Taoglas GW593153 2.4ghz/5.1~5.85ghz 3dbi screw mount dipole antenna Datasheet

SPECIFICATION
Part No.
:
GW.59.3153
Product Name
:
2.4GHz/5.1~5.85GHz 3dBi Screw mount Dipole
Antenna
Description
:
RP-SMA Male Straight Connector
Hinged
IP-65
TPU Housing
Length 156mm
RoHS Compliant
SPE-11-8-134/G/MC Page 1 of 16
1. Introduction
The GW.59 dipole RP-SMA plug mount antenna is ideal for 2.4GHz/5.15~5.85GHz
wireless applications such as Bluetooth and Wireless LAN. At 156mm in length
omni-directional 3dBi gain across all bands ensures constant reception and
transmission. The antenna structure is designed for robust handling and the housing is
made with TPU giving superior environmental reliability and a quality finish. The
antenna can be rotated 90 degrees on the base hinge for ease of placement.
Many module manufacturers specify peak gain limits for any antennas that are to be
connected to that module. Those peak gain limits are based on free-space conditions.
In practice, the peak gain of an antenna tested in free-space can degrade by at least
1 or 2dBi when put inside a device. So ideally you should go for a slightly higher peak
gain antenna than mentioned on the module specification to compensate for this
effect, giving you better performance.
Upon testing of any of our antennas with your device and a selection of appropriate
layout, integration technique, or cable, Taoglas can make sure any of our antennas’
peak gain will be below the peak gain limits. Taoglas can then issue a specification
and/or report for the selected antenna in your device that will clearly show it
complying with the peak gain limits, so you can be assured you are meeting regulatory
requirements for that module.
For example, a module manufacturer may state that the antenna must have less than
2dBi peak gain, but you don’t need to select an embedded antenna that has a peak
gain of less than 2dBi in free-space. This will give you a less optimized solution. It is
better to go for a slightly higher free-space peak gain of 3dBi or more if available. Once
that antenna gets integrated into your device, performance will degrade below this
2dBi peak gain due to the effects of GND plane, surrounding components, and device
housing. If you want to be absolutely sure, contact Taoglas and we will test.
SPE-11-8-134/G/MC Page 2 of 16
Choosing a Taoglas antenna with a higher peak gain than what is specified by the
module manufacturer and enlisting our help will ensure you are getting the best
performance possible without exceeding the peak gain limits.
It is better not to select an embedded antenna with very low free-space peak gain
(<2dBi) directly, as this antenna would have worse performance in your device, and
lead to compromised performance compared to using a Taoglas antenna.
2. Specification Table
Parameter
Frequency
GSM Band
2.4 ~ 2.5GHz,
5.15 ~ 5.85GHz
Peak Gain (dBi)*
2.37
2.93
Average Gain (dBi)*
-1.21
-1.32
Efficiency (%)*
75
73
Return Loss (dB)*
- 10 dB Maximum
SPE-11-8-134/G/MC Page 3 of 16
Radiation
Omni-directional
Polarization
Linear Vertical
Power Handling
1W
Impedance
50 Ω
MECHANICAL
Cable
RG-178 Coaxial Cable
Antenna Cover
TPE
Antenna Base
PC & PBT
Color
Black
Connector
RP-SMA(M)
IP rating
IP65
ENVIRONMENTAL
Operation
Temperature
Storage
Temperature
-40°C ~ + 85°C
-40°C ~ + 85°C
*The antenna was measured in free space.
SPE-11-8-134/G/MC Page 4 of 16
3. Antenna Characteristics
3.1. Return Loss
3.2. Peak Gain
SPE-11-8-134/G/MC Page 5 of 16
3.3. Average Gain
3.4. Efficiency
SPE-11-8-134/G/MC Page 6 of 16
4. Radiation Patterns
The antenna radiation pattern was measured in ETS Anechoic Chamber. The
testing setup is as below. The antenna was measured in free space.
SPE-11-8-134/G/MC Page 7 of 16
XY Plane
X
Y
X
Y
SPE-11-8-134/G/MC Page 8 of 16
XZ Plane
Z
X
Z
X
SPE-11-8-134/G/MC Page 9 of 16
YZ Plane
Z
Y
Z
Y
SPE-11-8-134/G/MC Page 10 of 16
5. Drawing (Unit: mm)
SPE-11-8-134/G/MC Page 11 of 16
6. Application Note
6.1. GW.59 antenna measurement setup as shown the
below ,(40mmx60mm PCB board)
On the short side
Antenna straight
Antenna R/A
On the 30cmX30cm ground plane
Antenna straight
Antenna R/A
On the long side
Antenna straight
Antenna R/A
On the 50cmX50cm ground plane
Antenna straight
Antenna R/A
SPE-11-8-134/G/MC Page 12 of 16
6.2. Return Loss when antenna setup on different conditions
6.3. GW.59 antenna measurement,(40mmx100mm PCB
board)
On the short side
Antenna straight
Antenna R/A
On the long side
Antenna straight
Antenna R/A
SPE-11-8-134/G/MC Page 13 of 16
6.4. Return Loss when antenna setup on different conditions
6.5. GW.59 antenna measurement,(90mmx150mm PCB
board)
On the short side
Antenna straight
Antenna R/A
On the long side
Antenna straight
Antenna R/A
SPE-11-8-134/G/MC Page 14 of 16
6.6. Return Loss when antenna setup on different conditions
SPE-11-8-134/G/MC Page 15 of 16
Taoglas makes no warranties based on the accuracy or completeness of the contents of this document and
reserves the right to make changes to specifications and product descriptions at any time without notice.
Taoglas reserves all rights to this document and the information contained herein.
Reproduction, use or disclosure to third parties without express permission is strictly prohibited.
Copyright © Taoglas Ltd.
SPE-11-8-134/G/MC Page 16 of 16
Similar pages