AHP6301 63W Me d i c a l P o wer A dapt ers f or H ealt h Ca re Ap p lica tio n s series Wide 80-275VAC Input Medical Safety IEC60601-1 3rd Edition; 2MOPP medical Choice of IEC320-C14, C8 or C6 Input Receptacles Single Outputs from 12 to 48 VDC HPU63B series 63 The HPU63B Efficiency Level series V of AC/DC switching mode power supplies provide 63 Watts of continuous output power . All supplies are min compliant. All models meet FCC Part-18 class B and ClassUL94V-1 I or Class II CISPR-11 EN55011 class B emission Limits and are designed to comply with ANSI/AAMI ES 60601-1: 2005(UL/cUL 3rd Edition), EN 60601-1:2006 (TUV/T-mark 3rd Edition) and new CE requirements. All units are 100% burned in and tested. RoHS2 2011/65/EU Model Number Output Watts Output Voltage Output Amps Efficiency Total Regulation *AHP6301(A,B,C)-05 *AHP6301(A,B,C)-06 *AHP6301(A,B,C)-07 *AHP6301(A,B,C)-08 *AHP6301(A,B,C)-09 *AHP6301(A,B,C)-10 *AHP6301(A,B,C)-11 63 63 63 63 63 63 63 84% ±5% 85% ±5% 85% ±5% 85% ±3% 86%APPROVALS: ±3% 86% ±3% 86% ±3% * Note: 12VDC 15VDC 18VDC 24VDC 30VDC 36VDC 48VDC 5.25 4.20 3.50 2.62 2.10 1.75 1.31 * Wide O * IEC-32 * Single * Over V * Medic * Input t * Energy * Class II * 3 year APPLIC * Home * Patien * Blood * Portab * ECG m GENER CB EN 60601-1 IEC 60601-1 PS E Electrical Characteristics: Symbol FEATU * Short C * Coolin * Flamm * Protec * Safety (TUV/T-m Characteristic Safety Approval Input Voltage Range Safety Approval Specification i Vins (A) The Asterisk * denotes a choice of receiving this product with an IEC-320-C14 3 Pole Input Receptacle or with an IEC-320-C8 2 Pole Input Receptacle (B) or & with an IEC-320-C6 3 Pole Input Receptacle (C). See the Mechanical files at the end of this specification Simply add the letter “A”, “B” or “C” afterto“AHP6301 Input Operate Voltage Range Detail see Fig.1 in (Derate linearly Vin for clarity. the model number (i.e. “AHP6301A-05” for C14 or “AHP6301B-05” for C8 or “AHP6301C-05” forFiC6) when ordering to receive the desired version. Input Frequency Sine wave WWW.ASTRODYNETDI.COM Po Output Power Range See Rating Chart Iil Low Line Input Current Full Load, Vin=100VAC Iih High Line Input Current Full Load, Vin=240VAC Irl Low Line Input Inrush Current Full Load, 25°C, Cool start, Vin=1 Irh High Line Input Inrush Current Full Load, 25°C, Cool start, Vin=2 Efficiency Full Load, Vin=230VAC, Detail to △Voi Line Regulation Full Load, Vin=100~120VAC or 20 OVP Over Voltage Protection OLP Over Load Protection Recovers automatically after fau ttr Time of Transient Response Full Load, Vin=110VAC thu Hold-Up Time Full Load, Vin=100VAC ts Start-up time Full Load, Vin=100~240VAC Tc Temperature Coefficient All Condition HV Dielectric Withstanding Voltage (P-S) Primary to Secondary, limit curre EMI EMC Emission Compliance to EN55011 (CISPR1 ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 Environmental: Symbol Characteristic 63W Me d i c a l P o wer A dapt ers f or H ealt h Ca re Ap p lica tio n s INPUT SPECIFICATIONS Input Voltage Range Frequency Range Input Current Inrush Current, typ (Cold Start) Leakage Current (240 Vin) No Load Power Consumption 80-275 VAC (100-240 Nominal) 47-63 Hz Low Line (100VAC) 1.62A max. High Line (240VAC) 0.72A max. Low Line (100VAC) 37A max. High Line (240VAC) 74A max. 0.1mA 0.5 Watts See Selection Charts 0 to FL Rating ±5%, max. 60%L, changing ±10% ±1%, max. changing line ±10% 110-150%, Auto-Recovery 112-132% Auto Recovery 110Vin, FL 4mS ±0.04%/°C, typ 100mV Pk-Pk max. 100~240Vin, FL 12mS min. 100~240Vin, FL 0.3S typ., 2S max. GENERAL SPECIFICATIONS Input-Out Isolation Input-GND Isolation Resistance Efficiency Safety Protection Class series PHYSICAL SPECIFICATIONS OUTPUT SPECIFICATIONS Voltage and Current Output Power Range Load Regulation Line Regulation (FL) Over Load Protection* Over Voltage Protection* Short Circuit Protection Transient Response Temperature Coefficient Ripple/Noise (Note 1) Hold Up Time (Note 2) Start Up Time AHP6301 4000 VAC, Limit Current <10mA 2800 VDC 50MΩ (FL, 230Vin) See Selection Chart ANSI/AAMI ES 60601-1:2005 (UL/cUL 3rd Edition), EN 60601-1:2006 (TUV/T-mark 3rd Edition) AHP6301A, 6301C: Class I AHP6301B: Double Insulated Class II All specifications are typical at nominal input, full load, and 25°C unless otherwise noted WWW.ASTRODYNETDI.COM Size Construction Weight Flammability Rating 5.17” x 2.18” x 1.46” (131 x 55.4 x 37mm) Desktop Style 13.4oz (380g) UL94V-1 ENVIRONMENTAL SPECIFICATIONS Oper. Temperature Cooling Storage Temperature Operating Humidity EMC MTBF (MIL-HDBK-217F) Surge Voltage ESD - Air ESD - Contact Operating Altitude (Elevation) Vibration Drop Test -10 to +40°C (FL) * 50% Load @ 70°C (See Derate Curve Last Page) Free Air Convection -40 to +85°C, 10~95% RH * 0% to 95%, non-cond * Compliance to EN55011 (CISPR11), EN61000-3-2, -3 Class B 100,000 Hrs 2kV IEC61000-4-2, 8kV IEC61000-4-2, 6kV 3000M 5G, 10 ~ 500Hz, 10min./1cycle, 60min. each along X, Y, Z axes 120cm, 1 ea. on six sides NOTES 1. Ripple & noise is measured by using 20MHz bandwidth limited oscilloscope and terminated each output with a 0.47uF capacitor at rated load and nominal line. 2. Hold up time is measured from the end of the last charging pulse to the time which the main output drops down to low limit of main output at rated load and nominal line. * These are stress ratings. Exposure of the devices to any of these conditions may adversely affect long term reliability. Proper operation under conditions other than the standard operating conditions is neither warranteed nor implied. ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 AHP6301 63W Me d i c a l P o wer A dapt ers f or H ealt h Ca re Ap p lica tio n s series MECHANICAL DIMENSIONS - AHP6301A Dimensions are In mm [inches]. DC OUTPUT CONNECTIONS Coaxial Plug: -Vout +Vout 5.5mm outer diameter 2.1mm inner diameter, female 11mm length, center “+” AHP6301x-05~07 Output Cord Length 48”, 16AWG AHP6301x-08~10 Output Cord Length 72”, 18AWG Modifying the output cable will effect Regulation and Efficiency WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 AHP6301 63W Me d i c a l P o wer A dapt ers f or H ealt h Ca re Ap p lica tio n s series MECHANICAL DIMENSIONS - AHP6301B Dimensions are In mm [inches]. DC OUTPUT CONNECTIONS Coaxial Plug: -Vout +Vout 5.5mm outer diameter 2.1mm inner diameter, female 11mm length, center “+” AHP6301x-05~07 Output Cord Length 48”, 16AWG AHP6301x-08~10 Output Cord Length 72”, 18AWG Modifying the output cable will effect Regulation and Efficiency WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 AHP6301 63W Me d i c a l P o wer A dapt ers f or H ealt h Ca re Ap p lica tio n s series MECHANICAL DIMENSIONS - AHP6301C Dimensions are In mm [inches]. DC OUTPUT CONNECTIONS Coaxial Plug: -Vout +Vout 5.5mm outer diameter 2.1mm inner diameter, female 11mm length, center “+” AHP6301x-05~07 Output Cord Length 48”, 16AWG AHP6301x-08~10 Output Cord Length 72”, 18AWG Modifying the output cable will effect Regulation and Efficiency WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 AHP6301 series DERATE CURVES 63W External Medical Grade Power Supply 110 100 LOAD (%) 90 80 70 60 50 80 100 -10 0 120 140 160 180 200 220 INPUT VOLTAGE (VAC) (FIG.1) INPUT VOLTAGE DERATING CURVE 240 260 280 110 100 90 80 70 60 50 40 30 20 10 0 10 20 30 40 50 TEMPERATURE (°C) (FIG.2) TEMPERATURE DERATING CURVE 60 70 80 OUTPUT CABLE RECOMMEND : 1. Selected output connectors and wire, please refer to Appendix. 2. HPU63B-105~107 are required to use AWG#16 / 4FT output cable. 3. HPU63B-108~111 are required to use AWG#18/ 6FT output cable. 4. The regulation and efficiency will be changed by modified output cable. PACKING : 1. Net weight: 330~380g approx. 2. Optional output connectors available contact sales for details. Ripple & Noise Total Regulation Typ. Efficiency No Load Consumption Hold-Up Time (W) (mVp-p) (%) (%) (W) (ms) WWW.ASTRODYNETDI.COM ±5 63 100 85 63 100 ±5 84 0.5 12 Protection Mode Maximum Output Power ent 63W Me d i c a l P o wer A dapt ers f or H ealt h Ca re Ap p lica tio n s OLP 0.5 12 OLP 63 100 ±5 85 0.5 12 OLP 63 100 ±3 85 0.5 12 OLP 0315 ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458