CLD-DS49 Rev 3F Product family data sheet Cree® XLamp® MT-G2 EasyWhite® LEDs Product Description FEATURES Table of contents The XLamp® MT-G2 EasyWhite® LED • Cree EasyWhite color temperatures Characteristics............................................2 from 2700 K to 5000 K CCT Flux Characteristics, Standard Order builds on the breakthrough performance of the original MT-G by increasing lumen • 85 °C binning and characterization Codes, Bins, 6-Volt MT-G2..........................3 output up to 25%, while providing a small, • Three voltage options: 6 V, 9 V, 36 V Flux Characteristics, Standard Order uniform, single point source for precise • 80 and 90 minimum CRI options Codes, Bins, 9-Volt MT-G2..........................4 optical control. The MT-G2 shares the • Low effective thermal resistance: Flux Characteristics, Standard Order 1.5 °C/W Codes, Bins, 36-Volt MT-G2........................5 same mechanical footprint as the original MT-G, providing customers with • High lumen density Relative Spectral Power Distribution.........6 a seamless upgrade path and shortening • Small, uniform emitting area for Relative Luminous Flux vs. Junction excellent optical control Temperature................................................6 • Electrically neutral thermal path Electrical Characteristics............................7 • RoHS and REACh compliant Relative Luminous Flux vs. Current............8 • UL® recognized component Typical Spatial Distribution.......................10 (E349212) Performance Groups – Brightness..........10 the LED luminaire and retrofit lamp design cycle. MT-G2 LEDs are designed for highoutput, directional lighting applications and are the ideal replacement for lighting applications that currently use inefficient halogen lamps. MT-G2 LEDs are optimized for use in track, accent, lamp retrofit, downlighting and other applications where color quality, consistency and optical control are www.cree.com/Xlamp required. Performance Groups – Chromaticity.......11 Applications Cree EasyWhite® Color Temperatures • Plotted on the 1931 CIE Curve.................12 MR, PAR, BR, AR and other directional retrofit lamps • Commercial/residential directional lighting • General illumination Bin and Order Code Formats....................13 Reflow Soldering Characteristics.............14 Notes.........................................................15 Mechanical Dimensions...........................17 Tape and Reel............................................18 Packaging..................................................19 Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 XLamp ® MT-G2 EasyWhite ® LED Characteristics Characteristics Viewing angle (FWHM) ESD withstand voltage (HBM per Mil-Std-883D) Effective thermal resistance, junction to solder point Unit degrees Minimum Typical 115 V °C/W Maximum 8000 1.5 LED junction temperature °C 150 DC forward current (6 V) mA 3000 DC forward current (9 V) mA 2000 DC forward current (36 V) mA 500 Forward voltage (6 V, 1100 mA, 85 °C) V Forward voltage (6 V, 1100 mA, 25 °C) V Forward voltage (9 V, 735 mA, 85 °C) V Forward voltage (9 V, 735 mA, 25 °C) V Forward voltage (36 V, 185 mA, 85 °C) V Forward voltage (36 V, 185 mA, 25 °C) 5.7 7 8.55 10.5 34.2 V 42 Temperature coefficient of voltage (6 V) mV/°C -4 Temperature coefficient of voltage (9 V) mV/°C -6 Temperature coefficient of voltage (36 V) mV/°C -26 Reverse voltage (6 V) V -5 Reverse current (6 V, 9 V, 36 V) A 0.1 Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 2 XLamp ® MT-G2 EasyWhite ® LED Flux Characteristics, Standard Order Codes, Bins, 6-Volt MT-G2 (1100 mA, Tj = 85 °C) The following table provides several base order codes for 6-volt XLamp MT-G2 EasyWhite LEDs. For a complete description of the ordercode nomenclature, please reference page 13 of this document. Color CCT Range 5000 K 4000 K Standard CRI EasyWhite 3500 K 3000 K 2700 K 5000 K 80 CRI EasyWhite 4000 K 3000 K 90 CRI EasyWhite 2700 K Minimum Luminous Flux (lm) @ 1100 mA Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* N0 750 863 P0 800 920 2-Step Chromaticity Region 50H 4-Step Order Code MTGBEZ-00-0000-0B00N050H MTGBEZ-00-0000-0B00P050H Chromaticity Region 50F MTGBEZ-00-0000-0B00N050F MTGBEZ-00-0000-0B00P050F K0 650 748 M0 700 805 N0 750 863 MTGBEZ-00-0000-0B00N040H MTGBEZ-00-0000-0B00N040F K0 650 748 MTGBEZ-00-0000-0B00K035H MTGBEZ-00-0000-0B00K035F M0 700 805 N0 750 863 MTGBEZ-00-0000-0B00N035H MTGBEZ-00-0000-0B00N035F J0 600 690 MTGBEZ-00-0000-0B00J030H MTGBEZ-00-0000-0B00J030F K0 650 748 M0 700 805 MTGBEZ-00-0000-0B00M030H MTGBEZ-00-0000-0B00M030F H0 560 644 MTGBEZ-00-0000-0B00H027H MTGBEZ-00-0000-0B00H027F J0 600 690 K0 650 748 M0 700 805 N0 750 863 J0 600 690 K0 650 748 M0 700 805 F0 480 552 G0 520 598 E0 440 506 F0 480 552 MTGBEZ-00-0000-0B00K040H Order Code 40H 35H 30H 27H MTGBEZ-00-0000-0B00M040H MTGBEZ-00-0000-0B00M035H MTGBEZ-00-0000-0B00K030H MTGBEZ-00-0000-0B00J027H MTGBEZ-00-0000-0B00K040F 40f 35F 30F 27F MTGBEZ-00-0000-0B00K027H 50H MTGBEZ-00-0000-0B0HM050H MTGBEZ-00-0000-0B0HN050H MTGBEZ-00-0000-0B0HK040H 50F 27H MTGBEZ-00-0000-0B0UF030H MTGBEZ-00-0000-0B0UG030H MTGBEZ-00-0000-0B0UE027H MTGBEZ-00-0000-0B0UF027H MTGBEZ-00-0000-0B00K030F MTGBEZ-00-0000-0B00J027F MTGBEZ-00-0000-0B0HM050F MTGBEZ-00-0000-0B0HN050F MTGBEZ-00-0000-0B0HJ040F 40F MTGBEZ-00-0000-0B0HM040H 30H MTGBEZ-00-0000-0B00M035F MTGBEZ-00-0000-0B00K027F MTGBEZ-00-0000-0B0HJ040H 40H MTGBEZ-00-0000-0B00M040F MTGBEZ-00-0000-0B0HK040F MTGBEZ-00-0000-0B0HM040F 30F 27F MTGBEZ-00-0000-0B0UF030F MTGBEZ-00-0000-0B0UG030F MTGBEZ-00-0000-0B0UE027F MTGBEZ-00-0000-0B0UF027F Notes: • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 15). • Cree XLamp MT-G2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. • Minimum CRI for standard EasyWhite color temperatures 27F, 27H, 30F, 30H, 35F, 35H is 80. • Minimum CRI for standard EasyWhite color temperatures, 40F, 40H, 50F, 50H is 70. • Typical CRI for standard EasyWhite color temperatures 40F, 40H, 50F, 50H is 75. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 3 XLamp ® MT-G2 EasyWhite ® LED Flux Characteristics, Standard Order Codes, Bins, 9-Volt MT-G2 (735 mA, Tj = 85 °C) The following table provides several base order codes for 9-volt XLamp MT-G2 EasyWhite LEDs. For a complete description of the ordercode nomenclature, please reference page 13 of this document. Color CCT Range 5000 K 4000 K Standard CRI EasyWhite 3500 K 3000 K 2700 K 5000 K 80 CRI EasyWhite 4000 K 3000 K 90 CRI EasyWhite 2700 K Minimum Luminous Flux (lm) @ 735 mA Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* N0 750 863 P0 800 920 2-Step Chromaticity Region 50H 4-Step Order Code MTGBEZ-00-0000-0C00N050H MTGBEZ-00-0000-0C00P050H Chromaticity Region 50F MTGBEZ-00-0000-0C00N050F MTGBEZ-00-0000-0C00P050F K0 650 748 M0 700 805 N0 750 863 MTGBEZ-00-0000-0C00N040H MTGBEZ-00-0000-0C00N040F K0 650 748 MTGBEZ-00-0000-0C00K035H MTGBEZ-00-0000-0C00K035F M0 700 805 N0 750 863 MTGBEZ-00-0000-0C00N035H MTGBEZ-00-0000-0C00N035F J0 600 690 MTGBEZ-00-0000-0C00J030H MTGBEZ-00-0000-0C00J030F K0 650 748 M0 700 805 MTGBEZ-00-0000-0C00M030H MTGBEZ-00-0000-0C00M030F H0 560 644 MTGBEZ-00-0000-0C00H027H MTGBEZ-00-0000-0C00H027F J0 600 690 K0 650 748 M0 700 805 N0 750 863 J0 600 690 K0 650 748 M0 700 805 F0 480 552 G0 520 598 E0 440 506 F0 480 552 MTGBEZ-00-0000-0C00K040H Order Code 40H 35H 30H 27H MTGBEZ-00-0000-0C00M040H MTGBEZ-00-0000-0C00M035H MTGBEZ-00-0000-0C00K030H MTGBEZ-00-0000-0C00J027H MTGBEZ-00-0000-0C00K040F 40F 35F 30F 27F MTGBEZ-00-0000-0C00K027H 50H MTGBEZ-00-0000-0C0HM050H MTGBEZ-00-0000-0C0HN050H MTGBEZ-00-0000-0C0HK040H 50F 27H MTGBEZ-00-0000-0C0UF030H MTGBEZ-00-0000-0C0UG030H MTGBEZ-00-0000-0C0UE027H MTGBEZ-00-0000-0C0UF027H MTGBEZ-00-0000-0C00K030F MTGBEZ-00-0000-0C00J027F MTGBEZ-00-0000-0C0HM050F MTGBEZ-00-0000-0C0HN050F MTGBEZ-00-0000-0C0HJ040F 40F MTGBEZ-00-0000-0C0HM040H 30H MTGBEZ-00-0000-0C00M035F MTGBEZ-00-0000-0C00K027F MTGBEZ-00-0000-0C0HJ040H 40H MTGBEZ-00-0000-0C00M040F MTGBEZ-00-0000-0C0HK040F MTGBEZ-00-0000-0C0HM040F 30F 27F MTGBEZ-00-0000-0C0UF030F MTGBEZ-00-0000-0C0UG030F MTGBEZ-00-0000-0C0UE027F MTGBEZ-00-0000-0C0UF027F Notes: • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 15). • Cree XLamp MT-G2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. • Minimum CRI for standard EasyWhite color temperatures 27F, 27H, 30F, 30H, 35F, 35H is 80. • Minimum CRI for standard EasyWhite color temperatures, 40F, 40H, 50F, 50H is 70. • Typical CRI for standard EasyWhite color temperatures 40F, 40H, 50F, 50H is 75. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 4 XLamp ® MT-G2 EasyWhite ® LED Flux Characteristics, Standard Order Codes, Bins, 36-Volt MT-G2 (185 mA, Tj = 85 °C) The following table provides several base order codes for 36-volt XLamp MT-G2 EasyWhite LEDs. For a complete description of the ordercode nomenclature, please reference page 13 of this document. Color CCT Range 5000 K 4000 K Standard CRI EasyWhite 3500 K 3000 K 2700 K 5000 K 80 CRI EasyWhite 4000 K 3000 K 90 CRI EasyWhite 2700 K Minimum Luminous Flux (lm) @ 185 mA Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* N0 750 863 P0 800 920 2-Step Chromaticity Region 50H 4-Step Order Code MTGBEZ-00-0000-0N00N050H MTGBEZ-00-0000-0N00P050H Chromaticity Region 50F MTGBEZ-00-0000-0N00N050F MTGBEZ-00-0000-0N00P050F K0 650 748 M0 700 805 N0 750 863 MTGBEZ-00-0000-0N00N040H MTGBEZ-00-0000-0N00N040F K0 650 748 MTGBEZ-00-0000-0N00K035H MTGBEZ-00-0000-0N00K035F M0 700 805 N0 750 863 MTGBEZ-00-0000-0N00N035H MTGBEZ-00-0000-0N00N035F J0 600 690 MTGBEZ-00-0000-0N00J030H MTGBEZ-00-0000-0N00J030F K0 650 748 M0 700 805 MTGBEZ-00-0000-0N00M030H MTGBEZ-00-0000-0N00M030F H0 560 644 MTGBEZ-00-0000-0N00H027H MTGBEZ-00-0000-0N00H027F J0 600 690 K0 650 748 M0 700 805 N0 750 863 J0 600 690 K0 650 748 M0 700 805 F0 480 552 G0 520 598 E0 440 506 F0 480 552 MTGBEZ-00-0000-0N00K040H Order Code 40H 35H 30H 27H MTGBEZ-00-0000-0N00M040H MTGBEZ-00-0000-0N00M035H MTGBEZ-00-0000-0N00K030H MTGBEZ-00-0000-0N00J027H MTGBEZ-00-0000-0N00K040F 40F 35F 30F 27F MTGBEZ-00-0000-0N00K027H 50H MTGBEZ-00-0000-0N0HM050H MTGBEZ-00-0000-0N0HN050H MTGBEZ-00-0000-0N0HK040H 50F 27H MTGBEZ-00-0000-0N0UF030H MTGBEZ-00-0000-0N0UG030H MTGBEZ-00-0000-0N0UE027H MTGBEZ-00-0000-0N0UF027H MTGBEZ-00-0000-0N00K030F MTGBEZ-00-0000-0N00J027F MTGBEZ-00-0000-0N0HM050F MTGBEZ-00-0000-0N0HN050F MTGBEZ-00-0000-0N0HJ040F 40F MTGBEZ-00-0000-0N0HM040H 30H MTGBEZ-00-0000-0N00M035F MTGBEZ-00-0000-0N00K027F MTGBEZ-00-0000-0N0HJ040H 40H MTGBEZ-00-0000-0N00M040F MTGBEZ-00-0000-0N0HK040F MTGBEZ-00-0000-0N0HM040F 30F 27F MTGBEZ-00-0000-0N0UF030F MTGBEZ-00-0000-0N0UG030F MTGBEZ-00-0000-0N0UE027F MTGBEZ-00-0000-0N0UF027F Notes: • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 15). • Cree XLamp MT-G2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. • Minimum CRI for standard EasyWhite color temperatures 27F, 27H, 30F, 30H, 35F, 35H is 80. • Minimum CRI for standard EasyWhite color temperatures, 40F, 40H, 50F, 50H is 70. • Typical CRI for standard EasyWhite color temperatures 40F, 40H, 50F, 50H is 75. * Flux values @ 25 °C are calculated and for reference only. Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 5 XLamp ® MT-G2 EasyWhite ® LED Relative Spectral Power Distribution White The following graph represents typical spectral output of each die of the MT-G Gen II Relative Spectral Power Distribution (6 V, 1100 mA; 9 V, 735 mA; 36 V, 185 mA; TJ = 85 °C) Cool white to be added The following graph represents typical spectral output of the XLamp MT-G2 EasyWhite LED. 100% 90% Relative Spectral Power (%) 80% 70% 60% Warm White Neutral White 50% 40% 30% 20% 10% 0% 380 430 480 530 580 630 680 730 780 Wavelength (nm) Relative Flux Output vs. Junction Temperature (If = 1100 mA, or 183.33 if @ 36V) The following graph represents typical performance of each LED die in the XLamp MT-G Gen II Relative Luminous Flux vs. Junction Temperature (6 V, 1100 ma; 9 V, 735 mA; 36 V, 185 mA) The following graph represents typical performance of the XLamp MT-G2 EasyWhite LED. 120% Relative Luminous Flux 100% 80% 60% 40% 20% 0% 25 50 75 100 125 150 Junction Temperature (ºC) Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 6 XLamp ® MT-G2 EasyWhite ® LED Electrical Characteristics (Tsp = 85ºC) 6V Electrical Characteristics (TJ = 85 °C) 3000 2500 Current (mA) 2000 MT-G2 6V 1500 1000 500 0 5.00 5.25 5.50 5.75 6.00 6.25 Forward Voltage V Electrical Characteristics (Tsp = 85ºC) 9V 2000 Current (mA) 1600 1200 MT-G2 9V 800 400 0 7.75 8.00 8.25 8.50 8.75 9.00 9.25 Forward Voltage V Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 7 XLamp ® MT-G2 EasyWhite ® LED Electrical Characteristics (Tsp = 85ºC) 36V Electrical Characteristics (TJ = 85 °C) - Continued 500 450 400 Current (mA) 350 300 250 MT-G2 36V 200 150 100 50 0 31 32 33 34 35 36 37 Forward Voltage V Relative Intensity vs. Current (Tsp = 85ºC) - 6 V Relative Luminous Flux vs. Current (TJ = 85 °C) Relative Luminous Flux (%) 250% 200% 150% MT-G2 6V 100% 50% 0% 0 500 1000 1500 2000 2500 3000 Forward Current, Pulsed (mA) Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 8 XLamp ® MT-G2 EasyWhite ® LED Relative Intensity vs. Current (Tsp = 85ºC) 9 V Relative Luminous Flux vs. Current (TJ = 85 °C) - Continued Relative Luminous Flux (%) 250% 200% 150% MT-G2 9V 100% 50% 0% Relative Intensity vs. Current (Tsp = 85ºC) 36 V 0 400 800 1200 1600 2000 Forward Current, Pulsed (mA) Relative Luminous Flux (%) 250% 200% 150% MT-G2 36V 100% 50% 0% 0 50 100 150 200 250 300 350 400 450 500 Forward Current, Pulsed (mA) Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 9 XLamp ® MT-G2 EasyWhite ® LED Spatial Distribution MT-G2 Typical Spatial Distribution The following graph represents typical performance of the XLamp MT-G2 EasyWhite LED. 100 Relative Luminous Intensity (%) 80 60 40 20 -90 -60 0 -30 0 30 60 90 Angle (º) Performance Groups – Brightness (TJ = 85 °C) XLamp MT-G2 EasyWhite LEDs are tested for luminosity and placed into one of the following bins. Group Code Minimum Luminous Flux @ Nominal IF Maximum Luminous Flux @ Nominal IF D0 400 440 E0 440 480 F0 480 520 G0 520 560 H0 560 600 J0 600 650 K0 650 700 M0 700 750 N0 750 800 P0 800 860 Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 10 XLamp ® MT-G2 EasyWhite ® LED Performance Groups – Chromaticity (TJ = 85 °C) XLamp MT-G2 EasyWhite LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates. EasyWhite Color Temperatures – 2-Step EasyWhite Color Temperatures – 4-Step Code 50F 40F 35F 30F 27F CCT 5000 K 4000 K 3500 K 3000 K 2700 K x y 0.3429 0.3507 0.3434 0.3571 0.3475 0.3604 0.3469 0.3539 0.3685 0.3784 0.3741 0.3837 0.3804 0.3818 0.3867 0.3857 0.3758 0.3844 0.3778 0.3800 0.4030 0.3857 0.4040 0.3966 0.4061 0.3941 0.4186 0.4037 0.4132 0.3976 0.4116 0.3865 0.4099 0.3890 0.4242 0.3919 0.4291 0.3973 0.4322 0.4096 0.4333 0.4062 0.4449 0.4141 0.4395 0.4084 0.4359 0.3960 0.4351 0.3994 0.4475 0.3994 0.4528 0.4046 0.4573 0.4178 0.4578 0.4138 0.4695 0.4207 0.4638 0.4152 0.4589 0.4021 0.4586 0.4060 x y 0.3407 0.3459 0.3415 0.3586 0.3499 0.3654 0.3484 0.3521 0.3744 0.3782 0.3912 0.3917 0.3863 0.3981 Code 50H 40H 35H 30H 27H CCT 5000 K 4000 K 3500 K 3000 K 2700 K Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 11 XLamp ® MT-G2 EasyWhite ® LED Cree EasyWhite® Color Temperatures Plotted on the 1931 CIE Curve (TJ = 85 °C) 0.45 ANSI C78.377 Quadrangle EasyWhite 4-step EasyWhite 2-step 0.44 2700 K 3000 K 0.43 3500 K 0.42 4000 K 4500 K 0.41 CCy 0.40 5000 K 0.39 5700 K 0.38 0.37 0.36 0.35 0.34 0.33 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.32 CCx Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 12 XLamp ® MT-G2 EasyWhite ® LED Bin and Order Code Formats Bin codes and order codes are configured as follows: Order Code Bin Code Series MTG = MT-G Series MTG = MT-G Internal code Internal code CRI Specification H = 80 min CRI (4000 K & 5000 K) U = 90 min CRI (2700 K & 3000 K) 0 = Standard CRI Flux bin CRI Specification B = 70 min CRI H = 80 min CRI U = 90 min CRI SSSCCC-BZ-HHHH-HVVRNNNNN Kit code Vf class B0 = 6-V class C0 = 9-V class N0 = 36-V class Reel size 0 = 500 (standard) 1 = 100 (non-standard) Color BEZ = EasyWhite SSSCCC-BB-WWW-FF-VVRAAAA Internal Code Vf class: B0 = 6-V class C0 = 9-V class N0 = 36-V class Chromaticity bin Color BEZ = EasyWhite Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 13 XLamp ® MT-G2 EasyWhite ® LED Reflow Soldering Characteristics In testing, Cree has found XLamp MT-G2 EasyWhite LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. tP TP Critical Zone TL to TP Temperature Ramp-up TL tS Tsmax Tsmin Ramp-down ts Preheat 25 t 25˚C to Peak Profile Feature Average Ramp-Up Rate (Tsmax to Tp) IPC/JEDEC J-STD-020C Time Lead-Free Solder 1.2 °C/second Preheat: Temperature Min (Tsmin) 120 °C Preheat: Temperature Max (Tsmax) 170 °C Preheat: Time (tsmin to tsmax) 65-150 seconds Time Maintained Above: Temperature (TL) Time Maintained Above: Time (tL) 217 °C 45-90 seconds Peak/Classification Temperature (Tp) 235 - 245 °C Time Within 5 °C of Actual Peak Temperature (tp) 20-40 seconds Ramp-Down Rate 1 - 6 °C/second Time 25 °C to Peak Temperature 4 minutes max. Note: All temperatures refer to the topside of the package, measured on the package body surface. Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 14 XLamp ® MT-G2 EasyWhite ® LED Notes Measurements The luminous flux, radiant power, chromaticity and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree’s control and are not intended or provided as operational specifications for the products. Calculated values are provided for informational purposes only and are not intended as specifications. Pre‑Release Qualification Testing Please read the LED Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp LEDs and details of Cree’s pre-release qualification testing for XLamp LEDs. Lumen Maintenance Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document. Moisture Sensitivity Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering. Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity. Once the MBP is opened, XLamp MT-G2 EasyWhite LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of storage condition, Cree recommends sealing any unsoldered LEDs in the original MBP. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Documentation sections of www.cree.com. REACh Compliance REACh substances of high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to insure you get the most up-to-date REACh Declaration. REACh banned substance information (REACh Article 67) is also available upon request. UL® Recognized Component Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/ UL 8750. Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 15 XLamp ® MT-G2 EasyWhite ® LED Notes - Continued Vision Advisory WARNING. Do not look at exposed LED lamps in operation. Eye injury can result. For more information about LEDs and eye safety, please refer to the LED Eye Safety application note. Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 16 XLamp ® MT-G2 EasyWhite ® LED 6 5 6 5 NOTICE NOTICE 1 CREE CONFIDENTIAL. THIS PLOT THE INFORMATION CREE CONFIDENTIAL. THIS PLOT AND THEAND INFORMATION CONTAINED WITHIN THE PROPRIETARY AND REVISONS CONTAINED WITHIN ARE THEARE PROPRIETARY AND CONFIDENTIAL INFORMATION CREE, INC. THIS PLOT CONFIDENTIAL INFORMATION OF CREE,OF INC. THIS PLOT BYCOPIED, DATE APP'D DESCRIPTION MAY NOT BE REPRODUCED OR DISCLOSED MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY TO ANY UNAUTHORIZED PERSON THE WITHOUT WRITTEN CONSENT UNAUTHORIZED PERSON THE WITHOUT WRITTEN CONSENT DC INITIAL RELEASE 5/14/12 OF CREE INC. OF CREE INC. DC 8/19/15 ADDED ALTERNATE VIEW/UPDATED STENCIL 4 4 3 3 REV A B REV Mechanical Dimensions A B 2 2 2 REV DESCRIP A I INITIAL REL B ADDED ALT ADDED ALTERNATE VI Thermal vias, if present, are not shown on these drawings. All measurements are ±.13 mm unless otherwise indicated. D D C .95 9.11 D 9.11 8.90 6.00 9.11 9.11 .50 9.11 C C 8.90 8.90 8.90 Anode .30 R4.10 R4.10 Anode 8.90 .25 .25 1.35 1.35 Bottom View REF. .95 .95 4 B 4 8.90 REF. 1.35 .95 1.23 COMMENDED STENCIL PATTERN ATCHED AREA IS OPENING) 4 8.90 .58 .58 .25 .25 1.35 .58 DATE DRAWN BY .95 1.35 UNLESS OTHERWISE SPECIFIED .95D. CRONIN 5/14/12 4600 Silicon Drive .25 DIMENSIONS ARE IN Durham, N.C 277031.23 CHECK MILLIMETERS AND AFTER FINISH. DATE Phone (919) 313-5300 1.23 TOLERANCE UNLESS SPECIFIED: 1.35 Fax (919) 313-5558 .95 .XX ± .25 DATE APPROVED A RECOMMENDED PC BOARD SOLDER PAD TITLE .XXX±PC .125 RECOMMENDED STENCIL PATTERN RECOMMENDED BOARD SOLDER PAD 1.23 Recommended RECOMMENDED STENCIL PATTERN X° ± .5°PCB Solder Pad Recommended Stencil Pattern (HATCHED AREA IS OPENING) MT-G2 OUTLINE MATERIAL FOR SHEET METAL PARTS ONLY (HATCHED AREA IS OPENING) .X ± SOLDER 1.5 PAD (Shaded Area Is Open) RECOMMENDED PC BOARD REV. RECOMMENDED STENCIL PATTERN DRAWING NO. SIZE .XX ± .75 6 ± .25 5 4 .XXX FINAL PROTECTIVE FINISH 2610-00025 (HATCHED AREA IS OPENING) C5 4 B X°6 ± .5° SCALE SHEET OF 1/1 1.6 SURFACE FINISH: 9.000 6 2 5 .25 .30 .30 ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED 3 2 2 8.90 8.90 .95 .95 A .25 1.35 A A 3 .25 .25 3 .30 .58 ± 1.5 .X ± 1.5.X SIZ .XX ± .75.XX ± .75 ±FINAL .25 PROTECTIVE FINAL PROT .XXX± .25.XXX FIN X° ± .5° X° ± .5° SC 1.6 1.6 SURFACE FINISH: SURFACE FINISH: 1.35 1.35 .25 8.90 .95 .95 .50 .50 .95 6.00 ALL DIMENSIONS ARE UNLESS ± .13MM UNLES 6.00 ALL DIMENSIONS ARE ± .13MM OTHERW .58 .58 .50 DRAWN BD DATE DRAWN BY PRIMARY UNLESS OTHERWISE SPECIFIED 6.00 UNLESS OTHERWISE SPECIFIED PRIMARY CRONIN 5/14/12 DIMENSIONS ARE IND. DIMENSIONS ARE IND. CRONIN CHECK MILLIMETERS AND AFTER FINISH. D CHECK DATE MILLIMETERS AND AFTER FINISH. AlternatePRIMARY Bottom View TOLERANCE UNLESS SPECIFIED: TOLERANCE UNLESS SPECIFIED: .25 D APPROVE .XX ± .25.XX ± APPROVED DATE .XXX± .125 TIT .XXX± .125 X° ± .5° X° ± .5° MATERIA MATERIAL FOR SHEET METAL PARTS ONLY FOR SHEET METAL PARTS ONLY 1.23 8.90 8.90 RECOMMENDED STENCIL PATTERN RECOMMENDED STENCIL .95 PATTERN .95 .95 AREA IS OPENING) 8.90 .95 (HATCHED(HATCHED AREA IS OPENING) 1.23 6.00 1 8.90 8.90 8.90 C R4.10 ALTERNATIVE DATE DRAWN BY UNLESS OTHERWISE SPECIFIED Alternate Bottom View 4600 Silicon Drive DIMENSIONS ARE IND. CRONIN 5/14/12 .95 .95 PRIMARY Durham, .95 N.C 27703 CHECK MILLIMETERS AND AFTER FINISH. DATE.95 Phone (919) 313-5300 TOLERANCE UNLESS SPECIFIED: Fax (919) 313-5558 .XX ± .25 DATE APPROVED 8.90 TITLE .XXX± .125 8.90A X° ± .5° RECOMMENDED BOARD SOLDER PAD RECOMMENDED PC BOARDPC SOLDER PAD MT-G2 .50OUTLINE MATERIAL .50 FOR SHEET METAL PARTS ONLY .50 .50 8.90 .X ± 8.90 1.5 REV. DRAWING NO. SIZE .XX ± .75 6.00 6.00 B .XXX± .25 FINAL PROTECTIVE FINISH 2610-00025 .50 C .50 B B X° ± .5° .95 6 OF 5 .95 6 5 SCALE SHEET 1.6 9.000 1/1 SURFACE FINISH: 1.35 8.90 8.90 .25 .25 1.35 8.90 .30 .95 A 8.90 PRIMARY PRIMARY 1.35 .50 B .95 .95 .95 8.90 REF. 8.90 8.90 REF. Anode 6.00 REV REV2 A A B ADDED DESCA B ADDED INITIAL R ADDED ALTERNATE .50 8.90 8.90 6.00 B C MENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED 6.00 A A .95 .95 .50 2 8.90 8.90 8.90 6.00 REV A B 4.85 4.85 D ±.25 ±.25 .65 .65 4.85 ±.25 .65 8.90 .50 B B 8.90 REF. 8.90 3 Side View 9.11 9.11 .50 .50 3 3 .95 Top View REF. 4.85 ±.25 .65 4 4 R4.10 R4.10 D D ALTERNATIVE 8.90 8.90 2 4.85 ±.25 .65 4.85 ±.25 .65 6 5 9.11 6 5 9.11 NOTICE NOTICE THIS PLOT AND THE INFORMATION CREE CONFIDENTIAL. 8.90 CREE THISTHE PLOT AND CONTAINED WITHIN ARE PROPRIETARY AND 6 5THE INFORMATION 4 3 CONFIDENTIAL. 2 CREE, 1 CONTAINED WITHIN ARE THE PROPRIETARY REF.INFORMATION CONFIDENTIAL OF INC.AND THIS PLOT C CONFIDENTIAL INFORMATION OF CREE, THIS PLOT REVISONS MAYNOTICE NOT BE COPIED, REPRODUCED OR INC. DISCLOSED TO ANY C CONFIDENTIAL. MAY NOT BE THIS COPIED, REPRODUCED OR DISCLOSED TO ANY CREE PLOT AND THE INFORMATION UNAUTHORIZED PERSON THE WITHOUT WRITTEN CONSENT REV BY DATE APP'D UNAUTHORIZED PERSON THE WITHOUT WRITTEN CONSENT DESCRIPTION OFWITHIN CREE INC. CONTAINED ARE THE PROPRIETARY AND OF CREE INC. CONFIDENTIAL INFORMATION OF INC. THIS PLOT DC 5/14/12 A CREE, INITIAL RELEASE MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON THE WITHOUT WRITTEN CONSENT DC 8/19/15 B ADDED ALTERNATE VIEW/UPDATED STENCIL OF CREE INC. 8.90 4 8.90 8.90 D 9.11 8.90 REF. 1 4 3 ALL DIMENSIONS ARE ± .13MM UN ALL DIMENSIONS ARE ± .13MM UNL DRAW UNLESS OTHERWISE DRAWN SPECIFIE CRO ALL DIMENSIONSUNLESS AREDIMENSIONS ± OTHERWISE .13MM UNLESS OTHER ARESPECIFIED IND. CRON DIMENSIONSAND AREAFTER IND. CHEC MILLIMETERS FINI CHECK MILLIMETERS AND AFTER FINIS TOLERANCE UNLESSBY SPECIFIE DATE DRAWN TOLERANCE UNLESS OTHERWISE .XXSPECIFIED ±UNLESS .25 SPECIFIED APPR CRONIN 5/14/12 .XX ± ±D..25 DIMENSIONS ARE IN APPRO .XXX .125 DATE MILLIMETERS AND.XXX AFTER FINISH. X° ±CHECK ± .125 .5° X ° ± .5° MATE TOLERANCE UNLESS SPECIFIED: FOR SHEET METAL PARTS ON MATER .XX ±FOR .25SHEET METAL ONL DATE ±APPROVED 1.5 PARTS T .XXX± .125.X.X ± ± 1.5 .XX .75 X° ± .5° .XX ±MATERIAL .XXX ± .75 .25 FINAL P .XXX FOR SHEET METAL ONLY FINAL PR XPARTS ° ±± .25 .5° .5° .X ± SURFACE 1.5 X° ± FINISH: 1.6 S 1.6 .XX ± SURFACE .75 FINISH: FINAL PROTECTIVE 3 .XXX± .25 3 X° ± .5° 2 S 1.6 SURFACE FINISH: 2 Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 17 XLamp ® MT-G2 EasyWhite ® LED 6 5 4 3 2 1 REVISONS NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUTTHE WRITTEN CONSENT OF CREE INC. REV A Tape and Reel DESCRIPTION BY DATE Initial Release DC 5/14/12 APP'D All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard. D All dimensions in mm. D 1.5± .1 User Feed Direction 4±.10 12±.1 END 1.75 ±.10 START CATHODE SIDE 5.25 16 +.3 -.0 C 9.4 C ANODE SIDE Trailer 6 160mm (min) of empty pockets NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE sealed withINFORMATION tape CONTANED WITHIN ARE THE PROPRIETARY AND (15CREE, pockets CONFIDENTIAL INFORMATION OF INC.min.) THIS PLOT Loaded Pockets 4 (500 Lamps) 5 3 2 Leader 400mm (min) of INDEX empty pockets 1 sealed with tape 2 (35 pockets min.) MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE INC. 1 2400-00009 QTY ITEM COMMENTS 1 2 2400-00009-CORE 2400-00009-REEL D D B B C 12.4 +.2 .0 MEASURED AT HUB A C THIRD ANGLE PROJECTION 330 +.25 -.75 6 5 4 UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX ± .25 .XXX ± .125 X° ± .5 ° FOR SHEET METAL PARTS ONLY .X ± 1.5 .XX ± .75 .XXX ± .25 X° ± .5 ° 16.4 +0.2 .0 FINISH: MEASUREDSURFACE AT HUB DATE DRAWN BY D. CRONIN 4600 Silicon Drive Durham, N.C 27703 5/14/12 CHECK DATE -- Phone (919) 313-5300 -- APPROVED Fax (919) 313-5558 A DATE -- -- TITLE MTG LOADING SPEC MATERIAL -- SIZE -- 1.6 3 SCALE REV. DRAWING NO. C 1.9±.4 FINAL PROTECTIVE FINISH 2402-00022 A SHEET 3.000 2 OF 1 /1 1 21 ±.4 13.1 ±.2 B B 12.4 +1.0 -.5 MEASURED AT EDGE 60° 60° REVISONS REV A THIRD ANGLE PROJECTION UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX ± .01 .XXX ± .005 X° ± .5 ° FOR SHEET METAL PARTS ONLY .X ± .06 .XX ± .03 .XXX ± .010 X° ± .5 ° SURFACE FINISH: 6 5 4 3 63 BY DESCRIPTION DATE APP'D DATE DRAWN BY D. CRONIN 4600 Silicon Drive Durham, N.C 27703 09/29/09 CHECK DATE -- Phone (919) 313-5300 -- Fax (919) 313-5558 A DATE APPROVED -- -- MATERIAL ANTI-STATIC HIPS TITLE REEL, 13" X 12MM, 3 PIECE SNAP SIZE FINAL PROTECTIVE FINISH 2 SCALE C 0.500 REV. DRAWING NO. 2400-00009 SHEET A OF 1 /1 1 Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 18 XLamp ® MT-G2 EasyWhite ® LED Humidity Indicator Card (inside bag) Packaging Dessicant (inside bag) Unpackaged Reel Label with Cree Bin Code, Quantity, Reel ID Packaged Reel Label with Cree Bin Code, Qty, Lot # Vacuum-Sealed Moisture Barrier Bag Label with Cree Order Code, Quantity, Reel ID, PO # Label with Cree Bin Code, Quantity, Reel ID Label with Custo Code, Qty, Reel I Boxed Reel Label with Cree Order Code, Quantity, Reel ID, PO # Patent Label Label with Cree Bin Code, Quantity, Reel ID Patent Label Copyright © 2012-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC. 19