Rockers Toggles Series M2 A General Specifications Electrical Capacity (Resistive Load) Keylocks Programmable Illuminated PB Pushbuttons Power Level (silver): Logic Level (gold): Logic/Power Level: (gold over silver) Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Contact Timing: Angle of Throw: Accessories Indicators Touch Tilt Tactiles Slides Rotaries Materials & Finishes Supplement Process Sealed Miniature Toggles Toggle/Lever: Support Bracket: Bushing/Housing: Sealing Ring: Base: Movable Contacts: Stationary Contacts: Terminals: 6A @ 125V AC or 3A @ 250V AC; 4A @ 30V DC (On-On circuit) & 3A @ 30V DC (all other circuits) 0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Combines silver & gold ratings Note: Find additional explanation of dual rating & operating range in Supplement section. 10 milliohms maximum for silver; 20 milliohms maximum for gold 1,000 megohms minimum @ 500V DC 1,000V AC minimum between contacts for 1 minute minimum; 1,500V AC minimum between contacts & case for 1 minute minimum 100,000 operations minimum 25,000 operations minimum for silver; 50,000 operations minimum for gold Nonshorting (break-before-make) 26° Brass with nickel plating Brass with tin plating Glass fiber reinforced polyamide (UL94V-0) Nitrile butadiene rubber Glass fiber reinforced polyamide (UL94V-0) Silver alloy with silver plating (code W); copper or phosphor bronze with gold plating (code G); or silver alloy with gold plating (code A) Silver alloy with silver plating (code W); copper or brass with gold plating (code G); or silver alloy with gold plating (code A) Copper or brass with silver or gold plating Environmental Data Operating Temp Range: Humidity: Vibration: Shock: –30°C through +85°C (–22°F through +185°F) 90 ~ 95% humidity for 96 hours @ 40°C (104°F) 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) PCB Processing Soldering: Wave Soldering Recommended: See Profile B in Supplement section. Manual Soldering: See Profile B in Supplement section. Cleaning: Automated cleaning. See Cleaning specifications in Supplement section. Standards & Certifications Flammability Standards: UL94V-0 rated bushing/housing & base UL: File No. E44145 - Recognized only when ordered with marking on switch. Add “/U” or “/CUL” before first dash in part number to order UL recognized switch. All models recognized at 6A @ 125V AC, 3A @ 250V AC, & 4A @ 30V DC or 0.4A @ 28V DC. CSA: File No. 023535_0_000 - Certified only when ordered with marking on switch. Add “/C” to end of part number to order CSA certified switch. All models certified at 6A @ 125V AC, 3A @ 250V AC, & 4A @ 30V DC. A88 www.nkkswitches.com A Rockers Distinctive Characteristics Toggles Series M2 Process Sealed Miniature Toggles Pushbuttons Antijamming actuator design protects against mechanism damage from downward force on the toggle. Programmable Illuminated PB Single unit construction of the bushing and top of the housing gives protection from cleaning fluids or other liquids. Keylocks O-ring surrounding actuator at top of bushing interior prevents liquids from reaching switch mechanism. Rotaries Ultrasonic welding of upper and lower housing seals out contaminants and allows automated soldering and cleaning. Slides Terminals are epoxy sealed to prevent entry of flux, solvents, and other contaminants. Tilt Tactiles Bracketed models have crimped legs to ensure secure PC mounting and prevent dislodging during automated soldering. Touch Logic level and power capabilities are available to suit varying applications. Supplement Accessories Indicators Actual Size www.nkkswitches.com A89 Process Sealed Miniature Toggles A TYPICAL SWITCH ORDERING EXAMPLE M2T 1 2 S A5 G 03 Poles 1 SPDT 2 DPDT Bushing A5 Circuits PC Terminals .250” (6.35mm) Double Flatted Contact Materials & Ratings 2 ON NONE ON 3 ON OFF ON 5 ON NONE (ON) 8 (ON) OFF (ON) 9 ON OFF (ON) Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Toggles Series M2 W Silver; Rated 6A @ 125V AC & 3A @ 250V AC G Gold; Rated 0.4VA max @ 28V AC/DC max A Gold over Silver; Rated 6A @ 125V AC & 0.4VA max @ 28V AC/DC max ( ) = Momentary 03 Straight 13 Straight with .460” (11.7mm) Bracket 30 .150” (3.81mm) Right Angle 40 .150” (3.81mm) Vertical 05 .390” (9.9mm) Extended PC 06 .728” (18.5mm) Extended PC 07 .945” (24.0mm) Extended PC S .500” (12.7mm) Bat Lever (standard combination with code 03 straight terminals) S4 .300” (7.62mm) Bat Lever (standard combinations with codes 13, 30 & 40 bracketed terminals) Tactiles Slides Actuators IMPORTANT: Touch Tilt Switches are supplied without UL, cULus & CSA marking unless specified. UL, cULus & CSA recognized only when ordered with marking on the switch. Specific models, ratings & ordering instructions are noted on the General Specifications page. DESCRIPTION FOR TYPICAL ORDERING EXAMPLE Indicators M2T12SA5G03 Accessories .500” (12.7mm) Bat Lever .250” (6.35mm) Bushing with Double Flat Supplement Gold Contacts with 0.4VA Rating SPDT ON-NONE-ON Circuit Straight PC Terminals A90 www.nkkswitches.com A POLES & CIRCUITS Up Down Center Up M2T12 M2T13 M2T15 M2T18 M2T19 ON ON ON (ON) ON NONE OFF NONE OFF OFF ON ON (ON) (ON) (ON) 2-3 OPEN 2-1 M2T22 M2T23 M2T25 M2T28 M2T29 ON ON ON (ON) ON NONE OFF NONE OFF OFF ON ON (ON) (ON) (ON) 2-3 5-6 Terminal numbers are not actually on the switch. 2 (COM) SPDT 3 2 OPEN 2-1 5-4 DPDT 3 1 (COM) 1 Programmable Illuminated PB SP Note: Pushbuttons Center Model Rockers Throw & Schematics Down Pole DP Connected Terminals 5 6 4 .500” (12.7mm) Bat Lever Material: Nickel over Brass (2.8) Dia .110 S4 26° .300” (7.62mm) Bat Lever (2.7) Dia .106 (12.7) .500 Material: Nickel over Brass Standard Combinations: S Bat Lever with straight terminals (code 03) with silver or gold contacts. 26° Rotaries S Keylocks ACTUATORS (7.62) .300 Standard Combinations: S4 Bat Lever with bracketed terminals (codes 13, 30, 40) with silver or gold contacts. .250” (6.35mm) Double Flatted (6.8) .268 (6.2) .244 (5.2) .205 Tilt A5 Tactiles BUSHING (6.35) .250 Silver over Silver Power Level 6A @ 125V AC & 3A @ 250V AC G Gold over Brass or Copper Logic Level 0.4VA maximum @ 28V AC/DC maximum Indicators W Touch CONTACT MATERIALS & RATINGS Power Level or Logic Level 6A @ 125V AC or 0.4VA maximum @ 28V AC/DC maximum Supplement Gold over Silver Accessories Complete explanation of operating range in Supplement section. A Slides Toggle Position ( ) = Momentary Toggles Series M2 Process Sealed Miniature Toggles Note: This dual rated option is suitable when two or more identical switches are used in logic and in power circuits within the same application. See Supplement section for complete explanation of dual rating and operating range. www.nkkswitches.com A91 Process Sealed Miniature Toggles A PC TERMINALS 03 Rockers Toggles Series M2 (4.8) .189 Straight 3 (4.8) (5.9) .189 .232 Epoxy Seal 1 Pushbuttons Programmable Illuminated PB Single Pole Straight with .460” (11.7mm) Bracket (7.9) Typ .311 2 (4.7) Typ .185 1 (11.7) .460 1 4 Single Pole .150” (3.81mm) Right Angle Rotaries 3 2 (4.7) Typ .185 1 Double Pole (1.6) Typ .063 (2.4) Typ .095 3 6 2 5 1 4 CL Slides Tactiles 40 .150” (3.81mm) Vertical 6 5 4 3 2 1 Double Pole (3.81) Typ .150 4 A 2 (4.7) Typ .185 1 Thk = (0.8) .031 (3.81) Typ .150 (2.54) Typ .100 (1.8) Dia Typ .073 Tilt Touch Indicators Accessories Supplement 5 1 Double Pole (4.8) .189 .728” (18.5mm) Extended PC .945” (24.0mm) Extended PC 2 (2.4) Typ .094 (2.54) Typ .100 (1.8) Dia Typ .073 3 (1.27) .050 07 6 (12.7) .500 .390” (9.9mm) Extended PC Epoxy Seal 06 3 (12.7) .500 Single Pole 05 (3.81) .150 (2.54) Typ .100 (1.8) Dia Typ .073 1 (3.81) .150 (4.7) Typ .185 (12.7) .500 3 2 (4.7) Typ .185 Double Pole (1.8) Dia Typ .073 (2.54) Typ .100 Single Pole (7.9) Typ .311 (1.8) Dia Typ .073 (1.5) Dia Typ .059 (12.7) .500 (3.81) .150 (4.7) Typ .185 (1.8) Dia Typ .073 (1.8) Dia Typ .073 (1.5) Dia Typ .059 (5.9) .232 Keylocks 5 (1.6) Typ .063 3 30 6 2 (1.8) Dia Typ .073 (1.17) .046 Thk = (0.8) .031 13 (4.7) Typ .185 2 3 (1.8) Dia Typ .073 Single Pole 3 6 2 5 1 4 (4.7) Typ .185 (1.8) Dia Typ .073 Double Pole Dimension A = terminal lengths as shown beside the terminal codes at the left. A92 www.nkkswitches.com A TYPICAL SWITCH DIMENSIONS Straight PC Rockers Single Pole Toggles Series M2 Process Sealed Miniature Toggles 26° (4.8) .189 (9.4) .370 (21.6) .850 (1.17) .046 (6.6) .260 M2T12SA5G03 Actuator in Down Position Double Pole Straight PC (4.8) .189 NKK P/N This Side (6.2) .244 (4.7) Typ .185 26° (0.8) Typ .031 (2.8) Dia .110 (6.35) .250 (12.7) .500 (5.2) .205 (9.4) .370 (21.6) .850 Keylocks (6.35) .250 (12.7) .500 6 3 5 2 4 1 Rotaries (5.2) .205 1 (12.7) .500 (1.17) Typ .046 (4.8) .189 (11.5) .453 Slides (2.8) Dia .110 (12.7) .500 2 (0.8) Typ .031 Programmable Illuminated PB 3 (4.7) Typ .185 M2T22SA5G03 Actuator in Down Position Straight PC • Bracket Tilt Single & Double Pole Tactiles (6.2) .244 Pushbuttons NKK P/N This Side 26° (2.7) Dia .106 Touch (6.2) .244 (5.8) .228 NKK P/N This Side 2 3 (4.8) .189 (0.5) Typ .020 (0.8) Typ .031 (4.7) Typ .185 (4.7) Typ .185 (4.8) .189 (3.2) Typ .126 (1.17) Typ .046 (1.17) Typ .046 (15.75) .620 (8.0) .315 Accessories 1 Indicators (11.7) Typ .460 (11.5) .453 M2T12S4A5G13 Actuator in Down Position www.nkkswitches.com A93 Supplement (7.62) .300 Toggles Series M2 Process Sealed Miniature Toggles A TYPICAL SWITCH DIMENSIONS Single Pole Rockers Right Angle PC Pushbuttons NKK P/N This Side (2.7) Dia .106 1 2 3 Programmable Illuminated PB (5.2) .205 (6.6) .260 (1.3) Typ .051 (5.08) .200 (7.62) .300 M2T12S4A5G30 (6.15) .242 (0.4) .016 (12.7) .500 (1.27) .050 (4.7) Typ .185 (0.8) Typ .031 (12.7) .500 Actuator in Down Position Right Angle PC Double Pole NKK P/N This Side Rotaries Keylocks (6.2) .244 (6.2) .244 (2.7) Dia .106 4 5 6 (11.5) .453 (5.2) .205 Slides (0.5) .020 1 (1.3) Typ .051 (5.08) .200 (6.15) .242 (0.4) .016 (12.7) .500 (1.27) Typ .050 (3.81) .150 (4.7) Typ .185 (3.7) .146 3 (0.8) Typ .031 (12.7) .500 Tactiles (7.62) .300 2 Actuator in Down Position Vertical PC Single Pole Touch Tilt M2T22S4A5G30 (7.2) .283 NKK P/N This Side 3 Indicators (6.2) .244 Supplement Accessories (1.3) Typ .051 (5.08) .200 M2T12S4A5G40 A94 2 (1.0) .039 (0.5) .020 26° 1 (4.2) .165 (2.7) Dia .106 (7.62) .300 (6.15) .242 (0.4) .016 (12.7) .500 (0.8) Typ .031 (3.81) Typ .150 Actuator in Down Position www.nkkswitches.com (12.7) .500 (6.6) .260 (1.27) .050 (3.2) .126 A TYPICAL SWITCH DIMENSIONS (0.5) .020 (2.7) Dia .106 (1.3) Typ .051 (5.08) .200 (7.62) .300 (6.15) .242 (0.4) .016 (12.7) .500 3 5 2 4 1 (0.8) Typ .031 (3.81) Typ .150 Actuator in Down Position Pushbuttons (1.0) .039 26° 6 (12.7) .500 (4.2) .165 (11.5) .453 Programmable Illuminated PB (6.2) .244 (4.8) .189 NKK P/N This Side (1.27) Typ .050 M2T22S4A5G40 HANDLING PRECAUTION When an application employs M2T model with silver contacts, 5 to 6A @ 125V AC, and the switch will be actuated 100 or more times per day, note these instructions: Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Peel off the film seal on the switch body situated over the part number after cleaning. Keylocks (7.2) .283 Vertical PC Rockers Double Pole Toggles Series M2 Process Sealed Miniature Toggles www.nkkswitches.com A95