^Produeti, Una. 20 STERN AVE. SPRINGFIELD, NEW JERSEY 07081 U.S.A. TELEPHONE: (973) 376-2922 (212)227-6005 FAX: (973) 376-8960 D43C Series -30--80 VOLTS -3 AMP, 12.5 WATTS PNP POWER TRANSISTORS COMPLEMENTARY TO THE D42C SERIES CASE STYLE TO-202 Features: • High free-air power dissipation • • • • DIMENSIONS ARE IN INCHES AND (MILLIMETERS) |9 144-10 4 ' 4 i PNP complement to D42C NPN Low collector saturation voltage (0.5V typ. @ 3.0A lc) Excellent linearity Fast Switching 3405-0425 0025 (OMOi TYPE TERM 1 10-MJ EMITTER H O.OM-llOt !2.413-2«e*> TERM 2 COLLECTOR TE1M . 3 BASE TAB COLLECTOR maximum ratings (TA = 25° C) (unless otherwise specified) RATING Collector-Emitter Voltage Collector-Emitter Voltage Emitter Base Voltage Collector Current — Continuous Peakd) Base Current — Continuous Total Power Dissipation @ TA = 25° C @ Tc = 25°C Operating and Storage Junction Temperature Range 2.1 12.5 D43C4, 5, 6 -45 -55 -5 -3 -5 -2 2.1 12.5 D43C7, 8, 9 -60 -70 -5 -3 -5 -2 2.1 12.5 Tj.Tstg -55 to +150 -55 to +150 -55 to +150 -55 to +150 °C RWA RWC 60 10 60 10 60 10 60 10 °C/W °C/W TL +260 +260 +260 +260 °C SYMBOL VCEO VCES VEBO IG 'CM IB PD D43C1, 2, 3 -30 -40 -5 -3 -5 -2 D43C10, 11, 12 UNITS -80 Volts -90 Volts -5 Volts -3 A -5 A -2 2.1 Watts 12.5 thermal characteristics Thermal Resistance, Junction to Ambient Thermal Resistance, Junction to Case Maximum Lead Temperature for Soldering Purposes: %" from Case for 5 Seconds (1) Pulse Test Pulse Width = 300ms Duty Cycle < 2%. NJ Semi-Conductors reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by NJ Semi-Conductors is believed to be both accurate and reliable at the time of going to press. However, NJ Semi-Conductors assumes no responsibility for any errors or omissions discovered in its use. NJ Semi-Conductors encourages customers to verify that datasheets are current before placing orders. Quality Semi-Conductors electrical Characteristics (TC = 25° C) (unless otherwise specified) CHARACTERISTIC SYMBOL MIN TYP MAX UNIT -30 — — — — Volts -80 — — ICES — — -10 A/A IEBO — — -100 MA off characteristics^ Collector-Emitter Sustaining Voltage D43C1.2, 3 D43C4, 5, 6 D43C7, 8, 9 D43C10, 11, 12 (IC = 100mA) Collector Cutoff Current (VCE = Rated VCES) Emitter Cutoff Current (VEB = 5V) VCEO(SUS) -45 -60 second breakdown I Second Breakdown with Base Forward Biased FBSOA SEE FIGURE 3 on characteristics DC Current Gain (IC = -200mA, VCP = -1V) (IC = -1A,V C E = -1V) (IC = -2A, VCE = -1V) Collector-Emitter Saturation Voltage Oc = -1A, IB = -50mA) Oc = -1A, IB = -100mA) Base-Emitter Saturation Voltage (lc = -1A, IB = -100mA) • D43C1, 4, 7, 10 D43C2, 5, 8, 1 1 D43C3.6, 9, 12 D43C1.4, 7, 10 D43C2, 5, 8, 11 D43C3. 6, 9, 12 D43C2. 5, 8, 11 D43C3, 6, 9, 12 D43C1.4, 7. 10 hFE hFE VcE(sat) 25 40 40 10 20 20 120 120 " — — -0.5 -05 -05 Volts — — VcE(sat) Volts VBE(sat) — — -1.3 Volts CCBO — — 125 PF fj — 40 — MHz td + tr — 50 — nS — — 500 50 — — dynamic characteristics Collector Capacitance (VCB = -10V,f = 1MHz) Current-Gain — Bandwidth Product (IC = -20mA, VCE = -4V) switching characteristics Resistive Load Delay Time + Rise Time Storage Time Fall Time IG = -1A, IB1 = lea = -0-1A Vnr- " 3QV t_ = 9Z, ,i<iof (1) Pulse Test PW - 300ms Duty Cycle < 2%. ts tf |