CB Series VG95351 and VG96934 Qualified Products About The VG Specifications Which VG Spec is Preferred? The German Federal Office of Defense Technology and Procurement (BWB) establishes procurement standards for defense items not covered by commercial specifications. VG standards are established by the Deutsches Institut für Normung (DIN). These standards are widely used in European and North American defense programs. Like their U.S. military specification counterparts, these VG specs require rigorous qualification testing in order to guarantee performance and interchangeability. VG96934 covers the ten pin connector and is the preferred version for new applications. Choose the 10 pin connector per VG96934 if shielding is a requirement, or printed circuit tail contacts are required, or if the connector should be furnished with a backshell. These options are not available on the 7 pin connector covered by VG95351. Both the seven pin and the ten pin connector share identical external dimensions. VG95351 does not have provisions for alternate key positions. If keyed connectors are necessary, then use VG96934 ten pin connectors, or instead specify the appropriate Glenair CB Series connector. VG 95351 SEVEN POLE CONNECTORS AND ACCESSORIES VG PART NUMBER GLENAIR PART NUMBER VG95351A7 CB07A1L0 VG95351B7 CB07B1L0 CONFIGURATION A B F C G E D VG95351B7 Connectors VG95351 and VG96934 Qualified Connectors DESCRIPTION PAGE Cable Plug For use with heatshrink boot Page 27 Flange Mount Receptacle for panel mounting Page 27 Panel cutout page 13 VG95351C7 CB07C1L0 Jam Nut Receptacle for rear panel mounting Page 27 Panel cutout page 13 VG95351D7 CB07D1L0 In-Line Receptacle for freehanging cables Page 28 VG95351E7 CB07E1L0 Thread-In Panel Mount Receptacle with PG9 thread Page 28 Panel cutout page 13 VG95351Z1 CBGK-B Elastomeric Gasket for use with Page 28 Style B flange mount receptacle VG95351Z2 CBOR-B O-Ring for use with Style B flange mount connector © 2008 Glenair, Inc. CAGE Code 06324 Page 28 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 26 E-Mail: [email protected] CB Series VG95351 STYLE A: PLUG 21.0 MAX 18.3 MAX 13º A B F G C E D VG95351 A7 7 pin cable plug with solder cup contacts. Knurled platform for attachment of heatshrink boot for watertight seal. Maximum weight 7 grams. VG Part Number Glenair Part no. VG95351A7 CB07A1L0 Ø 14.2 MAX Ø 18.0 MAX 120° 90° KNURL 10.0 MAX VG95351 STYLE B: FLANGE MOUNT RECEPTACLE B F C G E D A Ø 18.0 B F C G E VG95351 B7 D 25.0 ± 0.1 7 pin flange mount receptacle with solder cup contacts. Maximum weight 16 grams. VG Part Number VG95351B7 LOCATION OF POLARIZING CODE VG95351B7 A VG95351B7 Ø 3.7/3.3 THRU HOLE 2 PLCS 1.5 ± 0.15 DETAIL A RAD 3.5 Ø 12.8 MAX. Ø 13.5 MAX. 13 MAX. 32.0 MAX. 20.5 MAX. Glenair Part no. CB07B1L0 VG95351 STYLE C: JAM NUT MOUNT RECEPTACLE LOCATION OF POLARIZING CODE 20.6 MAX 16.2 MAX 3.0 MAX O-RING JAM NUT A B G F 13.3 MAX FLATS C E D Ø 17.0 MAX VG95351 C7 2.0 7 pin jam nut mount receptacle with solder cup contacts. Maximum weight 13 grams. VG Part Number VG95351C7 © 2008 Glenair, Inc. M14 x 0.75 WASHER 3.0 MAX PANEL Glenair Part no. CB07C1L0 CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 27 E-Mail: [email protected] Connectors VG95351 and VG96934 Qualified Connectors CB Series Connectors VG95351 and VG96934 Qualified Connectors VG95351 STYLE D: IN-LINE RECEPTACLE 24.2 MAX 15.5 MAX A Shown with heatshrink boot purchased separately.. B G F C E VG95351 D7 18.0 MAX 14.2 MAX D 7 pin in-line receptacle with solder cup contacts. Maximum weight 16 grams. VG Part Number VG95351D7 DETAIL A KNURL Glenair Part no. CB07D1L0 VG95351 STYLE E: THREADED-IN PANEL MOUNT RECEPTACLE LOCATION OF POLARIZING CODE A C G . Ø 18.0 MAX. VG Part Number VG95351E7 PG 9 THREAD I.A.W. DIN 40430 Ø 13.5 MAX. D VG95351 E7 7 pin panel mount receptacle with PG9 thread and solder cup pins. Maximum weight 16 grams. 2.0 B F E 4.0 14.2 MAX. 17.0 21.9 MAX. Glenair Part no. CB07E1L0 VG95351 STYLE Z1: GASKET VG95351 STYLE Z2: O-RING Ø 3.1 Ø 18.0 MAX. 32.0 MAX. 10.7 I.D. x 1.8 . VG95351 Z1 . VG95351 Z2 Gasket for use with VG95351 Style B connector. Nitrile rubber. Maximum weight 3 grams. O-ring for use with VG95351 Style B connector. Nitrile rubber. Maximum weight 2 grams. VG Part Number VG95351Z1 VG Part Number VG95351Z2 © 2008 Glenair, Inc. Glenair Part no. CBGK-B CAGE Code 06324 Glenair Part no. CBOR-B Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 28 E-Mail: [email protected]