Four,
1.2±0.05 dia.
Terminal Arrangement/
Internal Connections
(Top View)
PCB Mounting (Top View)
(Single-sided PCB, t=1.6)
0.3
1
12.5±0.5
13.8±0.5
4
3
2
1
1
9±0.1
13.8±0.5
Standard, Long-life,
and High-reliability Models
Flat Plunger Type
(with Ground Terminal)
Standard, Long-life,
and High-reliability Models
Projected Plunger Type
(with Ground Terminal)
B3F-4100, B3F-4105,
B3F-5100, B3F-5101
B3F-4150, B3F-4155,
B3F-5150, B3F-5151
PCB Mounting (Top View)
(Single-sided PCB, t=1.6)
PCB Mounting (Top View)
(Single-sided PCB, t=1.6)
12±0.2
Two, 1.8±0.05 dia.
(for positioning boss)
Two, 1.8±0.05 dia.
(for positioning boss)
12±0.2
5±0.1
5±0.2
12±0.2
9±0.1
5±0.2
12±0.2
3.5
3.5
0.9
12.5±0.5
13.8±0.5
3.8 3.8±0.1
Terminal Arrangement/
Internal Connections
(Top View)
4
0.3
1
6.9
3
1
1
2
9±0.1
5
Five,
1.2±0.05 dia.
1.6
12.5±0.1
1.6
7.1 dia.
9±0.1
6.9±0.1
6.9±0.1
Five,
1.2±0.05 dia.
4.3±0.2
5±0.1
7.1 dia.
Terminal Arrangement/
Internal Connections
(Top View)
1.8±0.2
7.3±0.2
4.3±0.2
12.5±0.1
3.5
3.5
4
0.9
12.5±0.5
13.8±0.5
0.3
1
6.9
3
1
2
9±0.1
Tactile Switch
1
5
B3F
227
■ 6 x 6 mm Radial Taped Models: Sold in units of 1,000 switches
Note: Terminal numbers are not indicated on this switch. With the switch turned over so that the logo mark “OMRON” is visible on the upper part
of the rear side of the switch base, the terminal on the top of the logo mark is numbered “1” and that on the bottom is “2.”
Flat Plunger Type
(without Ground Terminal)
B3F-6000, B3F-6002
6±0.3
Surface B
6±0.3
12.7±1
6.35±1
2 max.
Surface A
3.5 dia.
0.5 max.
(1.1)
0.9
4.3
3.4
Support
tape
0.5 max.
6
0.2 max.
9
+1
180
9±0.5
0.5
+1
0.3
+0.8
5−0.2
18−0.5
4 dia. ±0.2
Note: The tape is random
between surface A
and surface B.
Terminal Arrangement
/Internal Connections
(Top View)
PCB Mounting
(Top View)
(Single-sided PCB, t=1.6)
Two, 1
Flat Plunger Type
(with Ground Terminal)
B3F-6100, B3F-6102
+0.1
0
dia.
2
5±0.1
12.7±0.3
Carrier tape
1
6±0.3
12.7±1
6.35±1
2 max.
2
6±0.3
3.5 dia.
Support
tape
0.5 max.
(1.1)
4.3
11
0.5 max.
20±0.5
0.9
3.4
6
9±0.5
3.1
+1
0.2 dia.
5±0.2
0.5
+0.8
5−0.2
PCB Mounting
(Top View)
(Single-sided PCB, t=1.6)
Three, 1
+0.1
0
dia.
18−0.5
0.3
0.6
4±0.2 dia.
12.7±0.3
Terminal Arrangement
/Internal Connections
(Top View)
2
5±0.1
Carrier tape
1
3
5±0.1
Flat Plunger Type
(without Ground Terminal)
B3F-6020, B3F-6022
6±0.3
Surface B
12.7±1
6.35±1
2 max.
6±0.3
3.5 dia.
Surface A
Support
tape
0.5 max.
(1.1)
5
0.5 max.
9
+1
180
0.9
3.4
6
9±0.5
+1
18−0.5
0.2 max.
0.5
0.3
+0.8
5−0.2
4±0.2 dia.
5±0.2
Note: The tape is random
between surface A
and surface B.
PCB Mounting
(Top View)
(Single-sided PCB, t=1.6)
Two, 1
228
Tactile Switch
+0.1
0
dia.
B3F
5±0.1
Terminal Arrangement
/Internal Connections
(Top View)
2
1
12.7±0.3
Carrier tape
Flat Plunger Type
(with Ground Terminal)
B3F-6120, B3F-6122
6±0.3
12.7±1
6.35±1
2
6±0.3
2 max.
3.5 dia.
0.5 max.
0.9
5
(1.1)
3.4
11
Support
tape
0.5 max.
20±0.5
3.1
6
0.2 max.
5±0.2
0.5
9±0.5
0.3
0.6
+0.8
5−0.2
+1
18−0.5
4±0.2 dia.
Terminal Arrangement
/Internal Connections
(Top View)
PCB Mounting
(Top View)
(Single-sided PCB, t=1.6)
+0.1
Three, 1
0
dia.
2
5±0.1
12.7±0.3
Carrier tape
1
3
5±0.1
Projected Plunger Type
(without Ground Terminal)
B3F-6050, B3F-6052
6±0.3
Surface B
6±0.3
3.5 dia.
Surface A
12.7±1
6.35±1
2.4
2 max.
0.5 max.
7.3
(1.1)
0.9
3.4
Support
tape
9
0.5 dia.
+1
180
0.2 max.
0.5
6
0.3
+0.8
5−0.2
9±0.5
+1
PCB Mounting
(Top View)
(Single-sided PCB, t=1.6)
18−0.5
Terminal Arrangement
/Internal Connections
(Top View)
4±0.2 dia.
12.7±0.3
+0.1
Two, 1
0
dia.
2
5±0.1
Carrier tape
1
Note: The tape is random between surface A
and surface B.
Projected Plunger Type
(with Ground Terminal)
B3F-6150, B3F-6152
6±0.3
12.7±1
6.35±1
2
6±0.3
2 max.
2.4
3.5 dia.
0.5 max.
7.3
(1.1)
0.9
11
Support
tape
3.4
0.5 max.
20±0.5
3.1
0.2 max.
0.5
5±0.2
PCB Mounting
(Top View)
(Single-sided PCB, t=1.6)
6
0.3
0.6
+0.8
5−0.2
+1
18−0.5
Terminal Arrangement
/Internal Connections
(Top View)
4±0.2 dia.
12.7±0.3
Three, 1
+0.1
0
dia.
2
5±0.1
5±0.1
9±0.5
Carrier tape
1
3
Tactile Switch
B3F
229
Hints on Correct Use
See the Tactile Switch User's Guide, "Tactile Switches - Technical Information" for information regarding processing and handling.
■ Taped Radial (Auto Insertion) Packaging
• Tactile switches packed on tape are placed into packing boxes as
shown below.
• Number of switches per box: 1,000
• Tape may be drawn from the box either from the top or from the bottom.
■ Taping Strength
The tactile switches will not release from the tape when pulled in
directions A and B at the following forces.
A: 500 g
B: 100 g
Precautions
Be sure to read the precautions common to all Tactile Switches, contained in the Technical User’s Guide, “Tactile Switches, Technical Information”
for correct use.
230
Tactile Switch
B3F
Omron Electronic Components, LLC
Terms and Conditions of Sales
I. GENERAL
1. Definitions: The words used herein are defined as follows.
(a) Terms:
These terms and conditions
(b) Seller:
Omron Electronic Components LLC and its subsidiaries
(c) Buyer:
The buyer of Products, including any end user in section III through VI
(d) Products: Products and/or services of Seller
(e) Including: Including without limitation
2. Offer; Acceptance: These Terms are deemed part of all quotations, acknowledgments,
invoices, purchase orders and other documents, whether electronic or in writing, relating
to the sale of Products by Seller. Seller hereby objects to any Terms proposed in Buyer's
purchase order or other documents which are inconsistent with, or in addition to, these
Terms.
3. Distributor: Any distributor shall inform its customer of the contents after and including
section III of these Terms.
II. SALES
1. Prices; Payment: All prices stated are current, subject to change without notice by Seller.
Buyer agrees to pay the price in effect at the time the purchase order is accepted by
Seller. Payments for Products received are due net 30 days unless otherwise stated in
the invoice. Buyer shall have no right to set off any amounts against the amount owing in
respect of this invoice.
2. Discounts: Cash discounts, if any, will apply only on the net amount of invoices sent to
Buyer after deducting transportation charges, taxes and duties, and will be allowed only
if (a) the invoice is paid according to Seller's payment terms and (b) Buyer has no past
due amounts owing to Seller.
3. Interest: Seller, at its option, may charge Buyer 1.5% interest per month or the maximum
legal rate, whichever is less, on any balance not paid within the stated terms.
4. Orders: Seller will accept no order less than 200 U.S. dollars net billing.
5. Currencies: If the prices quoted herein are in a currency other than U.S. dollars, Buyer
shall make remittance to Seller at the then current exchange rate most favorable to
Seller; provided that if remittance is not made when due, Buyer will convert the amount
to U.S. dollars at the then current exchange rate most favorable to Seller available
during the period between the due date and the date remittance is actually made.
6. Governmental Approvals: Buyer shall be responsible for all costs involved in obtaining
any government approvals regarding the importation or sale of the Products.
7. Taxes: All taxes, duties and other governmental charges (other than general real
property and income taxes), including any interest or penalties thereon, imposed directly
or indirectly on Seller or required to be collected directly or indirectly by Seller for the
manufacture, production, sale, delivery, importation, consumption or use of the Products
sold hereunder (including customs duties and sales, excise, use, turnover and license
taxes) shall be charged to and remitted by Buyer to Seller.
8. Financial: If the financial position of Buyer at any time becomes unsatisfactory to Seller,
Seller reserves the right to stop shipments or require satisfactory security or payment in
advance. If Buyer fails to make payment or otherwise comply with these Terms or any
related agreement, Seller may (without liability and in addition to other remedies) cancel
any unshipped portion of Products sold hereunder and stop any Products in transit until
Buyer pays all amounts, including amounts payable hereunder, whether or not then due,
which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid
accounts.
9. Cancellation; Etc: Orders are not subject to rescheduling or cancellation unless Buyer
indemnifies Seller fully against all costs or expenses arising in connection therewith.
10. Force Majeure: Seller shall not be liable for any delay or failure in delivery resulting from
causes beyond its control, including earthquakes, fires, floods, strikes or other labor
disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots,
delay in or lack of transportation or the requirements of any government authority.
11. Shipping; Delivery: Unless otherwise expressly agreed in writing by Seller:
(a) All sales and shipments of Products shall be FOB shipping point (unless otherwise
stated in writing by Seller), at which point title to and all risk of loss of the Products
shall pass from Seller to Buyer, provided that Seller shall retain a security interest in
the Products until the full purchase price is paid by Buyer;
(b) Delivery and shipping dates are estimates only; and
(c) Seller will package Products as it deems proper for protection against normal
handling and extra charges apply to special conditions.
12. Claims: Any claim by Buyer against Seller for shortage or damage to the Products
occurring before delivery to the carrier or any claim related to pricing or other charges
must be presented in detail in writing to Seller within 30 days of receipt of shipment.
III. PRECAUTIONS
1. Suitability: IT IS THE BUYER’S SOLE RESPOINSIBILITY TO ENSURE THAT ANY
OMRON PRODUCT IS FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE
APPLICATION. BUYER SHALL BE SOLELY RESPONSIBLE FOR DETERMINING
APPROPRIATENESS OF THE PARTICULAR PRODUCT WITH RESPECT TO THE
BUYER’S APPLICATION INCLUDING (A) ELECTRICAL OR ELECTRONIC
COMPONENTS, (B) CIRCUITS, (C) SYSTEM ASSEMBLIES, (D) END PRODUCT, (E)
SYSTEM, (F) MATERIALS OR SUBSTANCES OR (G) OPERATING ENVIRONMENT.
Buyer acknowledges that it alone has determined that the Products will meet their
requirements of the intended use in all cases. Buyer must know and observe all
prohibitions of use applicable to the Product/s.
2. Use with Attention: The followings are some examples of applications for which
particular attention must be given. This is not intended to be an exhaustive list of all
possible use of any Product, nor to imply that any use listed may be suitable for any
Product:
(a) Outdoor use, use involving potential chemical contamination or electrical
interference.
(b) Use in consumer Products or any use in significant quantities.
(c) Energy control systems, combustion systems, railroad systems, aviation systems,
medical equipment, amusement machines, vehicles, safety equipment, and
installations subject to separate industry or government regulations.
(d) Systems, machines, and equipment that could present a risk to life or property.
3. Prohibited Use: NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING
SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE
PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE
WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
4. Motorized Vehicle Application: USE OF ANY PRODUCT/S FOR A MOTORIZED
VEHICLE APPLICATION MUST BE EXPRESSLY STATED IN THE SPECIFICATION BY
SELLER.
5. Programmable Products: Seller shall not be responsible for the Buyer's programming of
a programmable Product.
IV. WARRANTY AND LIMITATION
1. Warranty: Seller's exclusive warranty is that the Products will be free from defects in
materials and workmanship for a period of twelve months from the date of sale by Seller
(or such other period expressed in writing by Seller). SELLER MAKES NO WARRANTY
OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT ALL OTHER WARRANTIES,
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE OF THE PRODUCTS.
2. Buyer Remedy: Seller's sole obligation hereunder shall be to replace (in the form
originally shipped with Buyer responsible for labor charges for removal or replacement
thereof) the non-complying Product or, at Seller's election, to repay or credit Buyer an
amount equal to the purchase price of the Product; provided that there shall be no
liability for Seller or its affiliates unless Seller's analysis confirms that the Products were
correctly handled, stored, installed and maintained and not subject to contamination,
abuse, misuse or inappropriate modification. Return of any Products by Buyer must be
approved in writing by Seller before shipment.
3. Limitation on Liability: SELLER AND ITS AFFILIATES SHALL NOT BE LIABLE FOR
SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF
PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED
WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT,
WARRANTY, NEGLIGENCE OR STRICT LIABILITY. FURTHER, IN NO EVENT SHALL
LIABILITY OF SELLER OR ITS AFFILITATES EXCEED THE INDIVIDUAL PRICE OF
THE PRODUCT ON WHICH LIABILITY IS ASSERTED.
4. Indemnities: Buyer shall indemnify and hold harmless Seller, its affiliates and its
employees from and against all liabilities, losses, claims, costs and expenses (including
attorney's fees and expenses) related to any claim, investigation, litigation or proceeding
(whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or
omissions under these Terms or in any way with respect to the Products.
V. INFORMATION; ETC.
1. Intellectual Property: The intellectual property embodied in the Products is the exclusive
property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way
without the written permission of Seller. Buyer (at its own expense) shall indemnify and
hold harmless Seller and defend or settle any action brought against Seller to the extent
that it is based on a claim that any Product made to Buyer specifications infringed
intellectual property rights of another party.
2. Property; Confidentiality: Notwithstanding any charges to Buyer for engineering or
tooling, all engineering and tooling shall remain the exclusive property of Seller. All
information and materials supplied by Seller to Buyer relating to the Products are
confidential and proprietary, and Buyer shall limit distribution thereof to its trusted
employees and strictly prevent disclosure to any third party.
3. Performance Data: Performance data is provided as a guide in determining suitability
and does not constitute a warranty. It may represent the result of Seller's test conditions,
and the users must correlate it to actual application requirements.
4. Change In Specifications: Product specifications and descriptions may be changed at
any time based on improvements or other reasons. It is Seller’s practice to change part
numbers when published ratings or features are changed, or when significant
engineering changes are made. However, some specifications of the Product may be
changed without any notice.
5. Errors And Omissions: The information on Seller’s website or in other documentation
has been carefully checked and is believed to be accurate; however, no responsibility is
assumed for clerical, typographical or proofreading errors or omissions.
6. Export Controls: Buyer shall comply with all applicable laws, regulations and licenses
regarding (a) export of the Products or information provided by Seller; (b) sale of
Products to forbidden or other proscribed persons or organizations; (c) disclosure to noncitizens of regulated technology or information.
VI. MISCELLANEOUS
1. Waiver: No failure or delay by Seller in exercising any right and no course of dealing
between Buyer and Seller shall operate as a waiver of rights by Seller.
2. Assignment: Buyer may not assign its rights hereunder without Seller's written consent.
3. Law: These Terms are governed by Illinois law (without regard to conflict of laws).
Federal and state courts in Cook County, Illinois have exclusive jurisdiction for any
dispute hereunder.
4. Amendment: These Terms constitute the entire agreement between Buyer and Seller
relating to the Products, and no provision may be changed or waived unless in writing
signed by the parties.
5. Severability: If any provision hereof is rendered ineffective or invalid, such provision shall
not invalidate any other provision.
Tactile Switch
B3F
Certain Precautions on Specifications and Use
1. Suitability for Use. Seller shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in
Buyer's application or use of the Product. At Buyer's request, Seller will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not
sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use.
Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer's application, product or system. Buyer
shall take application responsibility in all cases but the following is a nonexhaustive list of applications for which particular attention must be given:
(i) Outdoor use, uses involving potential chemical contamination or electrical
interference, or conditions or uses not described in this document.
(ii) Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety
equipment, and installations subject to separate industry or government
regulations.
(iii) Use in consumer products or any use in significant quantities.
(iv) Systems, machines and equipment that could present a risk to life or
property. Please know and observe all prohibitions of use applicable to this
product.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT
THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE
INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
2. Programmable Products. Seller shall not be responsible for the user's programming of a programmable product, or any consequence thereof.
3. Performance Data. Performance data given in this publication is provided as
a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Seller's test conditions, and the users must
correlate it to actual application requirements. Actual performance is subject to
Seller's Warranty and Limitations of Liability.
4. Change in Specifications. Product specifications and accessories may be
changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed,
or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for
your application. Please consult with your Seller representative at any time to
confirm actual specifications of purchased Product.
5. Errors and Omissions. The information in this publication has been carefully
checked and is believed to be accurate; however, no responsibility is assumed
for clerical, typographical or proofreading errors, or omissions.
6. RoHS Compliance. Where indicated, our products currently comply, to the
best of our knowledge as of the date of this publication, with the requirements
of the European Union's Directive on the Restriction of certain Hazardous
Substances ("RoHS"), although the requirements of RoHS do not take effect
until July 2006. These requirements may be subject to change. Please consult
our website for current information.
Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website
at http://www.components.omron.com – under the “About Us” tab, in the Legal Matters section.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ON-LINE
OMRON ELECTRONIC
COMPONENTS LLC
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
Global - http://www.omron.com
USA - http://www.components.omron.com
847-882-2288
Cat. No. X303-E-1
Tactile Switch
11/09
B3F
Specifications subject to change without notice
Printed in USA
Similar pages