Rosenberger LH1-053-180-NM Cable assembly Datasheet

Technical Data Sheet
RF_35/09.14/6.2
Dieses Dokument ist urheberrechtlich geschützt ● This document is protected by copyright ● Rosenberger Hochfrequenztechnik GmbH & Co. KG
Rosenberger
Micro RF®
LH1-053-XXX-NM
CABLE ASSEMBLY
All dimensions are in mm; tolerances according to ISO 2768 m-H
Available Variants
Type
LH1-053-80-NM
LH1-053-100-NM
LH1-053-120-NM
LH1-053-140-NM
LH1-053-180-NM
LH1-053-200-NM
LH1-053-500-NM
Cable
H1
H1
H1
H1
H1
H1
H1
Length a
[mm]
80 ± 5
100 ± 5
120 ± 5
140 ± 5
180 ± 5
200 ± 5
500 ± 5
(RTK013)
(RTK013)
(RTK013)
(RTK013)
(RTK013)
(RTK013)
(RTK013)
Weight
[g]
0.4
0.5
0.6
0.7
0.9
1.0
tbm
Packing
[pcs in plastic bag]
25
25
25
25
25
25
10
Interface
According to
15C102-40MX-NM, Micro Clamp
Technical data connector
15Z202-1H1XX-NM
All dimensions are in mm; tolerances according to ISO 2768 m-H
Material and plating
Connector parts
Center contact
Outer contact
Isolator
Material
Plating
Beryllium copper 3-6µm Ag over 0,2-1µm Cu
Spring bronze
AuroDur®, gold plated
LCP
Rosenberger Hochfrequenztechnik GmbH & Co. KG
P.O.Box 1260
D-84526 Tittmoning
Germany
www.rosenberger.de
Tel. : +49 8684 18-0
Email : [email protected]
Page
1/2
Technical Data Sheet
Rosenberger
Micro RF®
LH1-053-XXX-NM
CABLE ASSEMBLY
Electrical data
RF_35/09.14/6.2
Dieses Dokument ist urheberrechtlich geschützt ● This document is protected by copyright ● Rosenberger Hochfrequenztechnik GmbH & Co. KG
Impedance
Frequency
Return loss (over 2 assemblies)
Insertion loss (over 2 assemblies)
Insulation resistance
Center contact resistance
Outer contact resistance
50 Ω
DC to 6 GHz
≥ -26 dB, DC to 2 GHz
≥ -26 dB, 2 to 4 GHz
≥ -17 dB, 4 to 8 GHz
≤ 1 dB, DC to 2 GHz
≤ 2 dB, 2 to 4 GHz
≤ 5 dB, 4 to 8 GHz
≥ 0.5 x103 MΩ
≤ 100 mΩ
≤ 50 mΩ
Mechanical data
Mating cycles
Unmating force
≥ 50
≥6N
Environmental data
Temperature range
Storage temperature
RoHS
-40°C to +90°C
-40°C to +90°C
compliant
Suitable cables
RTK 013 cable group H1
Micro coax cable ø=1.37mm, center conductor ø=0.3mm
Connector are only sold with cable.
Standard length available and customized length on request.
Picture on data sheet show an assembly example
Minimum bending radius repeated 8x ø, single 4x ø
While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on
our part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve our
products, we reserve the right to make changes judged to be necessary.
Draft
Date
Approved
Date
Rev.
Engineering change number
Name
Date
F. Michelmann
09.11.05
S.Murr
08.06.2015
700
15-0719
P. Schroeder
08.06.15
Rosenberger Hochfrequenztechnik GmbH & Co. KG
P.O.Box 1260
D-84526 Tittmoning
Germany
www.rosenberger.de
Tel. : +49 8684 18-0
Email : [email protected]
Page
2/2
Similar pages