AH3769Q Q HIGH-VOLTAGE, LOW-SENSITIVITY AUTOMOTIVE HALL-EFFECT LATCH PRELIMINARY - CONFIDENTIAL Description Pin Assignments The AH3769Q is an AEC-Q100 qualified high-voltage, low-sensitivity Hall-Effect latch IC designed for brushless DC-motor commutation, speed measurement, angular or linear encoders and position sensors in automotive applications. To support a wide range of demanding applications, the design is optimized to operate over the supply range of 3.0V to 28V. With chopper stabilized architecture and an internal bandgap regulator to provide temperature compensated supply for internal circuits, the AH3769Q provides a reliable solution over the whole operating range. For robustness and protection, the device has a reverse blocking diode with a Zener clamp on the supply. The output has an over current limit and a Zener clamp. (Top View) 3 OUTPUT GND 2 1 VDD SOT23 The single, open-drain output can be switched on with South pole of sufficient strength and switched off with North pole of sufficient strength. When the magnetic flux density (B) perpendicular to the package is larger than the operate point (Bop) the output is switched (Top View) 3. OUTPUT 2. GND on (pulled low). The output is held latched until magnetic flux density reverses and becomes lower than the release point (Brp). 1. VDD SIP-3 Features Applications • Bipolar Latch Operation (South Pole: On, North Pole: off) • Brushless DC-Motor Commutation • High Sensitivity: Bop and Brp of +220G and -220G Typical • Revolution Per Minute (RPM) Measurement • Single, Open-Drain Output with Overcurrent Limit • Angular and Linear Encoder and Position Sensing and Indexing • 3.0V to 28V Operating Voltage Range • Flow Meters • Chopper Stabilized Design Provides • Contactless Commutation, Speed Measurement and Angular Superior Temperature Stability Minimal Switch Point Drift Enhanced Immunity to Stress • Good RF Noise Immunity • Reverse Blocking Diode • Zener Clamp on Supply and Output Pins • -40C to +150°C Operating Temperature • ESD: HBM ＞8kV, CDM: >2kV • AEC-Q100 Grade 0 Qualified • Industry Standard SOT23 and SIP-3 Packages Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3) Notes: Position Sensing/Indexing in Automotive Applications 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. AH3769Q Document number: DS38078 Rev. 2 - 2 1 of 13 www.diodes.com July 2015 © Diodes Incorporated AH3769Q Q Typical Applications Circuit PRELIMINARY - CONFIDENTIAL 3.0V to 28V VDD RL OUTPUT AH3769Q CIN GND Note: 4. CIN is for power stabilization and to strengthen the noise immunity, the recommended capacitance is 10nF ~ 100nF. RL is the pull-up resistor. Pin Descriptions Package: SOT23 and SIP-3 Pin Number Pin Name 1 VDD 2 3 GND OUTPUT Function Power Supply Input Ground Output Pin Functional Block Diagram VDD Power switch To All Subcircuits Amp Low-Pass Filter Sample and Hold Dynamic Offset Cancellation Amp OUTPUT Control Current Limit GND AH3769Q Document number: DS38078 Rev. 2 - 2 2 of 13 www.diodes.com July 2015 © Diodes Incorporated AH3769Q Q Absolute Maximum Ratings (Notes 5 & 6) (@TA = +25°C, unless otherwise specified.) PRELIMINARY - CONFIDENTIAL Symbol Value Unit VDD Supply Voltage (Note 6) 32 V VDDR Reverse Supply Voltage (Note 6) -32 V VOUT_MAX Output Off Voltage (Note 6) 32 V IOUT Continuous Output Current 60 mA Reverse Output Current -50 mA IOUT_R Characteristic B Magnetic Flux Density PD Package Power Dissipation Ts Storage Temperature Range TJ Maximum Junction Temperature +150 °C Electros Static Discharge Withstand - Human Body Model (HMB) Electros Static Discharge Withstand - Machine Model (MM) Electros Static Discharge Withstand - Charged Device Model (CDM) 8 800 2 kV V kV ESD HBM ESD MM ESD CDM Notes: Unlimited 550 230 -65 to +165 SIP-3 SOT23 mW °C 5. Stresses greater than the 'Absolute Maximum Ratings' specified above may cause permanent damage to the device. These are stress ratings only; functional operation of the device at these or any other conditions exceeding those indicated in this specification is not implied. Device reliability may be affected by exposure to absolute maximum rating conditions for extended periods of time. 6. The absolute maximum VDD of 32V is a transient stress rating and is not meant as a functional operating condition. It is not recommended to operate the device at the absolute maximum rated conditions for any period of time. Recommended Operating Conditions (@TA = -40°C to +150°C, unless otherwise specified.) Symbol VDD TA Rating Unit Supply Voltage Parameter Operating 3.0 to 28 V Operating Temperature Range Operating -40 to +150 °C Electrical Characteristics Symbol VOUT_ON Conditions (Notes 7 & 8) (@TA = -40°C to +150°C, VDD = 3V to 28V, unless otherwise specified.) Parameter IDD Output On Voltage Output Leakage Current (when output is off) Supply Current IDD_R Reverse Supply Current tP_ON fc Device Power-On Time (start-up time) Chopping Frequency Response Time Delay (time from magnetic threshold reached to the start of the output rise or fall) Output Rising Time (external pull-up resistor RL and load capacitance dependent) Output Falling Time (Internal switch resistance and load capacitance dependent) Output Current Limit Zener Clamp Voltage ILKG td tr tf IOCL VZ Notes: Min Typ Max Unit IOUT = 20mA, B > Bop Conditions - 0.2 0.4 V VOUT = 28V, B < Brp, Output off - <0.1 10 µA Output open, TA = +25°C Output open, TA = -40°C to +150°C VDD = -18V, TA = +25°C VDD = -18V, TA = -40°C to +150°C VDD = -28V, TA = +25°C VDD = -28V, TA = -40°C to +150°C VDD >= 3V, B > Bop (Note 7) VDD >= 3V - 3 0.6 0.6 1.6 1.6 10 800 3.5 4 1,500 2,500 - mA mA µA µA µA µA µs kHz (Note 9) - 3.75 - µs RL = 1kΩ, CL = 20pF - 0.2 1 µs RL = 1kΩ, CL = 20pF - 0.1 1 µs 30 28 - 55 - mA V B > Bop, (Note 10 ) IDD = 5mA 7. When power is initially turned on, VDD must be within its correct operating range (3.0V to 28V) to guarantee the output sampling. The output state is valid after the start-up time of 10µs typical from the operating voltage reaching 3V. 8. Typical values are defined at TA = +25°C, VDD = 12V. Maximum and minimum values over the operating temperature range is not tested in production but guaranteed by design, process control and characterization. 9. Guaranteed by design, process control and characterization. Not tested in production. 10. The device will limit the output current IOUT to current limit of IOCL. AH3769Q Document number: DS38078 Rev. 2 - 2 3 of 13 www.diodes.com July 2015 © Diodes Incorporated AH3769Q Q Symbol Parameter Bops (South pole to part marking side for SOT23 and SIP-3 packages) Operation Point Brps (North pole to part marking side for SOT23 and SIP-3 packages) Bhy (|Bopx|-|Brpx|) Notes: Conditions VDD = 12V, TA = +25°C TA = -40°C to +150°C VDD = 12V, TA = +25°C TA = -40°C to +150°C VDD = 12V, TA = +25°C TA = -40°C to +150°C Release Point Hysteresis (Note 13) Min 170 -250 340 Typ 220 220 -220 -220 340 440 (1mT=10 Gauss) Max Unit 250 Gauss -170 500 11. When power is initially turned on, VDD must be within its correct operating range (3.0V to 28V) to guarantee the output sampling. The output state is valid after the start-up time of 10µs typical from the operating voltage reaching 3V. 12. Typical values are defined at TA = +25°C, VDD = 12V. Maximum and minimum values over the operating temperature range is not tested in production but guaranteed by design, process control and characterization. 13. Maximum and minimum hysteresis is guaranteed by design, process control and characterization. Output VDD (off-state) ( Output Voltage ) PRELIMINARY - CONFIDENTIAL Magnetic Characteristics (Notes 11 & 12) (TA = -40°C to +150°C, VDD = 3.0V to 28V, unless otherwise specified.) Bhy Turn off Turn on (on-state) VOUT_ON = VSAT Brp 0 Bop ( Magnetic Flux Density B ) S S Part mark Part mark AH3769Q Document number: DS38078 Rev. 2 - 2 N N (SOT23) (SIP-3) 4 of 13 www.diodes.com July 2015 © Diodes Incorporated AH3769Q Q Typical Operating Characteristics TA = +25oC Hyst Gauss (G) Gauss (G) 520 480 440 400 360 320 280 240 200 160 120 80 40 0 Bop 2 4 6 8 10 12 14 16 18 20 22 24 26 28 0 -40 -80 -120 -160 -200 -240 -280 -320 -360 -400 -440 -480 -520 TA = +25oC Brp 2 30 4 6 8 10 12 Supply Voltage (V) VDD = 3V Gauss (G) Hyst Bop -50 520 480 440 400 360 320 280 240 200 160 120 80 40 0 -25 0 25 50 75 100 125 150 175 18 20 22 24 26 -25 0 25 50 75 100 125 150 Switch Operate Point Bop vs Temperature Switch Release Points Brp vs Temperature Bop 25 50 75 100 125 150 175 0 -40 -80 -120 -160 -200 -240 -280 -320 -360 -400 -440 -480 -520 Brp -50 -25 0 25 50 75 100 125 150 Temperature ( C) Temperature ( C) Switch Operate Point Bop vs Temperature Switch Release Points Brp vs Temperature Document number: DS38078 Rev. 2 - 2 175 VDD = 12V o AH3769Q 30 Brp Temperature (oC) 0 28 VDD = 3V Temperature (oC) Hyst -25 0 -40 -80 -120 -160 -200 -240 -280 -320 -360 -400 -440 -480 -520 -50 VDD = 12V -50 16 Switch Release Point Brp vs Supply Voltage Gauss (G) Gauss (G) 520 480 440 400 360 320 280 240 200 160 120 80 40 0 14 Supply Voltage (V) Switch Operate Point Bop vs Supply Voltage Gauss (G) PRELIMINARY - CONFIDENTIAL Output Switch Operate and Release Points (Magnetic Thresholds) – Bop and Brp 175 o 5 of 13 www.diodes.com July 2015 © Diodes Incorporated AH3769Q Q Typical Operating Characteristics VDD = 28V Hyst Gauss (G) Gauss (G) 520 480 440 400 360 320 280 240 200 160 120 80 40 0 Bop -50 -25 0 25 50 75 100 125 150 0 -40 -80 -120 -160 -200 -240 -280 -320 -360 -400 -440 -480 -520 175 VDD = 12V Brp -50 -25 0 25 50 75 100 125 150 Temperature (oC) Temperature (oC) Switch Operate Point Bop vs Temperature Switch Release Points Brp vs Temperature 175 Supply Current 4.0 TA = +25 C Supply Current IDD (mA) Supply Current IDD (mA) 5.0 4.0 3.0 2.0 1.0 3.8 28V 3.5 3.3 3.0 2.8 3V 12V 5V 2.5 2.3 2.0 0.0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 -50 30 -25 0 25 50 75 100 Supply Voltage (V) Temperature (oC) Supply Current vs Supply Voltage Supply Current vs Temperature 125 150 175 3.0 2.8 TA = +25 C 2.5 2.3 2.0 1.8 1.5 1.3 1.0 0.8 0.5 0.3 0.0 -30 -28 -26 -24 -22 -20 -18 -16 -14 -12 -10 -8 -6 -4 -2 Reverse Supply Current IDD_R (mA) Reverse Supply Current Reverse Supply Current IDD_R (mA) PRELIMINARY - CONFIDENTIAL Output Switch Operate and Release Points (Magnetic Thresholds) – Bop and Brp (cont.) 1,200 1,050 900 -28V 750 -24V 600 450 300 -18V 150 0 -50 Reverse Supply Current vs Supply Voltage Document number: DS38078 Rev. 2 - 2 0 25 50 75 100 125 150 175 Temperature (oC) Supply Voltage (V) AH3769Q -25 Reverse Supply Current vs Temperature 6 of 13 www.diodes.com July 2015 © Diodes Incorporated AH3769Q Q Typical Operating Characteristics (cont.) TA = +25 C Output ON Voltage VOUT_ON (V) Output ON Voltage VOUT_ON (V) 0.40 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0.00 2 4 6 8 10 12 14 16 18 20 22 24 26 28 0.40 0.35 28V 0.30 0.25 0.20 12V 3V 0.15 0.10 0.05 0.00 30 -50 -25 0 25 Supply Voltage (V) 50 75 100 125 150 175 Temperature (oC) Output ON Voltage vs Supply Voltage Output ON Voltage vs Temperature 60 TA = +25 C 55 50 45 40 35 30 25 20 15 10 5 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 Output Leakage Current ILKG (nA) Output Leakage Current ILKG (nA) Output Switch Leakage Current 800 700 600 28V 500 400 300 200 12V 100 5V 3V 0 -50 -25 0 25 50 75 100 125 150 175 Temperature (oC) Supply Voltage (V) Output Leakage Current vs Supply Voltage Output Leakage Current vs Temperature 70 Output Current Limit IOCL (mA) Output Current Limit Output Current Limit IOCL (mA) PRELIMINARY - CONFIDENTIAL Output Switch On Voltage TA = +25 C 60 50 40 30 20 10 0 70 60 28V 50 40 3V 30 12V 5V 20 10 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 -50 Supply Voltage (V) Document number: DS38078 Rev. 2 - 2 0 25 50 75 100 125 150 175 Temperature (oC) Output Current Limit vs Supply Voltage AH3769Q -25 Output Current Limit vs Temperature 7 of 13 www.diodes.com July 2015 © Diodes Incorporated AH3769Q Q Thermal Performance Characteristics Package type: SOT23 TA (°C) 25 50 60 70 80 85 90 100 105 110 120 125 130 140 150 PD (mW) 230 184 166 147 129 120 110 92 83 74 55 46 37 18 0 Power Dissipation Curve 300 Power Dissipation PD (mW) PRELIMINARY - CONFIDENTIAL (1) 200 100 0 -40 0 25 50 75 100 Ambient Temperature TA (2) 125 150 (oC) Package type: SIP-3 TA (°C) 25 50 60 70 80 85 90 100 105 110 120 125 130 140 150 PD (mW) 550 440 396 362 308 286 264 220 198 176 132 110 88 44 0 PD (mW) Power Dissipation Curve 600 500 400 300 200 100 0 -40 0 25 50 75 100 125 150 TA (°C) AH3769Q Document number: DS38078 Rev. 2 - 2 8 of 13 www.diodes.com July 2015 © Diodes Incorporated AH3769Q Q PRELIMINARY - CONFIDENTIAL Ordering Information AH3769Q - XXX - X Packing Package 7 : Tape & Reel A: Ammo Box (Note 14) B: Bulk (Note 15) P : SIP-3 SA : SOT23 7” Tape and Reel Part Number Quantity Suffix Bulk Part Number Quantity Suffix Part Number Package Code Packaging AH3769Q-P-A AH3769Q-P-B P P SIP-3 SIP-3 NA 1,000 NA -B NA NA NA NA AH3769Q-SA-7 SA SOT23 NA NA 3,000/Tape & Reel -7 Notes: Ammo Box Quantity Part Number Suffix 4,000/Box NA NA -A NA NA 14. Ammo Box is for SIP-3 Spread Lead. 15. Bulk is for SIP-3 Straight Lead. Marking Information (1) Package Type: SOT23 (Top View) XX Y W X (2) XX : Identification code Y : Year 0 to 9 W : Week : A to Z : 1 to 26 week; a to z : 27 to 52 week; z represents 52 and 53 week X : Internal code Part Number Package Identification Code AH3769Q SOT23 WU Package Type: SIP-3 (Top View) Part Number 3769Q Y WW X Part Number AH3769Q AH3769Q Document number: DS38078 Rev. 2 - 2 Y : Year : 0~9 WW : Week : 01~52, "52" represents 52 and 53 week X : Internal Code Package SIP-3 9 of 13 www.diodes.com Identification Code 3769Q July 2015 © Diodes Incorporated AH3769Q Q Package Outline Dimensions (All dimensions in mm.) Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version. Package Type: SOT23 All 7° H K1 J K SOT23 Dim Min Max Typ A 0.37 0.51 0.40 B 1.20 1.40 1.30 C 2.30 2.50 2.40 D 0.89 1.03 0.915 F 0.45 0.60 0.535 G 1.78 2.05 1.83 H 2.80 3.00 2.90 J 0.013 0.10 0.05 K 0.890 1.00 0.975 K1 0.903 1.10 1.025 L 0.45 0.61 0.55 L1 0.25 0.55 0.40 M 0.085 0.150 0.110 a 8° All Dimensions in mm GAUGE PLANE 0.25 a M A L C L1 B D F G 0.17/0.37 Min/Max PART MARKING SURFACE 0.5/0.7 PRELIMINARY - CONFIDENTIAL (1) Die Hall Sensor Pin1 1.4/1.5 Sensor Location – To be updated AH3769Q Document number: DS38078 Rev. 2 - 2 10 of 13 www.diodes.com July 2015 © Diodes Incorporated AH3769Q Q Package Outline Dimensions (cont.) (All dimensions in mm.) Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version. Package Type: SIP-3 Bulk Sensor location to be added SIP-3 (Bulk) Dim Min Max A 3.9 4.3 a1 5° Typ a2 5° Typ a3 45° Typ a4 3° Typ B 2.8 3.2 C 1.40 1.60 D 0.33 0.432 E 0.40 0.508 F 0 0.2 G 1.24 1.30 H 2.51 2.57 J 0.35 0.43 L 14.0 15.0 N 0.63 0.84 P 1.55 All Dimensions in mm L a1 J a2 B P N D C A a3 E a4 G H F Min/Max 0.63/0.84 0.27/0.48 1.90/2.10 1.05/1.25 PART MARKING SURFACE Hall Sensor 1 2 Die PRELIMINARY - CONFIDENTIAL (2) PART MARKING SURFACE 3 Sensor Location – To be updated AH3769Q Document number: DS38078 Rev. 2 - 2 11 of 13 www.diodes.com July 2015 © Diodes Incorporated AH3769Q Q Package Outline Dimensions (cont.) (All dimensions in mm.) Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version. Package Type: SIP-3 Ammo Pack N D EF SIP-3 (Ammo Pack) Dim Min Max A 3.9 4.3 a1 45° Typ a2 3° Typ B 2.8 3.2 C 1.40 1.60 D 0.35 0.41 E 0.43 0.48 F 0 0.2 G 2.4 2.9 N 0.63 0.84 P 1.55 All Dimensions in mm C A G a1 a2 B P Min/Max 0.63/0.84 0.27/0.48 1.90/2.10 1.05/1.25 PART MARKING SURFACE Hall Sensor 1 2 Die PRELIMINARY - CONFIDENTIAL (3) PART MARKING SURFACE 3 Sensor Location – To be updated Suggested Pad Layout Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version. (1) Package Type: SOT23 Dimensions Value (in mm) Z 2.9 X 0.8 Y 0.9 C 2.0 E 1.35 AH3769Q Document number: DS38078 Rev. 2 - 2 12 of 13 www.diodes.com July 2015 © Diodes Incorporated AH3769Q Q PRELIMINARY - CONFIDENTIAL IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2015, Diodes Incorporated www.diodes.com AH3769Q Document number: DS38078 Rev. 2 - 2 13 of 13 www.diodes.com July 2015 © Diodes Incorporated