INTEGRATED MODULAR JACK 10/100/1000 Gigabit Ethernet RJ45 2xN Port Options: 2x1, 2x4, 2x6, 2x8 Port Meets or exceeds IEEE 802.3 standard for 10/100/1000 Base-TX Suitable for CAT 5 & 6 Fast Ethernet Cable or better UTP Available with or without LEDs 350 uH minimum OCL with 8mA DC bias current Minimum 1500Vrms isolation per IEEE802.3 requirement Operating temperature 0°C to +70°C Storage temperature -40°C to +85°C Patent No.: Taiwan - M288027, M287944, file94219539 U.S.A. - file11/274,137 file11/284,812 file11/304,735 Japan - 3119145, 3119556, 3119683 Germany - 20 2005 019 158.2, 20 2005 019 160.4, 20 2005 019 479.4 TRANSFORMER ELECTRICAL SPECIFICATIONS AT 25°C Insertion Loss (dB max.) Turns Ratio LEDs TD1/2/3/4 (U/D) 1-100 MHz Part Number Return Loss 100ȍ±15ȍ (dB min.) 100-125 1 -30 MHz MHz Cross talk (dB min.) 30-60 60-80 80-100 MHz MHz MHz 1-30 MHz Hi - pot ( Vrms ) C.M.R. (dB min.) 30-60 60-100 1 -60 60-100 MHz MHz MHz MHz 60Hz/1min G29TS-610130A 1CT:1CT N/N -1.0 -1.2 -18 -16 -12 -10 -40 -35 -30 -40 -30 1500 G29TS-710130A 1CT:1CT N/N -1.0 -1.2 -18 -16 -12 -10 -40 -35 -30 -40 -30 1500 G29TS-810130A 1CT:1CT N/N -1.0 -1.2 -18 -16 -12 -10 -40 -35 -30 -40 -30 1500 G29TS-910130A 1CT:1CT N/N -1.0 -1.2 -18 -16 -12 -10 -40 -35 -30 -40 -30 1500 G29TS-610150A 1CT:1CT N/N -1.0 -1.2 -18 -16 -12 -10 -40 -35 -30 -40 -30 1500 G29TS-710150A 1CT:1CT N/N -1.0 -1.2 -18 -16 -12 -10 -40 -35 -30 -40 -30 1500 G29TS-810150A 1CT:1CT N/N -1.0 -1.2 -18 -16 -12 -10 -40 -35 -30 -40 -30 1500 G29TS-910150A 1CT:1CT N/N -1.0 -1.2 -18 -16 -12 -10 -40 -35 -30 -40 -30 1500 G31TS-61013HA 1CT:1CT GO / N -1.0 -1.2 -18 -16 -12 -10 -40 -35 -30 -40 -30 1500 G31TS-71013HA 1CT:1CT GO / N -1.0 -1.2 -18 -16 -12 -10 -40 -35 -30 -40 -30 1500 G31TS-81013HA 1CT:1CT GO / N -1.0 -1.2 -18 -16 -12 -10 -40 -35 -30 -40 -30 1500 G31TS-91013HA 1CT:1CT GO / N -1.0 -1.2 -18 -16 -12 -10 -40 -35 -30 -40 -30 1500 G31TS-61015HA 1CT:1CT GO / N -1.0 -1.2 -18 -16 -12 -10 -40 -35 -30 -40 -30 1500 G31TS-71015HA 1CT:1CT GO / N -1.0 -1.2 -18 -16 -12 -10 -40 -35 -30 -40 -30 1500 G31TS-81015HA 1CT:1CT GO / N -1.0 -1.2 -18 -16 -12 -10 -40 -35 -30 -40 -30 1500 G31TS-91015HA 1CT:1CT GO / N -1.0 -1.2 -18 -16 -12 -10 -40 -35 -30 -40 -30 1500 NOTES : 1. LEDs Up / Down G=green, O=orange 2. C.M.R. = Common Mode Rejection NOTE : Specifications subject to change without notice. Please check our website for latest information. 12.05.2008 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 1 INTEGRATED MODULAR JACK 10/100/1000 Gigabit Ethernet RJ45 2xN Port MATERIAL SPECIFICATION Metal Shell : Copper Alloy, Finish: 50u" Nickel Housing / Bottom Cover : Thermoplastic , UL 94V-0, Color Black Insert : Thermoplastic , UL 94V-0, Color Black Contact Terminal / Phosphor Bronze 15u" Gold on Contact Area, 100u" Tin on Solder, Both over 50u" Nickel Under-Plated Coil Base : Thermoplastic , UL 94V-0, Color Black SCHEMATIC Vcc P9 Vcc P9 x1013 0.1uFx4 P2 75ȍx4 J1 x1015 0.1uFx4 P2 TD1 75ȍx4 J1 TD1 P1 P4 J2 P1 J3 P4 TD2 J2 J3 TD2 P3 P6 J6 P3 J4 P6 TD3 J6 J4 TD3 P5 P8 J5 P5 J7 P8 TD4 J5 J7 TD4 J8 P7 P10 GND Shield P10 GND 1000pF/2KV J8 P7 Shield 1000pF/2KV LED CONFIGURATION Standard LED Wavelength(Ȝ) V / IF=20mA max. typ. Orange 605nm 2.5 V 2.1 V Green 570nm 2.5 V 2.1 V Green 11 LEDs Orange 12 NOTE : Specifications subject to change without notice. Please check our website for latest information. 12.05.2008 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 2 INTEGRATED MODULAR JACK 10/100/1000 Gigabit Ethernet RJ45 2xN Port MECHANICAL : G29TS-610xx0A (2x1) Marking 28.07 4.26 3.18 25.45 26.30 (26.35) 18.90 G29TS-610130A Superworld 0601 PANEL CUT OUT 4.57 11.43 10.80 15.49 (19.07) 17.27 Port 2 J8 J1 J1 J8 Port 1 Port 1 Port 2 P1 P9 P2 P10 P1 P9 0.3x0.5 6.60 4.06 Ø1.58 x4 11.43 4.57 1.27 4.70 15.49 11.43 (1.27x9) Ø0.89 x20 Ø3.2 x2 2.42 2.79 2.79 11.43 Suggested PCB Pad Layout Component Side View NOTES : 1. Tolerance : PCB ±0.05mm Connecetor ±0.25mm 2. Connector dimensions comply with FCC 68.5 dimension requirements NOTE : Specifications subject to change without notice. Please check our website for latest information. 12.05.2008 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 3 INTEGRATED MODULAR JACK 10/100/1000 Gigabit Ethernet RJ45 2xN Port MECHANICAL : G29TS-710xx0A (2x4) Marking 28.07 0.15 G29TS-710130A Superworld 0601 4.26 3.18 3.56 25.45 26.30 (26.35) 60.20 PANEL CUT OUT 4.57 11.43 15.49 10.80 17.27 (60.98) 59.18 Port 2 Port 8 J8 J1 J8 J1 J8 J1 J8 J1 J1 J8 J1 J8 J1 J8 J1 J8 Port 1 Port 7 Port 1 2 P1 P9 P2 P10 3 4 6 7 P1 P9 P9 (15.49) 27.94 Ø0.89 x80 8 P2 P10 P1 P9 0.3x0.5 6.60 4.06 Ø1.58 x7 11.43 (1.27x9) 13.97 11.43 NO TRACE ZONE 4.57 4.70 15.49 17.27 5 P1 Ø3.2 x2 7.37 2.42 1.27 13.97 2.79 1.27 53.34 2.79 Suggested PCB Pad Layout Component Side View NOTES : 1. Tolerance : PCB ±0.05mm Connecetor ±0.25mm 2. Connector dimensions comply with FCC 68.5 dimension requirements NOTE : Specifications subject to change without notice. Please check our website for latest information. 12.05.2008 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 4 INTEGRATED MODULAR JACK 10/100/1000 Gigabit Ethernet RJ45 2xN Port MECHANICAL : G29TS-810xx0A (2x6) G29TS-810130A Superworld 0601 Marking 28.07 0.15 4.26 3.56 3.18 25.45 26.30 (26.35) 88.10 PANEL CUT OUT 4.57 11.43 15.49 10.80 17.27 (88.92) 87.12 Port 2 Port 12 J8 J1 J8 J1 J8 J1 J8 J1 J8 J1 J8 J1 J1 J8 J1 J8 J1 J8 J1 J8 J1 J8 J1 J8 Port 1 Port 11 Port 1 2 P1 P9 P2 P10 3 4 6 7 8 9 10 11 P1 P9 P9 (15.49) 55.88 12 P2 P10 P1 P9 0.3x0.5 6.60 13.97 Ø0.89 x120 4.06 11.43 (1.27x9) Ø1.58 x9 11.43 NO TRACE ZONE 4.57 4.70 15.49 17.27 5 P1 Ø3.2 x2 2.42 1.27 13.97 2.79 1.27 81.28 2.79 Suggested PCB Pad Layout Component Side View NOTES : 1. Tolerance : PCB ±0.05mm Connecetor ±0.25mm 2. Connector dimensions comply with FCC 68.5 dimension requirements NOTE : Specifications subject to change without notice. Please check our website for latest information. 12.05.2008 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 5 INTEGRATED MODULAR JACK 10/100/1000 Gigabit Ethernet RJ45 2xN Port MECHANICAL : G29TS-910xx0A (2x8) Marking 28.07 0.15 4.26 3.56 3.18 25.45 26.30 (26.35) 116.10 G29TS-910130A Superworld 0601 PANEL CUT OUT 4.57 11.43 15.49 10.80 17.27 (116.86) 115.06 Port 2 Port 16 J8 J1 J8 J1 J8 J1 J8 J1 J8 J1 J8 J1 J8 J1 J8 J1 J1 J8 J1 J8 J1 J8 J1 J8 J1 J8 J1 J8 J1 J8 J1 J8 Port 1 Port 15 Port 1 2 P1 P9 P2 P10 3 4 6 7 8 9 10 11 12 13 14 15 P1 P9 P9 (15.49) Ø0.89 x160 83.82 16 P2 P10 P1 P9 0.3x0.5 6.60 4.06 Ø1.58 x11 11.43 (1.27x9) 13.97 11.43 NO TRACE ZONE 4.57 4.70 15.49 17.27 5 P1 Ø3.2 x2 2.42 1.27 13.97 2.79 1.27 2.79 109.22 Suggested PCB Pad Layout Component Side View NOTES : 1. Tolerance : PCB ±0.05mm Connecetor ±0.25mm 2. Connector dimensions comply with FCC 68.5 dimension requirements NOTE : Specifications subject to change without notice. Please check our website for latest information. 12.05.2008 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 6 INTEGRATED MODULAR JACK 10/100/1000 Gigabit Ethernet RJ45 2xN Port MECHANICAL : G31TS-610xxHA (2x1) 18.90 Marking G31TS-61013HA Superworld 0601 4.26 3.18 25.45 (26.35) 26.30 30.60 PANEL CUT OUT 11.43 4.57 15.49 10.80 (19.07) 18.47 Port 2 17.27 LED lower port LED upper port J8 J1 J1 J8 Port 1 Port 1 Port 2 P1 P1 P2 0.5x0.5 P9 P9 P10 P11 P12 0.3x0.5 P12 P11 12.18 0.38 9.27 2.54 Ø1.02 x4 7.10 Ø0.89 x20 11.43 (1.27x9) 4.57 1.27 11.43 15.49 4.70 18.47 Ø1.58 x4 4.06 2.42 2.79 Ø3.2 x2 6.60 11.43 2.79 Suggested PCB Pad Layout Component Side View NOTES : 1. Tolerance : PCB ±0.05mm Connecetor ±0.25mm 2. Connector dimensions comply with FCC 68.5 dimension requirements NOTE : Specifications subject to change without notice. Please check our website for latest information. 12.05.2008 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 7 INTEGRATED MODULAR JACK 10/100/1000 Gigabit Ethernet RJ45 2xN Port MECHANICAL : G31TS-710xxHA (2x4) Marking 30.60 0.15 4.26 3.18 25.45 26.30 (26.35) 60.20 G31TS-71013HA Superworld 0601 PANEL CUT OUT 4.57 11.43 15.49 10.80 LED lower port 18.47 LED upper port (60.98) 59.18 Port 2 Port 8 J8 J1 J8 J1 J8 J1 J8 J1 J1 J8 J1 J8 J1 J8 J1 J8 Port 7 Port 1 Port 1 2 P1 P2 3 4 5 6 7 P1 P1 P9 P9 8 P2 P1 0.5x0.5 P9 P10 P11 P12 0.38 13.97 P12 P11 P11 P12 P11 P12 P12 P11 P11 P12 P9 0.3x0.5 P12 P11 6.60 2.54 1.79 Ø0.89 x80 4.06 2.54 Ø1.02 x16 11.43 (1.27x9) Ø1.58 x4 11.43 4.70 4.57 15.49 18.47 P12 P11 P10 NO TRACE ZONE 2.42 13.97 2.79 Ø3.2 x2 1.27 1.27 2.79 53.34 Suggested PCB Pad Layout Component Side View NOTES : 1. Tolerance : PCB ±0.05mm Connecetor ±0.25mm 2. Connector dimensions comply with FCC 68.5 dimension requirements NOTE : Specifications subject to change without notice. Please check our website for latest information. 12.05.2008 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 8 INTEGRATED MODULAR JACK 10/100/1000 Gigabit Ethernet RJ45 2xN Port MECHANICAL : G31TS-810xxHA (2x6) G31TS-81013HA Superworld 0601 Marking 30.60 0.15 3.18 4.26 25.45 26.30 (26.35) 88.10 PANEL CUT OUT 4.57 11.43 15.49 10.80 LED lower port 18.47 LED upper port (88.92) 87.12 Port 2 Port 12 J8 J1 J8 J1 J8 J1 J8 J1 J8 J1 J8 J1 J1 J8 J1 J8 J1 J8 J1 J8 J1 J8 J1 J8 Port 1 Port 11 Port 1 2 P1 P2 3 4 5 6 7 8 9 10 11 P1 P1 P9 P9 12 P2 P1 0.5x0.5 P9 P10 P11 P12 0.38 13.97 1.79 Ø0.89 x120 P11 P12 P12 P11 P12 P11 P11 P12 P11 P12 P12 P11 2.54 2.54 P11 P12 P12 P11 P11 P12 P9 0.3x0.5 P12 P11 6.60 Ø1.02 x24 4.06 11.43 (1.27x9) Ø1.58 x4 11.43 4.70 4.57 15.49 18.47 P12 P11 P10 NO TRACE ZONE 2.42 13.97 2.79 Ø3.2 x2 1.27 1.27 2.79 81.28 Suggested PCB Pad Layout NOTES : 1. Tolerance : PCB ±0.05mm Component Side View Connecetor ±0.25mm 2. Connector dimensions comply with FCC 68.5 dimension requirements NOTE : Specifications subject to change without notice. Please check our website for latest information. 12.05.2008 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 9 INTEGRATED MODULAR JACK 10/100/1000 Gigabit Ethernet RJ45 2xN Port MECHANICAL : G31TS-910xxHA (2x8) Marking 30.60 0.15 3.18 4.26 25.45 26.30 (26.35) 116.10 G31TS-91013HA Superworld 0601 PANEL CUT OUT 4.57 11.43 15.49 10.80 LED lower port LED upper port 18.47 (116.86) 115.06 Port 2 Port 16 J8 J1 J8 J1 J8 J1 J8 J1 J8 J1 J8 J1 J8 J1 J8 J1 J1 J8 J1 J8 J1 J8 J1 J8 J1 J8 J1 J8 J1 J8 J1 J8 Port 1 Port 15 Port 1 2 P1 P2 3 4 5 6 7 8 9 10 11 12 13 14 15 P1 P1 P9 P9 16 P2 P1 0.5x0.5 P9 P10 P11 P12 0.38 13.97 1.79 Ø0.89 x160 P11 P12 P12 P11 P11 P12 P12 P11 P11 P12 P12 P11 P11 P12 P12 P11 P11 P12 P12 P11 P11 P12 P12 P11 P11 P12 2.54 0.3x0.5 P12 P11 6.60 4.06 Ø1.02 x32 2.54 P9 11.43 (1.27x9) Ø1.58 x4 11.43 NO TRACE ZONE 4.57 4.70 15.49 18.47 P12 P11 P10 Ø3.2 x2 2.42 13.97 2.79 2.79 1.27 1.27 109.22 Suggested PCB Pad Layout Component Side View NOTES : 1. Tolerance : PCB ±0.05mm Connecetor ±0.25mm 2. Connector dimensions comply with FCC 68.5 dimension requirements NOTE : Specifications subject to change without notice. Please check our website for latest information. 12.05.2008 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 10