AMCC CS1220 Sonet/sdh/atm quad oc-3/12 with clock data recovery (cdr) Datasheet

PRODUC T BRIEF
0
S122
S1220
SONET/SDH/ATM Quad OC-3/12 with Clock Data Recovery (CDR)
Features
Description
• Complies with Bellcore and ITU-T specifications for jitter tolerance, jitter transfer, and jitter generation
• On-chip high-frequency PLLs for clock generation and clock recovery
• Supports Data Rates of 155.52 Mbps (OC-3)
and 622.08 Mbps (OC-12)
• LVDS or LVPECL differential serial interface
• Internal termination of the optic’s LVPECL
driver renders a seamless power saving connection
• Typical 320 mW power in LVDS I/O mode
• Directly compatible with 2.5 V or 3.3 V LVDS,
3.3 V LVPECL (DC and AC)
• 196 PBGA Package,15x15 mm2 with Green/
RoHS compliant lead free option
• CMOS 0.13 micron technology
• 1.2 V and 3.3 V/2.5 V Power supply
• Receiver lock detect output for each channel
• Continued on next page...
• Signal detect input on each channel
• Selectable reference frequencies of 19.44,
77.76 or 155.52 MHz
• Quad configuration, mixed Mode OC-3/OC-12
• Independent power down of unused channels
• Drop-in-replacement for S1212
The S1220 device consists of four CDR modules.
Each of the modules can independently run at
the OC-3 or OC-12 data rate. The S1220 can also
be provisioned to mix and match OC-3 and OC12 data streams within the same device.
Applications
•
•
•
•
•
•
•
•
•
SONET/SDH OC-3/OC-12
SONET/SDH modules
SONET/SDH test equipment
ATM over SONET/SDH
Section repeaters
Add Drop Multiplexers (ADM)
Broad-band cross-connects
Fiber optic terminators
Fiber optic test equipment
The S1221 is divided into four transmitter
channels and four receiver channels.
AMCC Suggested Interface Devices
The S1220 can be configured in Media
Independent Interface (MII) mode or in Non-MII
mode.
The S1220 minimizes the external components
on the board: no external loop filter
component, internally biased outputs, internally
provided common mode bias for AC input, and
internally provided bias for external LVPECL
driver.
The S1220 offers significant advantages in
power and real estate savings with high level of
integration, and a small package.
The figure below, System Block Diagram, shows
a typical network application.
Overview
The function of the S1220 clock and data
recovery unit is to derive high speed timing
signals for SONET/SDH-based equipment. The
S1220 receives either an OC-12 or an OC-3
scrambled NRZ signal and recovers the clock
from the data stream. The device outputs a
differential bit clock and retimed data.
FPGA
Framers
With Integrated
SERDES
Or
ASIC
OTX
DATA
CDR
DATA
CDR
CLOCK
DATA
ORX
OTX
ORX
ORX
DATA
CDR
DATA
CDR
CLOCK
OTX
OTX
DATA
CDR
CLOCK
ORX
OTX
CDR
DATA
DATA
CDR
CLOCK
MII port
AMCC S1208 (EVROS)
STS-12/STM-4 DS3/E3/DS1 E1/VT/
TU SONET/SDH Mapper
Agilent
HFBR-5908E
SFF Optical Transceiver
Sumitomo
SCP6802-GL
SCM6005
SFP & SFF
Optical Transceiver
Finisar
FTRJ1322P1xTR
SFP Optical Transceiver
OCP
TRPN03 & TRPN12
SFP Optical Transceiver
JDS Uniphase
CT2-P
SFP Optical Transceiver
S1220
S1220
CDR
DATA
OC-48/4 x OC-12 SONET/SDH Framer
and channelized ATM/POS Mapper
Internal clocking and control functions are
transparent to the user.
CDR
DATA
CDR
CLOCK
ORX
AMCC S4806 (OHIO)
• Serial data input
• Serial Data and recovered clock outputs
DATA
OTX
SONET/SDH Mapper STS-48/STM-16,
4 x STS-12/STM, 4 x STS-3/STM-1
The sequence of operations is as follows for
each Channel:
The Low Voltage LVDS or LVPECL interfaces
guarantee compliance with the bit-error rate
requirements of the Telcordia and ITU-T
standards.
CDR
DATA
CDR
CLOCK
AMCC S4805 (DANUBE)
ORX
ORX
DATA
CDR
DATA
CDR
CLOCK
DATA
CDR
DATA
CDR
CLOCK
OTX
ORX
OTX
MII port
System Block Diagram with the S1220
FPGA
Framer
With integrated
SERDES
Or
ASIC
SPECIFIC AT IONS
S1220
6290 Sequence Dr.
San Diego, CA 92121
P 858 450 9333
F 858 450 9885
www.amcc.com
For technical support, please call 1-800-840-6055 or 858-535-6517, or email [email protected].
AMCC reserves the right to make changes to its products, its datasheets, or related documentation, without notice and warrants its products solely pursuant to its terms and
conditions of sale, only to substantially comply with the latest available datasheet. Please consult AMCC’s Term and Conditions of Sale for its warranties and other terms, conditions
and limitations. AMCC may discontinue any semiconductor product or service without notice, and advises its customers to obtain the latest version of relevant information to verify,
before placing orders, that the information is current. AMCC does not assume any liability arising out of the application or use of any product or circuit described herein, neither does
it convey any license under its patent rights nor the rights of others. AMCC reserves the right to ship devices of higher grade in place of those of lower grade.
AMCC SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, INTENDED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT APPLICATIONS, DEVICES OR SYSTEMS OR
OTHER CRITICAL APPLICATIONS.
AMCC is a registered trademark of Applied Micro Circuits Corporation. PowerPC and the PowerPC logo are registered trademarks of IBM Corporation. All other trademarks are the
property of their respective holders. Copyright © 2006 Applied Micro Circuits Corporation. All Rights Reserved.
S1220_PB2020_v0.04_20061103
Similar pages