B130LB 1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER Features Schottky Barrier Chip Guard Ring Die Construction for Transient Protection Ideally Suited for Automatic Assembly Low Power Loss, High Efficiency Surge Overload Rating to 40A Peak For Use in Low Voltage, High Frequency Inverters, Free Wheeling, and Polarity Protection Application High Temperature Soldering: 260C/10 Second at Terminal Plastic Material: UL Flammability Classification Rating 94V-0 B A SMB C D J Mechanical Data H Case: SMB, Molded Plastic Terminals: Solder Plated Terminal Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band or Cathode Notch Weight: 0.093 grams (approx.) Marking: B13LB Maximum Ratings and Electrical Characteristics G E Dim Min Max A 3.30 3.94 B 4.06 4.57 C 1.96 2.21 D 0.15 0.31 E 5.00 5.59 G 0.10 0.20 H 0.76 1.52 J 2.00 2.62 All Dimensions in mm @ TA = 25C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Symbol B130LB Unit VRRM VRWM VR 30 V VR(RMS) 21 V IO 1.0 2.0 A IFSM 40 A @ IF = 1.0A @ IF = 2.0A VFM 0.395 0.445 V @ TA = 25C @ TA = 100C IRM 1.0 20 mA Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @ TT = 120C @ TT = 110C Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load (JEDEC Method) Forward Voltage Peak Reverse Current at Rated DC Blocking Voltage Typical Junction Capacitance (Note 1) Typical Thermal Resistance Junction to Terminal Operating and Storage Temperature Range Notes: Cj 90 pF RJT 12 K/W Tj, TSTG -55 to +125 C 1. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. DS30043 Rev. B-2 1 of 2 B130LB 10 IF, INSTANTANEOUS FWD CURRENT (A) IO, AVERAGE RECTIFIED CURRENT (A) 5 4 3 2 1 Tj = 125°C 0 0 25 50 75 100 125 Tj = 125°C Tj = 25°C 1.0 IF Pulse Width = 300µs 0.1 0 150 TC, CASE TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve 0.4 0.6 0.8 1.0 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 1000 50 Single Half-Sine-Wave (JEDEC Method) Cj, JUNCTION CAPACITANCE (pF) IFSM, PEAK FWD SURGE CURRENT (A) 0.2 40 30 20 10 f = 1.0MHz Tj = 25°C 100 10 0 1 10 0.1 100 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance NUMBER OF CYCLES AT 60Hz Fig. 3 Max Non-Repetitive Peak Fwd Surge Current IR, INSTANTANEOUS REVERSE CURRENT (A) 1 100 Tj = 100°C 10 1.0 Tj = 25°C 0.1 0.01 0 5 10 15 20 25 30 35 VR, RATED PEAK REVERSE VOLTAGE (V) Fig. 5 Typical Reverse Characteristics DS30043 Rev. B-2 2 of 2 B130LB