LMDKVG34M Part Number: www.SunLED.com T-1(3mm) BI-COLOR INDICATOR LAMP PRELIMINARY SPEC Features z UNIFORM z LOW z3 LIGHT OUTPUT. POWER CONSUMPTION. LEADS WITH ONE COMMON LEAD. z I.C. COMPATIBLE. z LONG z RoHS LIFE - SOLID STATE RELIABILITY. COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) MDK (InGaA lP) VG (InGa AlP) Unit Reverse Voltage VR 5 5 V Forward Current IF 30 30 mA Forward Current (peak) 1/10Duty Cycle 0.1ms Pulse Width iFS 185 150 mA Power Dissipation PT Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Storage Temperature 75 75 Lead Solder Temperature [2mm Below Package Base] 260°C For 3 Seconds Lead Solder Temperature [5mm Below Package Base] 260°C For 5 Seconds Part Number LMDKVG34M Emitting Color Emitting Material Red InGaAlP Green InGaAlP Published Date : MAR 20, 2008 mW °C Operating Characteristics (TA=25°C) VG Unit (InGaAlP) Forward Voltage (Typ.) (IF=20mA) VF 1.95 2.1 V Forward Voltage (Max.) (IF=20mA) VF 2.5 2.5 V Reverse Current (Max.) (VR=5V) IR 10 10 uA Wavelength of Peak Emission (Typ.) (IF=20mA) λP 650 574 nm Wavelength of Dominant Emission (Typ.) (IF=20mA) λD 635 570 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Δλ 28 20 nm Capacitance (VF=0V, f=1MHz) C 35 15 pF Lens-color White Diffused Drawing No : SDSA3146 MDK (InGaA lP) Luminous Intensity (IF=20mA) mcd Wavelength nm λP min. typ. 110 795 650 18 108 574 V3 Checked : B.L.LIU Viewing Angle 2 θ 1/2 60° P.1/5 Part Number: www.SunLED.com LMDKVG34M T-1(3mm) BI-COLOR INDICATOR LAMP MDK Published Date : MAR 20, 2008 Drawing No : SDSA3146 V3 Checked : B.L.LIU P.2/5 Part Number: www.SunLED.com LMDKVG34M T-1(3mm) BI-COLOR INDICATOR LAMP VG Published Date : MAR 20, 2008 Drawing No : SDSA3146 V3 Checked : B.L.LIU P.3/5 Part Number: www.SunLED.com LMDKVG34M T-1(3mm) BI-COLOR INDICATOR LAMP Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR 20, 2008 Drawing No : SDSA3146 V3 Checked : B.L.LIU P.4/5 Part Number: www.SunLED.com T-1(3mm) BI-COLOR INDICATOR LAMP PACKING & LABEL SPECIFICATIONS Published Date : MAR 20, 2008 LMDKVG34M Drawing No : SDSA3146 LMDKVG34M V3 Checked : B.L.LIU P.5/5