Trompeter Patch-Jack Series Connectivity for Business Critical Continuity HDVDP & HDVDPM Emerson Network Power Connectivity Solutions offers Key Features & Benefits Trompeter’s HDVDP and HDVDPM Patch Jacks designed and engineered to exceed SMPTE 292M specifications for high definition video transmission and connectivity. ■ The normal-thru contact interface design of HDVDP/HDVDPM consists of a self-aligning normal-thru U-slot, two redundant points of contact, an independent applied normal force at each contact point, and a mechanical wipe region at each contact interface location. These design attributes provide reliable and repeatable patching/ un-patching, resulting in low-level contact resistance stability. Samples and information can be obtained by contacting Trompeter’s customer service department at: 800.247.8256, or through the website at www.EmersonConnectivity.com ■ High-reliability normal-thru contact design ■ Self wiping normal thru contact ■ Streamlined design for repeatable Lightweight design: HDVDPT (full size): 47.8 grams HDVDPMT (mini) 34.2 grams manufacturability Connectivity for Business Critical Continuity SMPTE Requirements Parameter HD (SMPTE 292) SD (SMPTE 259) Comments Coaxial Cable Coaxial Cable 75 ohm, low loss, double shielded BNC BNC 75 ohm version Cable Length 80 meters 300 meters Depending on cable type Bit Rate 1.485 Gbps 270 Mbps 145.5 MHz word clock x 10 27 MHz work clock x 10 -15dB or better @ 5MHz to 1.485 GHz -15dB or better @ 5MHz to 1.485 GHz Nominal into 75 ohm termination 800 mV P-P +/- 10% 800 mV P-P +/- 10% Nominal into 75 ohm termination <0.2 UI or <134.68 pS <0.2 UI or <134.68 pS HD UI = 673.4 pS SD UI = 3.7 nS 0.0 V +/- 0.5 V 0.0 V +/- 0.5 V Nominal at mid-amplitude <270 pS, <100pS diff. <270 pS, <100pS diff. 20% - 80% Connection Medium Connector Type Return Loss Voltage Levels Jitter DC Offset Rise/Fall Times HDVDP/HDVDPM Performance vs. SMPTE 292 Requirements Parameter Return Loss (S1,1) SMPTE 292 M HDVDPMT (mini) HDVDPT (full size) -15 dB or better @ 5 MHz to 1.485 GHz S1, 1 <-26 dB S1, 1 <-26 dB Voltage Levels Jitter Rise/Fall Times 800 mV P-P +/- 10% 760 mV 760 mV <0.2 UI or <134.68 pS @ 1.485 Gbps .082 UI or 55 pS .082 UI or 55 pS <270 pS, ∆RFT <100 pS @ 1.485 Gbps RT = 220 pS FT = 200 pS ∆RFT = 30 pS RT = 220 pS FT = 200 pS ∆RFT = 30 pS Typical Time-Domain Eye Pattern Full Size and Mini Patch-Jacks (Jitter and Rise time measures shown in table) Part Number EmersonNetwork Power Connectivity Solutions 299 Johnson Avenue SW Ste 100 Waseca,MN 56093 USA 507.833.8822 or 800.247.8256 www.EmersonConnectivity.com Description HDVDPT Full-size WECo format, terminated HDVDP Full-size WECo format, non terminated HDVDPMT mini WECo format, terminated HDVDPM mini WECo format, non-terminated HDVDPN Fill-size WECo format, non terminated HDVDPMN mini WECo format, non-terminated Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2011 Emerson Electric Co. TR.1052.08