FSUSB20 — Low-Power, 1-Port, High-Speed USB (480Mbps) Switch Features -30dB Off Isolation: 250MHz -30dB Non-adjacent Channel Crosstalk: 250MHz On Resistance: 4.5Ω Typical (RON) -3dB Bandwidth: >720MHz Low-Power Consumption: 1µA Maximum Control Input: LVTTL Compatible Bi-Directional Operation USB High-Speed and Full-Speed Signaling Description FSUSB20 is a low-power, high-bandwidth switch specially designed for switching high-speed USB 2.0 signals in handset and consumer applications; such as cell phone, digital camera, and notebook with hubs or controllers of limited USB I/O. The wide bandwidth (>720MHz) allows signals to pass with minimum edge and phase distortion. Superior channel-to-channel crosstalk results in minimal interference. It is compatible with the high-speed USB 2.0 standard. . Capability Applications Cell Phones, PDAs, Digital Cameras, Notebook Computers Ordering Information Operating Part Number Temperature Range Package FSUSB20L10X -40 to +85°C 10-Lead MicroPak™, 1.6 x 2.1mm FSUSB20BQX -40 to +85°C 14-Terminal Depopulation Quad Very-Thin Flat Pack No Lead (DQFN), JEDEC MO-241, 2.5 X 3.0mm -40 to +85°C 10-Lead Molded Small Outline Package (MSOP), JEDEC MO-187, 3.0mm Wide FSUSB20MUX ©2005 Fairchild Semiconductor Corporation FSUSB20 • Rev. 1.0.3 Packing Method Tape and Reel Tube Tape and Reel www.fairchildsemi.com FSUSB20 — Low-Power, 1-Port, High-Speed USB 2.0 (480Mbps) Switch April 2012 Figure 1. MicroPak™ (Top View) Figure 2. Figure 3. DQFN (Top Through View) Analog Symbol Figure 4. MSOP (Top Through View) Pin Descriptions Pin # MicroPak™ / MSOP Pin # DQFN Pin Names Description 1 2 S Select Input 2, 3, 7, 8 3, 5, 10, 12 1B1, 1B2, 2B2, 2B1 Bus B 5 7 GND Ground 4, 6 6, 9 1A, 2A Bus A 9 12 OE Bus Switch Enable 10 14 VCC Supply Voltage FSUSB20 — Low-Power, 1-Port, High-Speed USB 2.0 (480Mbps) Switch Connection Diagrams Truth Table S OE Function Don’t Care HIGH Disconnect LOW LOW A=B1 HIGH LOW A=B2 © 2005 Fairchild Semiconductor Corporation FSUSB20 • Rev. 1.0.3 www.fairchildsemi.com 2 Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Parameter Min. Max. Unit -0.5 4.6 V VCC Supply Voltage VS DC Switch Voltage -0.5 VCC + 0.05 V VIN (1) DC Input Voltage -0.5 4.6 V IIK DC Input Diode Current, VIN<0V -50 mA DC Output Sink Current 50 mA ±100 mA IOUT ICC / IGND TSTG ESD DC VCC / GND Current Storage Temperature Range Human Body Model, JESD22-A114 -65 All Pins 7000 I/O to GND 7000 +150 °C V Note: 1. The input and output negative voltage ratings may be exceeded if the input and output diode current ratings are observed. Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to Absolute Maximum Ratings. Symbol Parameter Min. Max. Unit 3.0 3.6 V VCC Power Supply Operating VIN Input Voltage 0 VCC V Output Voltage 0 VCC V 0 5 0 DC -40 +85 VOUT Switch Control Input tr, tf Input Rise and Fall Time TA Operating Temperature, Free Air (2) Switch I/O ns/V FSUSB20 — Low-Power, 1-Port, High-Speed USB 2.0 (480Mbps) Switch Absolute Maximum Ratings °C Note: 2. Unused control inputs must be held HIGH or LOW. They may not float. © 2005 Fairchild Semiconductor Corporation FSUSB20 • Rev. 1.0.3 www.fairchildsemi.com 3 Typical values are at VCC = 3.0V and TA = 25°C. Symbol VIK Parameter Clamp Diode Voltage Condition IIN = -18mA VCC (V) TA=-40 to +85°C Min. Typ. 3.0 Max. Unit -1.2 V VIH High-Level Input Voltage 3.0 to 3.6 VIL Low-Level Input Voltage 3.0 to 3.6 2.0 0.8 V V IIN Input Leakage Current 0 ≤ VIN ≤ 3.6V 3.6 ±1.0 µA IOFF Off-State Leakage Current 0 ≤ A, B ≤ VCC 3.6 ±1.0 µA RON Switch On Resistance(3) VIN = 0.8V, ION = 8mA 3.0 5 7 VIN = 3.0V, ION = 8mA 3.0 4.5 6.5 Delta RON VIN = 0.8V, VIN = 0V - 1.5V, ION = 8mA 3.0 0.3 Ω RFLAT(ON) On Resistance Flatness(4) IOUT = 8mA 3.0 1 Ω ICC Quiescent Supply Current VIN = VCC or GND, IOUT = 0 3.6 ΔRON 1 µA Notes: 3. Measured by the voltage drop between the A and B pins at the indicated current through the switch. On resistance is determined by the lower of the voltages on the A or B pins. 4. Flatness is defines as the difference between the maximum and the minimum value on resistance over the specified range of conditions. © 2005 Fairchild Semiconductor Corporation FSUSB20 • Rev. 1.0.3 Ω FSUSB20 — Low-Power, 1-Port, High-Speed USB 2.0 (480Mbps) Switch DC Electrical Characteristics www.fairchildsemi.com 4 Typical values are at VCC = 3.3V and TA = 25°C. Symbol Parameter Condition VCC(V) Typ. Max. Unit Figure tON Turn-On Time S-to-Bus B VB = 0.8V 3.0 to 3.6 4.8 7.0 ns Figure 9 Figure 10 tOFF Turn-Off Time S-to-Bus B VB = 0.8V 3.0 to 3.6 2.2 4.0 ns Figure 9 Figure 10 tPD Propagation Delay CL = 10pF 3.0 to 3.6 0.25 ns Figure 14 OIRR Non-Adjacent Off Isolation f = 250MHz, RL = 50Ω 3.0 to 3.6 -26 dB Figure 11 XTALK Non-Adjacent Channel Crosstalk f = 250MHz, RL = 50Ω 3.0 to 3.6 -45 dB Figure 12 MHz Figure 13 BW RL = 50Ω, CL = 0pF -3dB Bandwidth 3.0 to 3.6 RL = 50Ω, CL = 5pF 750 435 USB Related AC Electrical Characteristics Typical values are at VCC = 3.3V and TA = 25°C. Symbol Parameter Condition VCC (V) Typ. Unit Figure tSK(O) Channel-to Channel Skew CL = 10pF 3.0 to 3.6 0.051 ns Figure 14 Figure 16 tSK(P) Skew of Opposite Transition of the Same Output CL = 10pF 3.0 to 3.6 0.020 ns Figure 14 Figure 16 Total Jitter RL = 50Ω, CL = 10pF tR = tF = 750ps at 480MPs 3.0 to 3.6 0.170 ns TJ FSUSB20 — Low-Power, 1-Port, High-Speed USB 2.0 (480Mbps) Switch AC Electrical Characteristics Capacitance Typical values are at VCC = 3.3V and TA = 25°C. Symbol Parameter Condition Typ. Unit CIN Control Pin Input Capacitance VCC = 0V 2.5 pF CON A/B On Capacitance VCC = 3.3V, /OE = 0V 12.0 pF COFF Port B Off Capacitance VCC and /OE = 3.3V 4.5 pF © 2005 Fairchild Semiconductor Corporation FSUSB20 • Rev. 1.0.3 www.fairchildsemi.com 5 Freqency Response 0 Freqency Response -1 -3 Off Isolation (dB) Gain (dB) -2 -4 -5 -6 -7 -8 1 10 100 1000 10000 0 -10 -20 -30 -40 -50 -60 -70 -80 -90 -100 -110 -120 1 10 Frequency (MHz) CL = 0pF, VCC = 3.3V Figure 5. Gain vs. Frequency Figure 6. Off Isolation 10.0 9.0 8.0 85°C VB2 = 800.000mV RON = 5.402 7.0 RON (Ohms) Crosstalk (dB) 1000 VBIAS = 0.5V, V CC = 3.3V Freqency Response 0 -10 -20 -30 -40 -50 -60 -70 -80 -90 -100 -110 -120 100 Frequency (MHz) 6.0 5.0 4.0 3.0 2.0 1 10 100 1.0 1000 0.0 0.00 Frequency (MHz) VBIAS = 0.5V, V CC = 3.3V 0.50 1.00 1.50 2.00 VB2 (V) Figure 7. Crosstalk © 2005 Fairchild Semiconductor Corporation FSUSB20 • Rev. 1.0.3 25°C VB2 = 800.000mV RON = 4.437 -40°C VB2 = 800.000mV RON = 3.561 Figure 8. RON 2.50 3.00 FSUSB20 — Low-Power, 1-Port, High-Speed USB 2.0 (480Mbps) Switch Performance Characteristics www.fairchildsemi.com 6 FSUSB20 — Low-Power, 1-Port, High-Speed USB 2.0 (480Mbps) Switch AC Loadings and Waveforms A nB1 nB2 10pF 50Ω + VB Control – GND GND S OE Notes: Input driven by 50Ω source terminated in 50Ω. CL includes load and stray capacitance. Input PRR-1.0MHz, tW = 500ns. Figure 9. AC Test Circuit tr = 2.5ns 90% SELECT INPUT tf = 2.5ns 3.0V 90% 1.5V 1.5V 10% 10% tON GND tOFF 90% 90% VOH OUTPUT VOL Figure 10. AC Waveforms B1 B1 A Network Analyzer 50Ω A 100Ω 100Ω 50Ω B2 Network Analyzer S 50Ω Control S OE OE Figure 11. Off Isolation Test © 2005 Fairchild Semiconductor Corporation FSUSB20 • Rev. 1.0.3 Control Figure 12. Crosstalk Test www.fairchildsemi.com 7 A B Network Analyzer 50Ω S Control GND OE Figure 13. Bandwidth Test 800mV Input 400mV tPLH tPHL VOH Output VOL Figure 14. Propagation Delay 800mV 50% 50% Input 400mV 0 tPHL tPLH VOH 50% 50% FSUSB20 — Low-Power, 1-Port, High-Speed USB 2.0 (480Mbps) Switch AC Loadings and Waveforms Output VOL tSK(P) = | tPHL - tPHL | Figure 15. Pulse Skew tSP(P) 800mV 50% 50% Input 400mV tPHL1 tPLH1 0 50% 50% Output 1 tSK(O) tSK(O) 50% 50% Output 2 tPHL2 tPLH2 tSK(O) = | tPLH1 - tPLH2 | or | tPHL1 - tPHL2 | Figure 16. Output Skew tSK(O) © 2005 Fairchild Semiconductor Corporation FSUSB20 • Rev. 1.0.3 www.fairchildsemi.com 8 0.10 C 2.10 2X A 1.62 B KEEPOUT ZONE, NO TRACES OR VIAS ALLOWED (0.11) 0.56 1.12 1.60 PIN1 IDENT IS 2X LONGER THAN OTHER LINES 0.10 C 2X TOP VIEW (0.35) 10X (0.25) 10X 0.50 RECOMMENDED LAND PATTERN 0.55 MAX 0.05 C 0.05 C 0.05 0.00 C (0.20) 0.35 0.25 SIDE VIEW (0.15) D 0.65 0.55 DETAIL A 0.35 0.25 (0.36) 1 0.35 0.25 DETAIL A 2X SCALE 4 0.56 10 5 (0.29) 0.35 9X 0.25 6 9 0.50 0.25 9X 0.15 1.62 0.10 0.05 C A B C ALL FEATURES BOTTOM VIEW NOTES: A. PACKAGE CONFORMS TO JEDEC REGISTRATION MO-255, VARIATION UABD . B. DIMENSIONS ARE IN MILLIMETERS. C. DIMENSIONS AND TOLERANCES PER ASME Y14.5M, 1994. D. PRESENCE OF CENTER PAD IS PACKAGE SUPPLIER DEPENDENT. IF PRESENT IT IS NOT INTENDED TO BE SOLDERED AND HAS A BLACK OXIDE FINISH. E. DRAWING FILENAME: MKT-MAC10Arev5. FSUSB20 — Low-Power, 1-Port, High-Speed USB 2.0 (480Mbps) Switch Physical Dimensions Figure 17. 10-Lead MicroPak™, 1.6 x 2.1mm Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ For current tape and reel specifications, visit Fairchild Semiconductor’s online packaging area: http://www.fairchildsemi.com/products/logic/pdf/micropak_tr.pdf. © 2005 Fairchild Semiconductor Corporation FSUSB20 • Rev. 1.0.3 www.fairchildsemi.com 9 FSUSB20 — Low-Power, 1-Port, High-Speed USB 2.0 (480Mbps) Switch Physical Dimensions Figure 18. 14-Terminal Depopulation Quad Very-Thin Flat Pack No Lead (DQFN), JEDEC MO-241, 2.5 X 3.0mm Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ For current tape and reel specifications, visit Fairchild Semiconductor’s online packaging area: http://www.fairchildsemi.com/ms/MS/MS-522.pdf. © 2005 Fairchild Semiconductor Corporation FSUSB20 • Rev. 1.0.3 www.fairchildsemi.com 10 FSUSB20 — Low-Power, 1-Port, High-Speed USB 2.0 (480Mbps) Switch Physical Dimensions Figure 19. 10-Lead Molded Small Outline Package (MSOP), JEDEC MO-187, 3.0mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ For current tape and reel specifications, visit Fairchild Semiconductor’s online packaging area: http://www.fairchildsemi.com/products/analog/pdf/msop10_tr.pdf © 2005 Fairchild Semiconductor Corporation FSUSB20 • Rev. 1.0.3 www.fairchildsemi.com 11 FSUSB20 — Low-Power, 1-Port, High-Speed USB 2.0 (480Mbps) Switch © 2005 Fairchild Semiconductor Corporation FSUSB20 • Rev. 1.0.3 www.fairchildsemi.com 12