HD74LVC1G08 2–input AND Gate REJ03D0009–0300Z Rev.3.00 Jun. 30, 2004 Description The HD74LVC1G08 has two–input AND gate in a 5-pin package. Low voltage and high-speed operation is suitable for the battery powered products (e.g., notebook computers), and the low power consumption extends the battery life. Features • The basic gate function is lined up as renesas uni logic series. • Supply voltage range : 1.65 to 5.5 V Operating temperature range: –40 to +85°C • All inputs: VIH (Max.) = 5.5 V (@VCC = 0 V to 5.5 V) All outputs: VO (Max.) = 5.5 V (@VCC = 0 V) • Output current: ±4 mA (@VCC = 1.65 V) ±8 mA (@VCC = 2.3 V) ±24 mA (@VCC = 3.0 V) ±32 mA (@VCC = 4.5 V) • Ordering Information Part Name HD74LVC1G08CPE Package Type WCSP-5 pin HD74LVC1G08CLE Package Code Package Abbreviation TBS-5V CP TBS-5AV CL Article Indication Marking Year code Month code E2YM Rev.3.00 Jun. 30, 2004 page 1 of 8 Taping Abbreviation (Quantity) E (3,000 pcs/reel) HD74LVC1G08 Function Table Inputs A Output Y B L L L H L L L H L H H H H: High level L: Low level Pin Arrangement 0.9 mm 3 INA 2 INB 1 4 OUTY 1.4 mm Height 0.5 mm 0.5 mm pitch 0.17 mm 5–Ball (CP) GND 0.23 mm 5–Ball (CL) 5 (Bottom view) Pin#1 INDEX VCC (Top view) Logic Diagram A B Rev.3.00 Jun. 30, 2004 page 2 of 8 Y HD74LVC1G08 Absolute Maximum Ratings Item Symbol Ratings Unit Supply voltage range VCC –0.5 to 6.5 V Input voltage range *1 VI –0.5 to 6.5 V VO –0.5 to VCC +0.5 V Output voltage range *1, 2 Test Conditions Output : H or L –0.5 to 6.5 VCC : OFF Input clamp current IIK –50 mA Output clamp current IOK –50 mA VO < 0 Continuous output current IO ±50 mA VO = 0 to VCC Continuous current through VCC or GND ICC or IGND ±100 mA Package Thermal impedance θja 154 °C/W 132 Storage temperature Notes: Tstg VI < 0 CP CL –65 to 150 °C The absolute maximum ratings are values, which must not individually be exceeded, and furthermore no two of which may be realized at the same time. 1. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed. 2. This value is limited to 5.5 V maximum. Recommended Operating Conditions Item Symbol Min Max Unit Conditions Supply voltage range VCC 1.65 5.5 V Input voltage range VI 0 5.5 V Output voltage range VO 0 VCC V Output current IOL — 4 mA — 8 VCC = 2.3 V — 16 VCC = 3.0 V — 24 — 32 VCC = 4.5 V — –4 VCC = 1.65 V — –8 VCC = 2.3 V — –16 VCC = 3.0 V — –24 — –32 0 20 0 10 0 5 –40 85 IOH Input transition rise or fall rate Operating free-air temperature ∆t / ∆v Ta Note: Unused or floating inputs must be held high or low. Rev.3.00 Jun. 30, 2004 page 3 of 8 VCC = 1.65 V VCC = 4.5 V ns / V VCC = 1.65 to 1.95 V, 2.3 to 2.7 V VCC = 3.0 to 3.6 V VCC = 4.5 to 5.5 V °C HD74LVC1G08 Electrical Characteristics Ta = –40 to 85°C Item Input voltage Symbol VIH VIL Output voltage VOH VCC (V) Typ Max 1.65 to 1.95 VCC×0.65 — — 2.3 to 2.7 1.7 — — 3.0 to 3.6 2.0 — — 4.5 to 5.5 VCC×0.7 — — 1.65 to 1.95 — — VCC×0.35 2.3 to 2.7 — 0.7 — 3.0 to 3.6 — — 0.8 4.5 to 5.5 — — VCC×0.3 Unit Test condition V IOH = –100 µA Min to Max VCC–0.1 — — 1.65 1.2 — — IOH = –4 mA 2.3 1.9 — — IOH = –8 mA 3.0 2.4 — — IOH = –16 mA 2.3 — — IOH = –24 mA 3.8 — — IOH = –32 mA 4.5 VOL Min V Min to Max — — 0.1 IOL = 100 µA 1.65 — — 0.45 IOL = 4 mA 2.3 — — 0.3 IOL = 8 mA 3.0 — — 0.4 IOL = 16 mA — — 0.55 IOL = 24 mA 4.5 — — 0.55 Input current IIN 0 to 5.5 — — ±5 µA VIN = 5.5 V or GND IOL = 32 mA Quiescent supply current ICC 5.5 — — 10 µA VIN = VCC or GND, IO = 0 ∆ICC 3 to 5.5 — — 500 Output leakage current IOFF 0 — — ±10 µA VIN or VO = 0 to 5.5 V Input capacitance CIN 3.3 — 4.0 — pF VIN = VCC or GND One input at VCC–0.6 V, Other input at VCC or GND Note: For conditions shown as Min or Max, use the appropriate values under recommended operating conditions. Rev.3.00 Jun. 30, 2004 page 4 of 8 HD74LVC1G08 Switching Characteristics VCC = 1.8 ± 0.15 V Ta = –40 to 85°C Item Propagation delay time Symbol tPLH tPHL Min Max 1.5 7.2 2.4 8.0 FROM Unit Test Conditions CL = 15 pF, RL = 1 MΩ ns (Input) A or B TO (Output) Y CL = 30 pF, RL = 1.0 kΩ VCC = 2.5 ± 0.2 V Ta = –40 to 85°C Item Propagation delay time Symbol tPLH tPHL Min Max 0.7 4.4 1.1 5.5 Unit Test Conditions CL = 15 pF, RL = 1 MΩ ns FROM TO (Input) (Output) A or B Y CL = 30 pF, RL = 500 Ω VCC = 3.3 ± 0.3 V Ta = –40 to 85°C Item Propagation delay time Symbol tPLH tPHL Min Max 0.8 3.6 1.0 4.5 Unit Test Conditions CL = 15 pF, RL = 1 MΩ ns FROM TO (Input) (Output) A or B Y CL = 50 pF, RL = 500 Ω VCC = 5.0 ± 0.5 V Ta = –40 to 85°C Item Propagation delay time Symbol tPLH tPHL Min Max 0.8 3.4 1.0 4.0 Unit Test Conditions ns CL = 15 pF, RL = 1 MΩ FROM TO (Input) (Output) A or B Y CL = 50 pF, RL = 500 Ω Operating Characteristics Ta = 25°C Item Power dissipation capacitance Symbol CPD Rev.3.00 Jun. 30, 2004 page 5 of 8 VCC (V) Min Typ Max 1.8 — 21 — 2.5 — 24 — 3.3 — 26 — 5.0 — 31 — Unit pF Test Conditions f = 10 MHz HD74LVC1G08 Test Circuit Measurement point From Output RL CL * Note: CL includes probe and jig capacitance. • Waveforms tr tf 90% Input VCC 90% Vref Vref 10% 10% GND VOH Vref Output Vref VOL t PLH t PHL INPUTS VCC (V) Vref CL RL ≤ 2 ns VCC / 2 15 pF 1 MΩ ≤ 2 ns VCC / 2 15 pF 1 MΩ 3 V ≤ 2.5 ns 1.5 V 15 pF 1 MΩ VCC ≤ 2.5 ns VCC / 2 15 pF 1 MΩ Vref CL RL VI tr / tf 1.8±0.15 VCC 2.5±0.2 VCC 3.3±0.3 5.0±0.5 INPUTS VCC (V) VI tr / tf 1.8±0.15 VCC ≤ 2 ns VCC / 2 30 pF 1.0 kΩ 2.5±0.2 VCC ≤ 2 ns VCC / 2 30 pF 500 Ω 3.3±0.3 3 V ≤ 2.5 ns 1.5 V 50 pF 500 Ω 5.0±0.5 VCC ≤ 2.5 ns VCC / 2 50 pF 500 Ω Notes: 1. Input waveform: PRR ≤ 10 MHz, Zo = 50 Ω. 2. The output are measured one at a time with one transition per measurement. Rev.3.00 Jun. 30, 2004 page 6 of 8 HD74LVC1G08 Package Dimensions TBS-5V EIAJ Package Code Mass (g) 0.001 JEDEC Code Lead Material D e ZD ZE C E B e B A 1 Pin #1 index area 2 A 5×φb // y1 C φxM C A B φxM C C A A2 A1 Seating plane y C Symbol A A1 A2 b D E e x y y1 ZD ZE Rev.3.00 Jun. 30, 2004 page 7 of 8 Dimension in Millimeters Min Typ Max 0.50 0.10 0.15 0.35 0.19 0.15 0.17 0.90 1.40 0.50 0.05 0.05 0.20 0.20 0.20 HD74LVC1G08 TBS-5AV EIAJ Package Code Mass (g) 0.001 JEDEC Code Lead Material D e ZD ZE C E B e B A 1 Pin #1 index area 2 A 5×φb // y1 C φxM C A B φxM C C *Reference value. Rev.3.00 Jun. 30, 2004 page 8 of 8 A A2 A1 Seating plane y C Symbol A A1 A2 b D E e x y y1 ZD ZE Dimension in Millimeters Min Nom Max 0.50 0.155 0.185 (0.315)* 0.20 0.25 0.90 1.40 0.50 0.05 0.05 0.20 0.20 0.20 Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Keep safety first in your circuit designs! 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein. http://www.renesas.com RENESAS SALES OFFICES Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500 Fax: <1> (408) 382-7501 Renesas Technology Europe Limited. Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, United Kingdom Tel: <44> (1628) 585 100, Fax: <44> (1628) 585 900 Renesas Technology Europe GmbH Dornacher Str. 3, D-85622 Feldkirchen, Germany Tel: <49> (89) 380 70 0, Fax: <49> (89) 929 30 11 Renesas Technology Hong Kong Ltd. 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2375-6836 Renesas Technology Taiwan Co., Ltd. FL 10, #99, Fu-Hsing N. Rd., Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology (Shanghai) Co., Ltd. 26/F., Ruijin Building, No.205 Maoming Road (S), Shanghai 200020, China Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952 Renesas Technology Singapore Pte. Ltd. 1, Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 © 2004. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .1.0