Tantalum Solid Electrolytic Capacitors/TES Surface Mount Type Series: TES Japan China ■ Features Low profile Height: H=1.2mm max. ■ Specifications Category temp. range -55 to 125°C Rated W.V. Range 4 to 16 V .DC 0.47 to 15 µ F Nominal Cap. Range Capacitance Tolerance DC Leakage Current I < 0.01CV or 0.5 (µA) after 2 minutes application of rated working voltage at 20°C (Whichever is greater) tanδ Please see the attached standard products list ±20 % (120Hz/20°C) Resistance to Soldering Heat The capacitor shall withstand dipping into solder for 5±1 seconds at 260 ±5°C After 500 hours exposure at 40 °C and 90 to 95 % R.H. without load, the capacitor shall meet the following limits. Capacitance change ±10% of initial measured value < initial specified value, miniatured size : < 150% of initial specified value. tanδ. DC leakage current < initial specified value After 2000 hours application of rated DC working voltage at 85°C or derated voltage at 125°C, the capacitor shall meet the following limits. Capacitance change ±10% of initial measured value < initial specified value tanδ. < 125 % of initial specified value DC leakage current Endurance ■ Marking ■ Dimensions in mm (not to scale) ● Size Z (- ) ( +) H Moisture Resistance Polarity bar (+ side) L P 16 C Capacitance code Capacitance(µF) 1st code 0.47 0.68 1 S W A 1.5 E W2 4 6.3 10 G J A w1 W2 W.V. code W.V. (V) code P Cap. code W.V.code 2.2 3.3 J N 4.7 S 6.8 W 10 A EIA code Size code L±0.2 2.0 Z 2012 15 E W1±0.2 W2±0.1 H max. 1.25 0.9 1.2 P 0.5±0.2 (Ex.) JE : 6.3V 1.5µF ■ Case size W.V.(V.DC) Cap(µF) 0.47 (474) 0.68 (684) 1.0 (105) 1.5 (155) 2.2 (225) 3.3 (335) 4.7 (475) 6.8 (685) 10 (106) 15 (156) 4(0G) Standard 6.3(0J) Miniature Standard 10(1A) Miniature Standard 16(1C) Miniature Z Z Z Z Z Miniature Z Z Z Z Standard Z Z Z Z Z Z Z Z Z Note : 1. ( )indicates W.V. and capacitance code. 2. When selecting W.V. refer to page 20. 3. We recommend current sizes shown in the above table for new design, but conventional case size is available on request. 4. Other rating upon request (voltage, capacitance, tolerance) Rev.02/04 Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail. EE31 Ta . TES Tantalum Solid Electrolytic Capacitors/TES ■ Standard Products Specification Case Size W.V. Cap. (±20%) LxWxH (µF) (mm) 2.2 4 6.3 10 16 2.0x1.25x1.2 Size Code L.C (µA) Z 0.5 Part No. ESR tan δ (120Hz) (100kHz) (20°C) (20°C) (Ω) 0.10 25 Min. Packaging Q'ty Taping (pcs) ECST0GZ225R 3000 3.3 2.0x1.25x1.2 Z 0.5 0.15 20 ECST0GZ335R 3000 6.8 2.0x1.25x1.2 Z 0.5 0.20 20 ECST0GZ685R 3000 10 2.0x1.25x1.2 Z 0.5 0.20 15 ECST0GZ106R 3000 15 2.0x1.25x1.2 Z 0.6 0.20 15 ECST0GZ156R 3000 1.5 2.0x1.25x1.2 Z 0.5 0.10 25 ECS T0JZ155R 3000 2.2 2.0x1.25x1.2 Z 0.5 0.12 20 ECST0JZ225R 3000 4.7 2.0x1.25x1.2 Z 0.5 0.20 20 ECST0JZ475R 3000 6.8 2.0x1.25x1.2 Z 0.5 0.20 15 ECST0JZ685R 3000 10 2.0x1.25x1.2 Z 0.7 0.20 15 ECST0JZ106R 3000 1 2.0x1.25x1.2 Z 0.5 0.10 25 ECST1AZ105R 3000 1.5 2.0x1.25x1.2 Z 0.5 0.12 20 ECST1AZ155R 3000 2.2 2.0x1.25x1.2 Z 0.5 0.20 15 ECST1AZ225R 3000 3.3 2.0x1.25x1.2 Z 0.5 0.20 15 ECST1AZ335R 3000 4.7 2.0x1.25x1.2 Z 0.5 0.20 15 ECST1AZ475R 3000 0.47 2.0x1.25x1.2 Z 0.5 0.10 28 ECST1CZ474R 3000 0.68 2.0x1.25x1.2 Z 0.5 0.10 25 ECST1CZ684R 3000 1 Z 0.5 0.20 20 ECST1CZ105R 3000 2.0x1.25x1.2 Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail. EE32