AZ723 MINIATURE POWER RELAY FEATURES • • • • • • • • • AC coils Dielectric strength 5000 Vrms Low cost Flux tight package 8 Amp switching - double pole contacts Isolation spacing greater than 8mm Molded materials: all 94V-0 UL, CUR file E43203 TÜV file R50008783 CONTACTS GENERAL DATA Arrangement DPDT (2 Form C) Ratings Resistive load: Max. switched power: 240 W, 2216 VA Max. switched current: 8 A Max. switched voltage: 150 VDC/400 VAC Inductive load: (cosØ =0.4) Max. switched power: 90W or 500VA Max. Switched current: 5A Max. switched voltage: 125VDC or 400 VAC Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Rated Load UL, CUR TÜV 8 A 277 VAC, resistive 8 A 30 VDC resistive 1/3 HP 240 VAC 5 A at 250 VAC, resistive 5 A at 30 VDC, resistive Material Silver cadmium oxide Resistance 30 milliohms initially (6V, 1A method) COIL Power At Pickup Voltage (typical) Life Expectancy Mechanical Electrical Minimum operations 1 x 107 1 x 105 at 5 A 240 VAC Res. Operate Time (typical) 8 ms at nominal coil voltage Release Time (typical) 5 ms at nominal coil voltage (with no coil suppression) Dielectric Strength 5000 Vrms coil to contact (at sea level for 1 min.) 3000 Vrms between contact sets 1000 Vrms between open contacts Insulation Resistance 1000 megohms min. at 20°C, 500 VDC 50% RH Dropout Greater than 30% of nominal coil voltage Ambient Temperature Operating Storage At nominal coil voltage -40°C (-40°F) to 70°C (158°F) -40°C (-40°F) to 105°C (221°F) Vibration 0.062" DA at 10–55 Hz Shock 10 g Enclosure PC (94V-0) Terminals Tinned copper alloy, P.C. 576 mW Max. Solder Temp. 270°C (518°F) Max. Continuous Dissipation 1.5 W at 20°C (68°F) ambient 1.2 W at 40°C (104°F) ambient Max. Solder Time 5 seconds Temperature Rise 36°C (97°F) at nominal coil voltage Weight 17 grams Temperature Max. 105°C (221°F) NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. 8/21/02W AZ723 RELAY ORDERING DATA COIL SPECIFICATIONS - AC Coil Nominal Coil VAC 6 Must Operate VAC 4.8 ORDER NUMBER Max. Continuous VAC 7.8 Nominal Current mA ±10% 150.0 Coil Resistance ±10% 16 Form C (DPDT) AZ723-2C-6A 12 9.6 15.6 75.0 65 AZ723-2C-12A 24 19.2 31.2 37.5 260 AZ723-2C-24A 50 40.0 65.0 18.0 1130 AZ723-2C-50A 110 88.0 143.0 10.6 4600 AZ723-2C-110A 220 176.0 286.0 5.3 20200 AZ723-2C-220A 230 184.0 299.0 3.6 24900 AZ723-2C-230A HARDWARE ORDERING DATA DESCRIPTION ORDER NUMBER DESCRIPTION ORDER NUMBER Socket ST484–U1 Retainer ST482–2 MECHANICAL DATA ST484-U1 HARDWARE .500 (12.7) 1.28 (32.5) 1.22 (30.9) .023 (0.58) x .023 (0.58) .414 (10.5) 0.016 (0.4) x 0.040 (1.015) .354 (9.0) .177 (4.5) MAX PC BOARD LAYOUT .295 (7.5) .366 (9.3) .125 DIA (0.5) RETAINING CLIP .197 (5.0) .197 (5.0) .590 (15) .059 DIA (1.5) .118 (3.0) 1.217 (30.9) .158 (4.0) 1.044 (26.5) .138 (3.5) Viewed toward terminals ST482-2 Dimensions in inches with metric equivalents in parentheses. Tolerance: ±0.010" 8/21/02W