ISDN SO Compact SMD Interface Modules Features • excellent output characteristics ensure compliance with CCITT.I.430 pulse waveform template when used with recommended IC pairing • SMD modules are designed for pick and place compatability • excellent and consistent balance between windings • modular design maximizes suppression effectivity and transmission properties • full compatibility with all common IC's • manufactured in ISO-9001:2000, TS-16949:2002 and ISO-14001:2001 certified Talema facility • fully RoHS compliant and meets lead free reflow level J-STD-020C • operating temperature: -40° to 85°C • storage temperature: -40 to +125°C Electrical Specifications @ 25°C Turns Ratio: Bold = IC side windings Compact SMD Modules comply with Basic Insulation Level EN60950, UL1950 and UL1459 Part Number LP (mH Min) Turns Ratio LL (µH Max) ^IDC (mA) CC (pF Max) RCUP (Ohms) RCUS (Ohms) VP (Vrms) Schematic 30 30 30 30 30 30 1:1:1: 1 1:1:2: 2 1:1:2.5: 2.5 1:1:1: 1 1:1:2: 2 1:1:2.5: 2.5 5 5 5 5 5 5 4 4 4 3 3 3 120 120 120 120 120 120 1.7 1.7 1.9 1.7 1.7 1.9 1.7 3.4 4.4 1.7 3.4 4.4 1500 1500 1500 1500 1500 1500 A A A A A A MAJ-400A-XXX MAJ-403A-XXX MAJ-405A-XXX MAJ-400A-XXX-3 MAJ-403A-XXX-3 MAJ-405A-XXX-3 C o mmo n Mo d e C h o k e Basic P/N + Suffix (Example: MAJ-403A-470 -000 -470 -101 -501 -502 RCU (Ohms) LN (µH) No Choke 47 0.5 100 0.7 500 0.5 5000 2.0 Test Conditions: Polarity and Turns Ratio: ±1% Inductance: 30mH minimum, line side windings in series @ 10kHz,100mV Leakage Inductance: Line side windings in series, IC side windings short circuited @ 100kHz, 100mV Coupling Capacitance: IC side windings in series to Line side windings in series @ 10kHz, 100mV Common Mode Choke Inductance: 100kHz, 20mV Test Voltage: 1.5kV for 2 Sec. - Line side windings in series to IC side windings in series Standard Packaging: Tape and Reel MAJ Compact Chip Module 0.044 (1.11) TALEMA IN WK/YR Part Number 7 x 0.100 (2,54) 0.787 (20.00) 0.100 (2.54) Schematic 0.047 (1.20) A Line 0° - 8° 0.551 0.472 (14.00) (13.00) Suggested Pad Layout 0.591 0.374 (15.00) (9.50) 0.700 (17.78) 0.354 0.307 (9.00) (7.80) 0.020 x 0.12 (0.50 x 0.30) IC 1 16 2 3 15 14 4 13 5 12 6 7 11 10 8 9 Surface Coplanarity will be 0.004(0.10) maximum Dimensions: Inches (Millimeters) Tolerance: ±0.010 (0.25) unless specified otherwise Germany: Int.+4989-841 00-0 • Ireland: Int.+35 374 - 954 8666 • Czech Rep: Int.+420 377 - 338 351 • India: Int.+91 427 - 244 1325 http://www.talema-nuvotem.com (10-06) Communications\MAJ