Media Converters Repeaters and Optimizers Datasheet FD T1 and E1 Fiber Modems Features Fiber converter for T1 (ANSI T1.403) or E1 (G.703) Built-in elastic buffer to remove jitter 6 LED indicators to help troubleshooting AMI/B8ZS/HDB3 line code support Up to 100 km transmission on single-mode or 10 km on multi-mode fiber Local and remote loopback test Hot-swap support SNMP management Fiber Driver chassis compatibility Overview The Fiber Driver® family of EM316T1 and EM316E1 modules are designed to extend the distance and transmission reliability of T1 (1.544Mbps) or E1 (2.048Mbps) traffic. These units convert electrical signals to optical signals, and transmit them up to 10 km on multi-mode fiber or up to 100 km on single-mode fiber. The EM316T1 and EM316E1 are transparent to the framing format, and they support AMI or B8ZS (T1) and HDB3 (E1) line codes, respectively. They include an internal elastic buffer to remove jitter from the transmitted data and six LED indicators to aid in managing the module. A management agent is incorporated on the module for remote administration from the Fiber Driver Network Management Module (NMM). As part of the Fiber Driver family, the EM316T1 and EM316E1 modules fit in all Fiber Driver chassis types, support local and remote loopback tests, and may connect to any T1 or E1 device including PBXs, multiplexers, video CODECS, routers, network servers, and ATM/ frame relay switches. Module benefits include extended distances, improved quality of transmission, better security, remote management capability, and high density. For additional information including pricing and availability, contact your MRV Communications sales representative today. 0UBLIC .ETWORK 0"8 #35 [email protected] Media Converters Repeaters and Optimizers Physical Specifications Operating Temperature Range 00C to 500C (320F to 1220F) Storage Temperature -400C to 700C (-400F to 1580F) Relative Humidity 85% maximum, non-condensing Physical Dimensions 25 mm x 75 mm x 175 mm deep (1” x 3” x 7” deep) Weight 120-240 g (4.2 - 8.5 oz) depending on configuration Regulatory Compliance FCC Part 15 (Class A); IC (Class A); EMC Directive: Emission (Class A) and Immunity; RoHS Directive; China RoHS; WEEE Directive T1 Electric Interface E1 Electric Interface Transmission Rate: 1.544Mbps Transmission Rate: 2.048Mbps Line Code: Supports both AMI and B8ZS Line Code: HDB3 DS-1 Signal: Conforms to ANSI T1.403 E1 Signal: Conforms to ITU-T G.703 Connector: RJ-48 Connector: BNC or RJ-45 Line Impedance: 100 Ohm Line Impedance: Default setting: 75 Ohm for unbalanced coax (Selectable to 120 Ohm for RJ-45) LEDs: Power, Transmit, Receive, Fiber Signal Detect, Loss of Copper Signal, Alarm Ordering Information Model Function Protocol Port Connectors¹ Link Connector¹ Wavelength (nm) Min. Budget Loss (dB) Approx. Range² (km) EM316T1/M T1 copper to MM fiber T1 RJ-48/RJ-45 ST 820 DL³ 0-4 EM316T1/MX T1 copper to Extended MM fiber T1 RJ-48/RJ-45 ST 1310 DL³ 4 - 10 EM316T1/S1 T1 copper to SM fiber T1 RJ-48/RJ-45 ST 1310 15 5 - 30 EM316T1/S2 T1 copper to SM fiber T1 RJ-48/RJ-45 ST 1310 25 25 - 50 EM316T1/S3 T1 copper to SM fiber T1 RJ-48/RJ-45 ST 1550 25 50 - 100 EM316E1/M E1 copper to MM fiber E1 Coax - BNC ST 820 DL³ 0-4 EM316E1/MX E1 copper to Extended MM fiber E1 Coax - BNC ST 1310 DL³ 4 - 10 EM316E1/S1 E1 copper to SM fiber E1 Coax - BNC ST 1310 15 5 - 30 EM316E1/S2 E1 copper to SM fiber E1 Coax - BNC ST 1310 25 25 - 50 EM316E1/S3 E1 copper to SM fiber E1 Coax - BNC ST 1550 25 50 - 100 EM316E1RJ/M E1 copper to MM fiber E1 RJ-45 ST 820 DL³ 0-4 EM316E1RJ/S1 E1 copper to SM fiber E1 RJ-45 ST 1310 15 5 - 30 EM316E1RJ/S2 E1 copper to SM fiber E1 RJ-45 ST 1550 25 25 - 50 EM316E1RJ/S3 E1 copper to SM fiber E1 RJ-45 ST 1550 25 50 - 10 ¹ Default connectors listed, other connectors are optional. ² Distances are approximate and assume 9µ Singlemode and 62.5µ Multimode. ³ Dispersion Limited MRV has more than 50 offices throughout the world. Addresses, phone numbers, and fax numbers are listed at www.mrv.com. Please e-mail us at [email protected] or call us for assistance. MRV (West Coast USA) 20415 Nordhoff St. Chatsworth, CA 91311 800-338-5316 818-773-0900 MRV (East Coast USA) 295 Foster St. Littleton, MA 01460 800-338-5316 978-952-4700 MRV (International) Business Park Moerfelden Waldeckerstrasse 13 64546 Moerfelden-Walldorf Germany Tel. (49) 6105/2070 Fax. (49) 6105/207-100 All statements, technical information and recommendations related to the products herein are based upon information believed to be reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. Please contact MRV Communications for more information. MRV Communications and the MRV Communications logo are trademarks of MRV Communications, Inc. Other trademarks are the property of their respective holders. MRV-FD-T1E1FM-050307 1398025-001 Rev. A1 Copyright ©2007 MRV Communications, Inc. All Rights Reserved.