MUR805CT THRU MUR860CT GLASS PASSIVATED SUPER FAST RECTIFIERS PRODUCT SUMMARY Reverse Voltage 50 to 600 Volts Foward Current 8.0 Amperes FEATURES TO-220AB Superfast switching time for hight efficiency Low reverse leakage current High surge capacity MECHANICAL DATA Case: TO-220AB full molded plastic package Terminals: Lead solderable per MIL-STD-202, Method 208 Polarity: As marked Standard packaging: Any Weight: 0.08 ounces, 2.24 grams Pb-free; RoHS-compliant MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS o (Ratings at 25 C ambient temperature unless otherwise specified.) Parameter Symbol MUR805CT MUR810CT MUR820CT MUR840CT MUR860CT Unit Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 Volts Maximum RMS voltage VRMS 35 70 140 280 420 Volts Maximum DC blocking voltage V DC 50 100 200 400 600 Volts o Maximum average forward rectified current at TC=120 C IF(AV) 8.0 Amps Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 100.0 Amps Maximum instantaneous forward voltage at 4.0A per element VF Maximum DC reverse current at rated DC blocking voltage @TJ=25oC @TJ=100oC trr Operating junction and storage temperature range 2.8 10.0 800 IR Maximum reverse recovery time at IF=0.5A, IR=1.0A, Irr=0.25A Notes: 2.2 30 TJ, TSTG uA 50 -55 to +150 Volts nS o C 1. Pulse test: Pulse width 300 usec, Duty cycle 2% 03/07/2007 Rev.1.00 www.SiliconStandard.com 1 MUR805CT THRU MUR860CT RATINGS AND CHARACTERISTIC CURVES (TA = 25oC unless otherwise noted) Information furnished by Silicon Standard Corporation is believed to be accurate and reliable. However, Silicon Standard Corporation makes no guarantee or warranty, expressed or implied, as to the reliability, accuracy, timeliness or completeness of such information and assumes no responsibility for its use, or for infringement of any patent or other intellectual property rights of third parties that may result from its use. Silicon Standard reserves the right to make changes as it deems necessary to any products described herein for any reason, including without limitation enhancement in reliability, functionality or design. No license is granted, whether expressly or by implication, in relation to the use of any products described herein or to the use of any information provided herein, under any patent or other intellectual property rights of Silicon Standard Corporation or any third parties. 03/07/2007 Rev.1.00 www.SiliconStandard.com 2