BYQ28E(F,B)-100 thru BYQ28E(F,B)-200, UG(F,B)10BCT Vishay General Semiconductor Dual Common Cathode Ultrafast Rectifier FEATURES • Glass passivated chip junction ITO-220AB TO-220AB • Ultrafast recovery times • Soft recovery characteristics • Low switching losses, high efficiency 2 3 2 1 1 BYQ28E & UG10 3 BYQ28EF & UGF10 PIN 1 PIN 2 PIN 1 PIN 3 CASE PIN 3 PIN 2 • High forward surge capability • Meets MSL level 1, per J-STD-020, LF maximum peak of 245 °C (for TO-263AB package) • Solder dip 260 °C, 40 s (for TO-220AB and ITO-220AB package) • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TO-263AB K TYPICAL APPLICATIONS For use in low voltage, high frequency rectifier of switching power supplies, freewheeling diodes, dc-to-dc converters and polarity protection application. 2 1 BYQ28EB & UGB10 K PIN 1 MECHANICAL DATA Case: TO-220AB, ITO-220AB, TO-263AB Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test, HE3 suffix for high reliability grade (AEC Q101 qualified), meets JESD 201 class 2 whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum HEATSINK PIN 2 PRIMARY CHARACTERISTICS IF(AV) 5Ax2 VRRM 100 V, 150 V, 200 V IFSM 55 A trr 25 ns VF 0.895 V TJ max. 150 °C MAXIMUM RATINGS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL UG10BCT UG10CCT UG10DCT BYQ28E-100 BYQ28E-150 BYQ28E-200 100 150 200 UNIT Maximum repetitive peak reverse voltage VRRM Working peak reverse voltage VRWM 100 150 200 V Maximum DC blocking voltage VDC 100 150 200 V total device per diode V IF(AV) 10 5 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load per diode IFSM 55 A Non-repetitive peak reverse current per diode at tp = 100 µs IRSM 0.2 A VC 8 kV TJ, TSTG - 40 to + 150 °C VAC 1500 V Maximum average forward rectified current at TC = 100 °C Electrostatic discharge capacitor voltage, human body model: C = 250 pF, R = 1.5 kΩ Operating junction and storage temperature range Isolation voltage (ITO-220AB only) from terminal to heatsink t = 1 min Document Number: 88549 Revision: 07-Jan-08 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 BYQ28E(F,B)-100 thru BYQ28E(F,B)-200, UG(F,B)10BCT Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS IF = 10 A IF = 5 A IF = 5 A Maximum instantaneous forward voltage per diode (1) Maximum reverse current per diode at working peak reverse voltage Maximum reverse recovery time per diode SYMBOL VALUE UNIT TJ = 25 °C TJ = 25 °C TJ = 150 °C VF 1.25 1.10 0.895 V TJ = 25 °C TJ = 100 °C IR 10 200 µA trr 25 ns IF = 1.0 A, dI/dt = 100 A/µs, VR = 30 V, Irr = 0.1 IRM Maximum reverse recovery time per diode IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A trr 20 ns Maximum stored charge per diode IF = 2 A, dI/dt = 20 A/µs, VR = 30 V, Irr = 0.1 IRM Qrr 9 nC UG10 UGF10 UGB10 BYQ28E BYQ28EF BYQ28EB Note: (1) Pulse test: 300 µs pulse width, 1 % duty cycle THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL Typical thermal resistance per diode, junction to ambient RθJA 50 55 50 Typical thermal resistance per diode, junction to case RθJC 4.5 6.7 4.8 UNIT °C/W ORDERING INFORMATION (Example) PACKAGE UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE TO-220AB BYQ28E-200-E3/45 PREFERRED P/N 1.80 45 50/tube Tube ITO-220AB BYQ28EF-200-E3/45 1.95 45 50/tube Tube TO-263AB BYQ28EB-200-E3/45 1.77 45 50/tube Tube TO-263AB BYQ28EB-200-E3/81 1.77 81 800/reel Tape reel TO-220AB BYQ28E-200HE3/45 (1) 1.80 45 50/tube Tube ITO-220AB BYQ28EF-200HE3/45 (1) 1.95 45 50/tube Tube TO-263AB BYQ28EB-200HE3/45 (1) 1.77 45 50/tube Tube TO-263AB BYQ28EB-200HE3/81 (1) 1.77 81 800/reel Tape reel Note: (1) Automotive grade AEC Q101 qualified www.vishay.com 2 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88549 Revision: 07-Jan-08 BYQ28E(F,B)-100 thru BYQ28E(F,B)-200, UG(F,B)10BCT Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 15 Instantaneous Reverse Current (µA) 1000 Average Forward Current (A) Resistive or Inductive Load 10 5 50 0 10 1 TJ = 25 °C 150 100 0 20 40 60 80 100 Case Temperature (°C) Percent of Rated Peak Reverse Voltage (%) Figure 1. Forward Current Derating Curve Figure 4. Typical Reverse Characteristics Per Diode Stored Charge/Reverse Recovery Time (nC/ns) 100 Peak Forward Surge Current (A) TJ = 100 °C 0.1 0 TC = 105 °C 8.3 ms Single Half Sine-Wave 10 1 10 1 50 at 2 A, 20 A/µs 40 at 5 A, 50 A/µs 30 at 1 A, 100 A/µs 20 at 5 A, 50 A/µs at 1 A, 100 A/µs 10 trr Qrr at 2 A, 20 A/µs 0 25 100 50 75 125 100 Number of Cycles at 60 Hz Junction Temperature (°C) Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Per Diode Figure 5. Reverse Switching Characteristics Per Diode 100 100 TJ = 125 °C f = 1.0 MHz Vsig = 50 mVp-p Pulse Width = 300 µs 1 % Duty Cycle Junction Capacitance (pF) Instantaneous Forward Current (A) TJ = 125 °C 100 10 TJ = 125 °C TJ = 100 °C 1 0.1 0.01 0.2 TJ = 25 °C 0.4 0.6 0.8 1.0 1.2 1.4 10 1 0.1 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Per Diode Figure 6. Typical Junction Capacitance Per Diode Document Number: 88549 Revision: 07-Jan-08 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 BYQ28E(F,B)-100 thru BYQ28E(F,B)-200, UG(F,B)10BCT Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-220AB ITO-220AB 0.370 (9.40) 0.360 (9.14) 0.185 (4.70) 0.175 (4.44) 0.154 (3.91) 0.148 (3.74) PIN 2 3 0.160 (4.06) 0.140 (3.56) 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.105 (2.67) 0.095 (2.41) 0.104 (2.65) 0.096 (2.45) 2 0.135 (3.43) DIA. 0.122 (3.08) DIA. 7° REF. 0.350 (8.89) 0.330 (8.38) 3 7° REF. 0.191 (4.85) 0.171 (4.35) 0.560 (14.22) 0.530 (13.46) 0.560 (14.22) 0.530 (13.46) 0.035 (0.89) 0.025 (0.64) 0.025 (0.64) 0.015 (0.38) 0.105 (2.67) 0.095 (2.41) 0.022 (0.56) 0.014 (0.36) 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.057 (1.45) 0.045 (1.14) 0.035 (0.90) 0.028 (0.70) 0.205 (5.20) 0.195 (4.95) 0.671 (17.04) 0.651 (16.54) PIN 1 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.140 (3.56) DIA. 0.125 (3.17) DIA. 0.600 (15.24) 0.580 (14.73) 0.603 (15.32) 0.573 (14.55) 7° REF. 0.076 (1.93) REF. 45° REF. 0.145 (3.68) 0.135 (3.43) 0.635 (16.13) 0.625 (15.87) 0.110 (2.79) 0.100 (2.54) 0.076 (1.93) REF. 0.055 (1.39) 0.045 (1.14) 0.113 (2.87) 0.103 (2.62) 1 0.190 (4.83) 0.170 (4.32) 0.404 (10.26) 0.384 (9.75) 0.415 (10.54) MAX. 0.028 (0.71) 0.020 (0.51) 0.205 (5.21) 0.195 (4.95) TO-263AB 0.411 (10.45) 0.380 (9.65) 0.190 (4.83) 0.160 (4.06) 0.245 (6.22) MIN. 0.055 (1.40) 0.045 (1.14) Mounting Pad Layout 0.42 (10.66) MIN. K 0.360 (9.14) 0.320 (8.13) 1 K 2 0.624 (15.85) 0.591 (15.00) 0 to 0.01 (0 to 0.254) 0.110 (2.79) 0.090 (2.29) 0.021 (0.53) 0.014 (0.36) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) www.vishay.com 4 0.055 (1.40) 0.047 (1.19) 0.205 (5.20) 0.195 (4.95) 0.140 (3.56) 0.110 (2.79) 0.33 (8.38) MIN. 0.670 (17.02) 0.591 (15.00) 0.15 (3.81) MIN. 0.08 (2.032) MIN. 0.105 (2.67) 0.095 (2.41) For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88549 Revision: 07-Jan-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1