J112 RoHS Compliant E197851 20.2 x 5.3 x 12.8 mm Features • • • • Low power consumption .12W Ultra light weight Narrow width for high density mounting UL/CUL certified Contact Data* Contact Arrangement 1A = SPST N.O. Contact Resistance < 50 milliohms initial Contact Rating 5A @ 250VAC Resistive, Contact Material AgNi + Au 70ºC, 20,000 Cycles Maximum Switching Power 150W, 1250VA 5A @ 30VDC Resistive, Maximum Switching Voltage 250VAC, 110VDC 70ºC, 20,000 Cycles Maximum Switching Current 5A Coil Data* Coil Voltage VDC Rated Coil Resistance Ω +/- 10% Pick Up Voltage Release Voltage VDC (max) VDC (min) 75% of rated voltage Max Coil Power W Operate Time ms Release Time ms 10 5 10% of rated voltage 5 6.5 208 3.75 .5 12 15.6 1200 9.00 1.2 24 31.2 3200 18.00 2.4 .12 .18 General Data* Electrical Life @ rated load 100K cycles, average Mechanical Life 10M cycles, average Insulation Resistance 100M Ω min. @ 500VDC initial Dielectric Strength, Coil to Contact 2000V rms min. @ sea level initial Contact to Contact * Values can change due to the switching frequency, desired reliability levels, environmental conditions and in-rush load levels. It is recommended to test actual load conditions for the application. It is the user’s responsibility to determine the performance suitability for their specific application. The use of any coil voltage less than the rated coil voltage may compromise the operation of the relay. 1000V rms min. @ sea level initial 100m/s2 for 11 ms Shock Resistance Vibration Resistance 1.50mm double amplitude 10~40Hz Terminal (Copper Alloy) Strength 5N Operating Temperature -40oC to +85oC Storage Temperature -40oC to +155oC Solderability 260oC for 5 s Weight 3g www.citrelay.com phone - 763.535.2339 Dimensions shown in mm. Dimensions are shown for reference purposes only. fax - 763.535.2194 page 1 Specifications and availability subject to change without notice. J112 Ordering Information 1. Series J112 1A S 12VDC J112 2. Contact Arrangement 1A = SPST N.O. 3. Sealing Option S = Sealed 4. Contact Voltage 5VDC 12VDC 24VDC Dimensions Units = mm 20.14 [.79] 5.15 [.20] 12.50 [.49] 3.55 TYP [.14] 2.54 [.10] 10.16 [.40] 5.08 [.20] 4.07 [.16] 1.21 [.05] 0.34 TYP [.01] (2X) 0.50 [.02] (2X) 0.85 [.03] Schematics & PC Layouts Bottom Views 2.54 [.10] 10.16 [.40] 5.08 [.20] (4X) Ø1.20 [.05] page 2 www.citrelay.com phone - 763.535.2339 Dimensions shown in mm. Dimensions are shown for reference purposes only. fax - 763.535.2194 Specifications and availability subject to change without notice.