PRODUCT DATASHEET Tina series last update 10/4/2017 DETAILS Product Number CA12377_TINA2-M Family Tina Type Assembly Color black Diameter 16 mm Height 9,5 mm Style round Optic Material PMMA Holder Material Fastening tape, pin Status production ready ROHS Comliant Yes Date Updated 10/04/2017 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency cd/lm Connector XB-H 31 deg Medium 85 % 2.700 - XQ-E 29 deg Medium 84 % 3.200 - LUXEON Z ES 31 deg Medium 88 % 3.200 - LUXEON TX 30 deg Medium 86 % 2.800 - LUXEON C sim: 30 Medium sim: 93 % sim: 2.900 - NWSx229A 26 deg Medium 86 % 2.200 - NVSxx19B/NVSxx19C 29 deg Medium 85 % 2.700 - Oslon Square PC 29 deg Medium 86 % 2.400 - Oslon SSL 80 31 deg Medium 84 % 2.280 - Oslon SSL 150 30 deg Medium 87 % 2.500 - SFH 4715S 28 deg Medium sim: 86 % - - Oslon Square EC 30 deg Medium 85 % 2.200 - SFH 4725S 27 deg Medium - - - Duris S5 (2 chip) sim: 29 Medium sim: 92 % sim: 2.980 - SFH 4770S sim: 27 Medium sim: 85 % sim: 3.200 - Synios P2720 1 mm sim: 27 Medium sim: 91 % sim: 3.560 - Synios P2720 1/4 mm sim: 28 Medium sim: 91 % sim: 3.140 - Synios P2720 1/2 mm sim: 29 Medium sim: 93 % sim: 3.370 - Oslon Black Flat sim: 28 Medium sim: 91 % sim: 3.500 - June 9th 2017 4:57 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1 Ledil Oy Salorankatu 10 24240 SALO, Finland http://www.ledil.com email: [email protected] FAX: +358-2-733 8001 Relative intensity of CA12377_TINA2-M_(XQ-E) 100% 75% 50% 25% 0% 30 25 20 15 10 5 0 -5 -10 -15 -20 -25 -30 Relative intensity of CA12377_TINA2-M-SFH4715S 100% 75% 50% 25% 0% 60 50 40 30 20 10 0 -10 -20 -30 -40 -50 -60 Relative intensity of CA12377_TINA2-M_(SFH4725S) 100% 75% 50% 25% 0% 60 50 40 30 20 10 0 -10 -20 -30 -40 -50 -60 A B C D 4 9.66 4 Bottom view Scale: 3:1 Isometric view Scale: 3:1 3 PU foam tape 0.4mm 1 3.54 . 16 3 3.54 2 Front view Scale: 3:1 Rear view Scale: 3:1 INDEX PART NO 1 2 C11418 Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: Up to 30mm class M, otherwise class C. According to DIN ISO 2768-2 Form and position: class L 1 THIRD ANGLE PROJECTION: This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy. TINA2-lens TINA2-XP-HLD-TAPE-BLK MATERIAL COLOUR PMMA PC black Ledil Oy Salorankatu 10 FIN 24240 SALO Finland DRAWING TITLE TINA2-XP-series assembly SIZE 1 PART NUMBER A4 SCALE D DESCRIPTION 2 3:1 WEIGHT 1,3 g SHEET A 1/1 NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value.