Z-Power LED X10490 Technical Data Sheet AX32X1 AX32X1 Features Acriche series is designed for AC source operation and high flux output applications. 사진 Acriche is a semi-permanent and environmental friendly semiconductor lighting that can be used in AC without additional device. Acriche's thermal management perform exceeds other power LED solutions. It incorporates state of the art SMD design and Thermal emission material. Acriche is ideal light sources for general illumination Applications. • Connect directly in AC power • Power Saving • Long Life Time • Simple BOM • Miniaturization • Low thermal resistance • SMT solderbility • Lead Free product • RoHS compliant Applications • Architectural lighting • Task lighting • Decorative / Pathway lighting • Household appliances * The appearance and specifications of the product can be changed for improvement without notice. Rev. 03 1 May 2008 www.ZLED.com Z-Power LED X10490 Technical Data Sheet Part number of AX32X1 1. Part Number form : A X1 X2 X3 X4 X5 X1 Color W Pure White N Warm White X2 Acriche Series 1 - 2 - 3 A3 X3 LENS Type 2 Dome Type X4 Operating Voltage [V] 0 100 1 110 2 220 3 230 X5 PCB Type 0 - 1 4W PCB 2. Part Number of AX32X0 Part number Operating voltage Operating current AW3200 / AN3200 100V/110V [RMS] 40mA [RMS] AW3220 / AN3220 220V/230V [RMS] 20mA [RMS] Rev. 03 2 May 2008 www.ZLED.com Z-Power LED X10490 Technical Data Sheet Outline dimensions 1. AX3201/AX3211 2. AX3221/AX3231 Notes : [1] [2] [3] [4] [5] 3 All dimensions are in millimeters. (tolerance : ±0.2 ) Scale : none This drawing without tolerances are for reference only Slug of package isn’t connected to anode or cathode NC pin isn’t connected to electrode Rev. 03 May 2008 www.ZLED.com Z-Power LED X10490 Technical Data Sheet Characteristics of Acriche 1. AW3201/AW3211 1-1 Electro-Optical characteristics at 100V/110V Ta=25ºC Parameter Symbol Value Unit Min Typ Max ФV [2] - 195 - lm Фl - 220 - lx CCT - 6300 - K CRI Ra - 70 - - Operating Current Iopt - 40 - mA [RMS] Power Dissipation PD 4 W Operating Frequency Freq 50 / 60 Hz View Angle 2Θ 1/2 110 deg. Luminous Flux Illuminance [1] [3] Correlated Color Temperature [4] 1-2 Absolute Maximum Ratings Parameter Symbol Value Unit Operating Voltage vopt [5] 115/127 V [RMS] Power Dissipation PD 7.5 W Junction Temperature Tj 125 ºC Operating Temperature Topr -30 ~ +85 ºC Storage Temperature Tstg -40 ~ +120 ºC ESD Sensitivity - ±2,000V HBM - *Notes : [1] Acriche series maintains a tolerance of ±10% on flux and power measurements. [2] ФV is the total luminous flux output as measured with an integrated sphere. [3] Illuminance is measured at 50cm distance [4] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. CCT ±5% tester tolerance [5] ‘Operating Voltage' doesn't indicate the maximum voltage which customers use, but it means tolerable voltage according to the voltage variation rate by one's country. It is recommended that the temperature of lead frame should be below 70 ℃. Rev. 03 4 May 2008 www.ZLED.com Z-Power LED X10490 Technical Data Sheet Characteristics of Acriche 2. AN3201/AN3211 (CRI 70) 2-1 Electro-Optical characteristics at 100V/110V Ta=25ºC Parameter Symbol Value Unit Min Typ Max ФV [2] - 150 - lm Фl - 170 - lx CCT - 3000 - K CRI Ra - 70 - - Operating Current Iopt - 40 - mA [RMS] Power Dissipation PD 4 W Operating Frequency Freq 50 / 60 Hz View Angle 2Θ 1/2 110 deg. Luminous Flux Illuminance [1] [3] Correlated Color Temperature [4] 2-2 Absolute Maximum Ratings Parameter Operating Voltage Symbol vopt [5] Value Unit 115/127 V [RMS] Power Dissipation PD 7.5 W Junction Temperature Tj 125 ºC Operating Temperature Topr -30 ~ +85 ºC Storage Temperature Tstg -40 ~ +120 ºC ESD Sensitivity - ±2,000V HBM - *Notes : [1] Acriche series maintains a tolerance of ±10% on flux and power measurements. [2] ФV is the total luminous flux output as measured with an integrated sphere. [3] Illuminance is measured at 50cm distance [4] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. CCT ±5% tester tolerance [5] ‘Operating Voltage' doesn't indicate the maximum voltage which customers use, but it means tolerable voltage according to the voltage variation rate by one's country. It is recommended that the temperature of lead frame should be below 70 ℃. Rev. 03 5 May 2008 www.ZLED.com Z-Power LED X10490 Technical Data Sheet Characteristics of Acriche 3. AW3221/AW3231 3-1 Electro-Optical characteristics at 220V/230V Ta=25ºC Parameter Symbol Value Unit Min Typ Max ФV [2] - 195 - lm Фl - 220 - lx CCT - 6300 - K CRI Ra - 70 - - Operating Current Iopt - 20 - mA [RMS] Power Dissipation PD 4 W Operating Frequency Freq 50 / 60 Hz View Angle 2Θ 1/2 110 deg. Luminous Flux Illuminance [1] [3] Correlated Color Temperature [4] 3-2 Absolute Maximum Ratings Parameter Operating Voltage Symbol vopt [5] Value Unit 253/265 V [RMS] Power Dissipation PD 7.5 W Junction Temperature Tj 125 ºC Operating Temperature Topr -30 ~ +85 ºC Storage Temperature Tstg -40 ~ +120 ºC ESD Sensitivity - ±2,000V HBM - *Notes : [1] Acriche series maintains a tolerance of ±10% on flux and power measurements. [2] ФV is the total luminous flux output as measured with an integrated sphere. [3] Illuminance is measured at 50cm distance [4] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. CCT ±5% tester tolerance [5] ‘Operating Voltage' doesn't indicate the maximum voltage which customers use, but it means tolerable voltage according to the voltage variation rate by one's country. It is recommended that the temperature of lead frame should be below 70 ℃. Rev. 03 6 May 2008 www.ZLED.com Z-Power LED X10490 Technical Data Sheet Characteristics of Acriche 4. AN3221/AN3231 (CRI 70) 4-1 Electro-Optical characteristics at 220V/230V Ta=25ºC Parameter Symbol Value Unit Min Typ Max ФV [2] - 150 - lm Фl - 170 - lx CCT - 3000 - K CRI Ra - 70 - - Operating Current Iopt - 20 - mA [RMS] Power Dissipation PD 4 W Operating Frequency Freq 50 / 60 Hz View Angle 2Θ 1/2 110 deg. Luminous Flux Illuminance [1] [3] Correlated Color Temperature [4] 4-2 Absolute Maximum Ratings Parameter Operating Voltage Symbol vopt [5] Value Unit 253/265 V [RMS] Power Dissipation PD 7.5 W Junction Temperature Tj 125 ºC Operating Temperature Topr -30 ~ +85 ºC Storage Temperature Tstg -40 ~ +120 ºC ESD Sensitivity - ±2,000V HBM - *Notes : [1] Acriche series maintains a tolerance of ±10% on flux and power measurements. [2] ФV is the total luminous flux output as measured with an integrated sphere. [3] Illuminance is measured at 50cm distance [4] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. CCT ±5% tester tolerance [5] ‘Operating Voltage' doesn't indicate the maximum voltage which customers use, but it means tolerable voltage according to the voltage variation rate by one's country. It is recommended that the temperature of lead frame should be below 70 ℃. Rev. 03 7 May 2008 www.ZLED.com Z-Power LED X10490 Technical Data Sheet Color spectrum 1. Pure white Relative Spectral Power [a.u.] 1 .2 P u r e W h it e P h o t o p ic s e n s it iv it y c u r v e 1 .0 0 .8 0 .6 0 .4 0 .2 0 .0 300 400 500 600 700 800 W a v e le n g th [ n m ] 2. Warm white 1 .2 Relative Spectral Power [a.u.] W a r m w h it e ( C R I 7 0 ) 1 .0 0 .8 0 .6 0 .4 0 .2 0 .0 300 400 500 600 700 800 W a v e le n g th [ n m ] Rev. 03 8 May 2008 www.ZLED.com Z-Power LED X10490 Technical Data Sheet Current – Voltage characteristics 1. AX3201 80 100V Current [RMS , mA] 60 40 20 0 0 25 50 75 100 125 100 125 V o lt a g e [ R M S , V ] 2. AX3211 80 110V Current [RMS , mA] 60 40 20 0 0 25 50 75 V o lt a g e [ R M S , V ] Rev. 03 9 May 2008 www.ZLED.com Z-Power LED X10490 Technical Data Sheet Current – Voltage characteristics 3. AX3221 40 220V Current [RMS , mA] 30 20 10 0 0 50 100 150 200 250 V o lt a g e [ R M S , V ] 4. AX3231 40 230V Current [RMS , mA] 30 20 10 0 0 50 100 150 200 250 V o lt a g e [ R M S , V ] Rev. 03 10 May 2008 www.ZLED.com Z-Power LED X10490 Technical Data Sheet Voltage – Relative flux characteristics 1. AX3201 2 .0 Relative Luminous Flux [a.u.] 100V 1 .5 1 .0 0 .5 0 .0 80 85 90 95 100 105 110 115 120 120 125 130 V o lta g e [ R M S , V ] 2. AX3211 2 .0 Relative Luminous Flux [a.u.] 110V 1 .5 1 .0 0 .5 0 .0 90 95 100 105 110 115 V o lta g e [ R M S , V ] Rev. 03 11 May 2008 www.ZLED.com Z-Power LED X10490 Technical Data Sheet Voltage – Relative flux characteristics 3. AX3221 2 .0 Relative Luminous Flux [a.u.] 220V 1 .5 1 .0 0 .5 0 .0 180 190 200 210 220 230 240 250 260 V o lta g e [ R M S , V ] 4. AX3231 2 .0 Relative Luminous Flux [a.u.] 230V 1 .5 1 .0 0 .5 0 .0 190 200 210 220 230 240 250 260 270 V o lta g e [ R M S , V ] Rev. 03 12 May 2008 www.ZLED.com Z-Power LED X10490 Technical Data Sheet Relative Flux – Junction temperature characteristics 1. AX32X1 Relative Luminous Flux [a.u.] 1 .0 0 .8 0 .6 0 .4 p u re w h ite w a rm w h ite (C R I 7 0 ) 0 .2 0 .0 30 40 50 60 70 80 90 100 110 120 o Ju n ctio n Tem p eratu re, T j [ C ] Typical dome type radiation pattern 1. AX32X1 0 Relative luminous flux 1.0 30 0.8 0.6 60 0.4 0.2 0.0 -80 -60 -40 -20 0 Angle (deg.) Rev. 03 13 May 2008 www.ZLED.com Z-Power LED X10490 Technical Data Sheet Acriche Binning structure graphical representation 1. AX32X1 0.48 0.44 Pure white Warm white Plankian locus SK1 SH1 SH0 SL1 SJ0 SK0 SL0 SHA SJA SKA SLA SHB SJB SKB SLB 0.40 CIE (y) SJ1 SV2 SV1 0.36 SX1 SV0 SW0 0.32 SX0 SWA SY0 SYA 0.28 0.24 0.24 0.28 0.32 0.36 0.40 0.44 0.48 0.52 CIE (x) *Notes : For more detail Acriche binning, see the Acriche Binning and Labeling document. Rev. 03 14 May 2008 www.ZLED.com Z-Power LED X10490 Technical Data Sheet Operating instructions of AX32X1 1. Operating temperature Surface Temperature (Ts) Parameter Value Unit RθjS 6~7 ℃/W Tj max 125 ℃ Ts max 100 ℃ 2. Thermal modeling TA Tj TS TB TA Rθ Tj Rθ jS TS Rθ Rθ SB TB BA TA j TA Notes : [1] Acriche must be used with proper heat management. [2] It is recommended that the temperature of board should be below 70 ℃. [3] For more information, refer to Z Power led Thermal Management Guide. (www.essc.co.kr/_HOMEPAGE/home_kor/product/spec/thermal.pdf) Rev. 03 15 May 2008 www.ZLED.com Z-Power LED X10490 Technical Data Sheet Operating instructions of AX32X0 3. Heat sink Heat Sink Depth Foot print Area Base Thickness Fin Specification & Size Size : 44 x 44 mm S : 7mm TB : 4mm, FH : 18mm N : 7ea DH : 22.mm Footprint: 745mm2 Power Dissipation:4W Specification & Size Size : 50 x 50 mm S : TB : mm, FH : mm N : DH : 25 mm Footprint: 745mm2 Power Dissipation:4W TB(ºC) RθBA(ºC /W) 73.8 10 TB(ºC) RθBA(ºC /W) 56.2 5 Rev. 03 16 May 2008 www.ZLED.com Z-Power LED X10490 Technical Data Sheet PCB type Reel Packaging Note : 1. The number of loaded products in the reel is 100ea 2. All dimensions are in millimeters (tolerance : ±0.2 ) 3. Scale none *The appearance and specifications of the product may be changed for improvement without notice. Rev. 03 17 May 2008 www.ZLED.com Z-Power LED X10490 Technical Data Sheet Packaging Structure Aluminum Vinyl Bag PART NO. : ######-## QUANTITY : 100 LOT NUMBER : #######-####### BIN CODE : ####### Outer Box TYPE c SIZE(mm) a c b 350 350 370 ZLED PART : W42180-** PO CODE : ## Q'YT : ###### LOT NO : YMDD-##### DATE : ###### ZLED b SEOUL SEMICONDUCTOR CO.,LTD a Note : 1. 5 reels are loaded in box 2. Scale none 3. For more information about binning and labeling, refer to the Application Note - 1 Rev. 03 18 May 2008 www.ZLED.com Z-Power LED X10490 Technical Data Sheet Precaution for use [1] Acriche series run on high voltage such as 110 V or 220 V. [2] Please don't touch the PCB surface, which has built-in terminals and chips, with your hands or metals, while Acriche series is running. [3] Please don't add or change wires,while Acriche series is running. Handling of silicone resin for LEDS [1] Acriche series is encapsulated by silicone resin for the highest flux efficiency. [2] Notes for handling of Silicone resin Acriche series. [3] Avoid touching silicone resin parts especially by sharp tools such as Pincette (Tweezers). [4] Avoid leaving fingerprints on silicone resin parts. [5] Dust sensitivity silicone resin need containers having cover for storage. [6] When populating boards in SMT production, there are basically no restrictions regarding the form of the pick and place nozzle, except that mechanical pressure on the surface of the resin must be prevent. [7] Please do not force over 3000 gf impact or pressure diagonally on the silicon lens. It will cause fatal damage of this product. [8] Please do not recommend to cover the silicone resin of the Acriche series with other resin (epoxy, urethane, etc). Rev. 03 19 May 2008 www.ZLED.com