MA-COM MAATCC0006-TB Digital attenuator Datasheet

MAATCC0006
Digital Attenuator
30.0 dB, 4-Bit, TTL Driver, DC-3.0 GHz
Rev. V4
Features
•
•
•
•
•
•
•
•
•
•
Attenuation: 2.0 dB steps to 30 dB
Low DC Power Consumption
Integral TTL Driver
50 Ohm Impedance
Temperature Stability: ±0.18 dB from -55°C to
+85°C Typ.
Lead-Free SO-16 Package
100% Matte Tin Plating over Copper
Halogen-Free “Green” Mold Compound
260°C Reflow Compatible
RoHS* Compliant Version of AT65-0233
Schematic with Off-Chip Components or
Functional Block Diagram
Description
M/A-COM’s MAATCC0006 is a GaAs FET 4-bit
digital attenuator with a 2.0 dB minimum step size
and a 30 dB total attenuation range. This device is in
a SOIC-16 plastic surface mount package. The
MAATCC0006 is ideally suited for use where
accuracy, fast speed, very low power consumption
and low costs are required. Typical applications
include dynamic range setting in precision receiver
circuits and other gain/leveling control circuits.
Pin Configuration
Ordering Information
Part Number
Package
MAATCC0006
Bulk Packaging
MAATCC0006TR
1000 piece reel
MAATCC0006-TB
Sample Test Board
Pin No.
Function
Pin No.
Function
1
GND
9
C2
2
RF1
10
C1
3
GND
Note: Reference Application Note M513 for reel size
information.
1.
11
GND
4
NC
1
12
GND
5
Vee
13
NC1
6
Vcc
14
GND
7
C4
15
RF2
8
C3
16
GND
NC = No Connection
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MAATCC0006
Digital Attenuator
30.0 dB, 4-Bit, TTL Driver, DC-3.0 GHz
Rev. V4
Electrical Specifications: TA = 25°C
Parameter
Test Conditions
Frequency
Units
Min
Typ
Max
Insertion Loss
—
DC - 0.5 GHz
DC - 2.0 GHz
DC - 3.0 GHz
dB
dB
dB
—
—
—
1.7
2.3
2.6
2.0
2.7
3.1
Attenuation Accuracy
Any Bit or Combination of Bits
DC - 3.0 GHz
dB
± (.4 + 8% of
attenuation)
± (.4 + 8% of
attenuation)
± (.4 + 8% of
attenuation)
VSWR
Full Range
DC - 3.0 GHz
Ratio
—
—
1.7:1
Trise, Tfall
Ton, Toff
Transients
10% to 90%
50% Cntl to 90%/10% RF
In-Band
10% to 90%
50% Cntl to
90%/10% RF
In-Band
nS
nS
mV
—
—
—
10
30
35
50
150
—
1 dB Compression
Input Power
Input Power
0.05 GHz
0.5 - 3.0 GHz
dBm
dBm
—
—
+20
+28
—
—
Input IP3
Two-tone inputs up to +5 dBm
0.05 GHz
0.5 - 3.0 GHz
dBm
dBm
—
—
+40
+50
—
—
Input IP2
Two-tone inputs up to +5 dBm
0.05 GHz
0.5 - 3.0 GHz
dBm
dBm
—
—
+45
+68
—
—
VCC
VEE
—
—
—
—
V
V
4.5
-8.0
5.0
-5.0
5.5
-4.75
VIL
VIH
LOW-level input voltage
HIGH-level input voltage
—
—
V
V
0.0
2.0
—
—
0.8
5.0
lin (Input Leakage Current)
Vin = VCC or GND
—
uA
-1.0
—
1.0
Icc
(Quiescent Supply Current)
Vcntrl = VCC or GND
—
uA
—
250
400
ΔIcc
(Additional Supply Current
Per TTL Input Pin)
VCC = Max, Vcntrl = VCC - 2.1 V
—
mA
—
—
1.0
IEE
VEE min to max, Vin = VIL or VIH
—
mA
-1.0
-0.2
—
Absolute Maximum Ratings 2,3
Parameter
Max. Input Power
0.05 GHz
0.5 - 3.0 GHz
3.
4.
+27 dBm
+34 dBm
VCC
-0.5V ≤ VCC ≤ +7.0V
VEE
-8.5V ≤ VEE ≤ +0.5V
VCC - VEE
-0.5V ≤ VCC - VEE ≤ 14.5V
Vin
2.
Absolute Maximum
4
-0.5V ≤ Vin ≤ VCC + 0.5V
Operating Temperature
-40ºC to +85ºC
Storage Temperature
-65ºC to +125ºC
Exceeding any one or combination of these limits may cause
permanent damage to this device.
M/A-COM does not recommend sustained operation near
these survivability limits.
Standard CMOS TTL interface, latch=up will occur if logic
signal applied prior to power supply.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MAATCC0006
Digital Attenuator
30.0 dB, 4-Bit, TTL Driver, DC-3.0 GHz
Rev. V4
Truth Table (Digital Attenuator)
Handling Procedures
Please observe the following precautions to avoid
damage:
C1
C2
C3
C4
Attenuation
0
0
0
0
Loss, Reference
Static Sensitivity
1
0
0
0
2.0 dB
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
0
1
0
0
4.0 dB
0
0
1
0
8.0 dB
0
0
0
1
16.0 dB
1
1
1
1
30.0 dB
0 = TTL Low; 1 = TTL High
Typical Performance Curves
Attenuation Accuracy, 2 dB
Loss (dB)
3
2
1
0
0
0.5
1
1.5
2
2.5
3
Deviation from Nom. Atten. (dB)
Typical Insertion Loss (dB)
0.6
0.4
0.2
0
-0.2
-0.4
-0.6
0
0.5
0.6
0.4
0.2
0
-0.2
-0.4
-0.6
1
2
2.5
3
2.5
3
Attenuation Accuracy, 8 dB
1.5
2
Fre que ncy (GHz )
2.5
3
D ev ia tio n fro m N o m . A tten.
(dB)
Deviation from Nom. Atten. (dB)
Attenuation Accuracy, 4 dB
0.5
1.5
Fre que ncy (GHz )
Fre que ncy (GHz )
0
1
0.4
0.2
0
-0.2
-0.4
0
0.5
1
1.5
2
Frequency (GHz)
3
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MAATCC0006
Digital Attenuator
30.0 dB, 4-Bit, TTL Driver, DC-3.0 GHz
Rev. V4
Typical Performance Curves
Attenuation Accuracy, 30 dB
0.8
0.4
0
-0.4
-0.8
0
0.5
1
1.5
2
2.5
3
Deviation from Nom. Atten. (dB)
Deviation from Nom. Atten. (dB)
Attenuation Accuracy, 16 dB
0.8
0.4
0
-0.4
-0.8
-1.2
-1.6
-2
-2.4
0
0.5
Fre que ncy (GHz )
Typical RF1 VSWR
1.5
2
2.5
3
Typical RF2 VSWR
16 d B
3 0 dB
2 , 4 , & 8 dB
I nser t i o n Lo ss
1.4
1.4
1.3
1.3
VSWR
VSWR
I nser t i o n Lo ss
1
Fre que ncy (GHz )
1.2
1.1
16 d B
3 0 dB
2 , 4 , & 8 dB
1.2
1.1
1
1
0
0.5
1
1.5
2
Fre que ncy (GHz )
2.5
3
0
0.5
1
1.5
2
2.5
3
Fre que ncy (GHz )
4
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MAATCC0006
Digital Attenuator
30.0 dB, 4-Bit, TTL Driver, DC-3.0 GHz
Rev. V4
Lead-Free, SOIC-16†
†
Reference Application Note M538 for lead-free solder reflow
recommendations.
5
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
Similar pages