UNISONIC TECHNOLOGIES CO., LTD Preliminary BYC15-600 DIODE RECTIFIER DIODE, HYPERFAST DESCRIPTION The UTC BYC15-600 is a rectifier diode. It provides the designers with ultra-fast switching and low switching loss in associated MOSFET. The UTC BYC15-600 is suitable for half-bridge lighting ballasts, half-bridge/full-bridge switched mode power supplies and active power factor correction applications. FEATURES * Low Reverse Recovery Current * Ultra-Fast Switching * Low Switching Loss in associated MOSFET * Low Thermal Resistance SYMBOL ORDERING INFORMATION Ordering Number Package Lead Free Plating Halogen Free BYC15L-600-TA2-T BYC15G-600-TA2-T TO-220-2 Note: Pin Assignment: A: Anode, K: Cathode, Tab: Mounting Base www.unisonic.com.tw Copyright © 2010 Unisonic Technologies Co., Ltd Pin Assignment 1 2 Tab K A K Packing Tube 1 of 3 QW-R601-026.b BYC15-600 DIODE Preliminary ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL RATINGS UNIT Peak Repetitive Reverse Voltage VRRM 600 V Crest Working Reverse Voltage VRWM 600 V square-wave pulse;δ =1.0; VR Reverse Voltage 500 V TTab ≤100°C square-wave pulse;δ =0.5; IF(AV) Average Forward Current 15 A TTab ≤98°C Repetitive Peak Forward square-wave pulse; δ =0.5; IFRM 30 A Current tP = 25µs, TTab ≤98°C Non-Repetitive Peak tP=10ms,sine-wave pulse; 200 A IFSM Forward Current. tP=8.3ms,sine-wave pulse; 220 A Junction Temperature TJ 150 °C Storage Temperature TSTG -40 ~ +150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL DATA PARAMETER Junction to Ambient Junction to Tab SYMBOL θJA θJB RATINGS 60 1.5 UNIT K/W K/W ELECTRICAL CHARACTERISTICS (TJ =25°C, unless otherwise specified) PARAMETER SYMBOL Forward Voltage VF Reverse Current IR Reverse Recovery Time tRR Peak Reverse Recovery Current IRM Forward Recovery Voltage VFR TEST CONDITIONS IF =15A, TJ =150°C IF =30A, TJ =150°C IF =15A VR=600V VR=500V, TJ=100°C IF =1A, VR=30V, dIF/dt=50A/μs (Figure1) IF=15A,VR=400V,IF/dt=500A/μs TJ=25°C (Figure1) TJ=100°C IF=15A,VR=400V, TJ=125°C dIF/dt=50A/μs (Figure1) dIF/dt=500A/μs IF =15A, dIF/dt=100A/μs (Figure2) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP MAX UNIT 1.32 2.03 V 1.64 2.34 V 1.89 2.9 V 12 200 µA 1.1 3.0 mA 35 55 ns 19 ns 32 40 ns 3.0 7.5 A 9.5 12 A 8 11 V 2 of 3 QW-R601-026.b BYC15-600 Preliminary DIODE TYPICAL CHARACTERISTICS UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R601-026.b