AVAGO MGA-30116 Watt high linearity amplifi er Datasheet

MGA-30116
150MHz – 1GHz
½ Watt High Linearity Amplifier
Data Sheet
Description
Features
Avago Technologies’ MGA-30116 is a high linearity ½ Watt
PA with good OIP3 performance and exceptionally good
PAE at p1dB gain compression point, achieved through
the use of Avago Technologies’ proprietary 0.25um GaAs
Enhancement-mode pHEMT process.
 High linearity and P1dB
The adjustable temperature compensated internal bias
circuit allowed the device to be operated at either class A
or class AB operation
 Built in adjustable temperature compensated internal
bias circuitry
 GaAs E-pHEMT Technology [1]
 Standard QFN 3X3 package
 5V supply
 Excellent uniformity in product specifications
The MGA-30116 is housed inside a standard 16 pin QFN
3X3 package.
 Tape-and-Reel packaging option available
Applications
 High MTTF for base station application
 Class A driver amplifier for GSM/CDMA Base Stations.
Specifications
 General purpose gain block.
900MHz; 5V, 202.8mA (typical)
 17.0 dB Gain
Component Image
 44.1 dBm Output IP3
16 pins QFN 3x3
Vg 15
RFgnd 16
 27.7 dBm Output Power at 1dB gain compression
 47.0% PAE at P1dB
 2.0 dB Noise Figure
NC 12
1 Vm
VDD/RFout 11
2 Vbias
GND
VDD/RFout 10
3 RF in
NC 9
4 NC
5 NC
6 NC
7 GND
8 NC
TOP VIEW
GND 14
NC 13
30116
YYWW
XXXX
 MSL-1 and Lead-free
Notes:
1. Enhancement mode technology employs positive gate voltage,
thereby eliminating the need of negative gate voltage associated
with conventional depletion mode devices.
nc = not connected
BOTTOM VIEW
Notes:
Package marking provides orientation and identification
“30116” = Device Part Number
“YYWW” = Work Week and Year of manufacture
“XXXX” = Last 4 digit of Lot number
Attention: Observe precautions for
handling electrostatic sensitive devices.
ESD Machine Model = 60 V
ESD Human Body Model = 300 V
Refer to Avago Application Note A004R:
Electrostatic Discharge, Damage and Control.
Absolute Maximum Rating [1] TA=25C
Symbol
Parameter
Units
Absolute Max.
Vdd,max
Device Voltage, RF output to ground
V
5.5
Ids,max
Device Drain Current
mA
400
Vctrl,max
Control Voltage
V
5.5
Pin,max
CW RF Input Power
dBm
22
Pdiss
Total Power Dissipation [3]
W
2.2
Tj, max
Junction Temperature
C
150
TSTG
Storage Temperature
C
-65 to 150
Thermal Resistance [2] jc = 33 C/W (Vdd=5, Ids=200mA, Tc=85C)
Notes:
1. Operation of this device in excess of any of these limits may cause permanent damage.
2. Thermal resistance measured using Infra-Red measurement technique.
3. This is limited by maximum Vdd and Ids. Derate 30.3mW/ C for Tc> 77.5 C.
Electrical Specifications [4]
TA = 25C, Vdd =5V, Vctrl =5V, RF performance at 900 MHz, measured on demo board (see Fig. 7) unless otherwise
specified.
Symbol
Parameter and Test Condition
Units
Min.
Typ.
Max.
Ids
Quiescent current
mA
165
202.8
240
Ictrl
Vctrl current
mA
-
7
-
Gain
Gain
dB
15.5
17.0
18.5
OIP3 [5]
Output Third Order Intercept Point
dBm
41
44.1
-
OP1dB
Output Power at 1dB Gain Compression
dBm
26.2
27.7
-
PAE
Power Added Efficiency
%
-
47.0
-
NF
Noise Figure
dB
-
2.0
-
S11
Input Return Loss, 50Ω source
dB
-
-14
-
S22
Output Return Loss, 50Ω load
dB
-
-14
-
S12
Reverse Isolation
dB
-
-23.5
-
Notes:
4. Measurements at 900MHz obtained using demo board described in Figure 6 and 7.
5. 900 MHz OIP3 test condition: FRF1 - FRF2 = 10MHz with input power of -5dBm per tone measured at worse side band
6. Use proper biasing, heat sink and de-rating to ensure maximum channel temperature is not exceeded. See absolute maximum ratings and
application note (if applicable) for more details.
2
Product Consistency Distribution Charts [1,2]
CPK = 2.209
Stdev = 5.612
Figure 1. Ids at 900MHz; LSL=165mA, nominal =202.8mA, USL=240mA
CPK = 1.645
stdev = 0.628
Figure 2. OIP3 at 900MHz; LSL=41dB, nominal=44.1dBm
CPK = 27.78
Stdev = 0.018
Figure 3. P1dB at 900MHz; LSL, 26.2dBm, nominal=27.7dBm
stdev =0.187
Figure 4. PAE at P1dB 900MHz; nominal=47.0%
CPK = 6.858
Stdev = 0.0729
Figure 5. Gain at 900MHz; LSL=15.5dB, Nominal =17.0dB, USL=18.5dB,
Notes:
1. Distribution data sample size is 500 samples taken from 2 different wafer lots and 3 different wafers. Future wafers allocated to this product may
have nominal values anywhere between the upper and lower limits.
2. Measurements were made on a characterization test board, which represents a trade-off between optimal OIP3, gain, P1dB and PAE. Circuit trace
losses have not been de-embedded from measurements above.
3
Demo Board (750MHz to 1GHz)
Vctrl
Vdd
L4
C10
Rbias
NC
1
12
Vdd
RFout
2
11
C4
3
10
NC
NC
4
9
RFout
L2
8
NC
7
GND
6
NC
NC
C2
5
C3
L1
C11
Vdd
RFout
RFin
RFin
C9
L3
Vm
Vbias
C1
C8
13
NC
14
GND
15
Vg
C7
16
RFgnd
C6
Top View
Figure 6. Demo board and application schematic (750MHz to 1GHz)
Demo Board Part List
Circuit Symbol
Size
Value
Part Number
Description
L1
0402
10nH
LLP1005-FH10NC (TOKO)
MLC Inductor
L2
0402
6.8nH
LLP1005-FH6N8C (TOKO)
MLC Inductor
L3
0402
8.2nH
LL1005-FHL8N2J (TOKO)
MLC Inductor
L4
0402
15nH
MLK1005S15NJ (TDK)
MLC Inductor
C1
0402
6pF
C1005C0G1H060D (TDK)
Ceramic Chip Capacitor
C2
0402
1.8pF
GRM1555C1H1R8CZ01B (Murata)
Ceramic Chip Capacitor
C3
0402
4.3pF
GRM1555C1H4R3CZ01B (Murata)
Ceramic Chip Capacitor
C4
0402
5.6pF
GRM1555C1H5R6CZ01B (Murata)
Ceramic Chip Capacitor
C6
0402
100pF
GRM1555C1H101JZ01B (Murata)
Ceramic Chip Capacitor
C7
0402
0.1uF
GRM155R71E103KA01B (Murata)
Ceramic Chip Capacitor
C8
0402
100pF
GRM1555C1H101JZ01B (Murata)
Ceramic Chip Capacitor
C9
0805
2.2uF
GRM21BR61E225KA12L (Murata)
Ceramic Chip Capacitor
C10
0402
100pF
GRM1555C1H101JZ01B (Murata)
Ceramic Chip Capacitor
C11
0402
100pF
GRM1555C1H101JZ01B (Murata)
Ceramic Chip Capacitor
Note: Rbias is used to lower the quiescent current. Default is 0 ohm
4
Figure 7. Demo board Layout
 Recommended PCB material is 10 mils Rogers RO4350, with FR4 backing for mechanical strength.
 Suggested component values may vary according to layout and PCB material.
MGA-30116 Typical Performance (750MHz to 1GHz)
250
240
230
220
210
200
190
180
170
160
150
0.75
OIP3 (dB)
Ids (mA)
TA = +25C, Vdd = 5V, Vctrl =5V, Input Signal=CW unless stated otherwise.
85ºC
25ºC
-40ºC
0.8
0.85
0.9
Frequency (GHz)
Figure 8. Over Temperature Ids vs Frequency
5
0.95
1
48
47
46
45
44
43
42
41
40
39
38
0.75
85ºC
25ºC
-40ºC
0.8
0.85
0.9
Frequency (GHz)
Figure 9. Over Temperature OIP3 vs Frequency
0.95
1
MGA-30116 Typical Performance (750MHz to 1GHz)
TA = +25C, Vdd = 5V, Vctrl =5V, Input Signal=CW unless stated otherwise.
31
30
Gain (dB)
P1dB (dBm)
29
28
27
26
85ºC
25ºC
-40ºC
25
24
0.75
0.8
0.85
0.9
Frequency (GHz)
0.95
1
S22 (dB)
S11 (dB)
85ºC
25ºC
-40ºC
0.8
0.85
0.9
Frequency (GHz)
0.95
1
0.85
0.9
Frequency (GHz)
0.95
1
85ºC
25ºC
-40ºC
0.8
0.85
0.9
Frequency (GHz)
Figure 13. Over Temperature S22 vs Frequency
0.95
1
-25
-30
-35
0.8
0.85
0.9
Frequency (GHz)
0.95
-40
-45
-50
3GPP WCDMA
Test
Test Model
Model
1+64DPCH
1+64DPCH
+/- 5MHz Offset
-55
85ºC
25ºC
-40ºC
Figure 14. Over Temperature S12 vs Frequency
6
0.8
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
0.75
ACPR (dBC)
S12 (dB)
Figure 12. Over Temperature S11 vs Frequency
-20
-21
-22
-23
-24
-25
-26
-27
-28
-29
-30
0.75
85ºC
25ºC
-40ºC
Figure 11. Over Temperature Gain vs Frequency
Figure 10. Over Temperature P1dB vs Frequency
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
0.75
20
19
18
17
16
15
14
13
12
11
10
0.75
-60
1
-65
15
16
17
18
19
20
21
22
Output Channel Power (dBm)
Figure 15. Over Temperature ACPR (900MHz) Vs Pout
85ºC
25ºC
-40ºC
23
24
S-Parameter (Vdd = 5V, Vctrl = 5V, T=25°C, unmatched 50 ohm)
freq (GHz)
S11 (dB)
S11 (ang)
S21 (dB)
S21 (ang)
S12 (dB)
S12 (ang)
S22 (dB)
S22 (ang)
0.1
0.819
-66.87
36.25
135.3
0.01439
56.48
0.351
-106.5
0.2
0.6424
-106.1
23.96
113.3
0.02695
48.02
0.4369
-140.2
0.3
0.5681
-130.9
17.2
101.3
0.03032
42.92
0.4617
-155.3
0.4
0.5316
-147
13.32
92.88
0.03406
41.9
0.4729
-164.7
0.5
0.5116
-159.1
10.8
86.62
0.03866
42.74
0.4766
-171.1
0.6
0.5009
-168.6
9.069
81.19
0.0432
42.68
0.4793
-176.5
0.7
0.4943
-176.6
7.799
76.55
0.04839
41.84
0.4773
179.4
0.8
0.4905
176.6
6.861
72.06
0.0529
41.61
0.4778
175.7
0.9
0.4873
170.4
6.112
68.09
0.0576
40.96
0.476
172
1
0.4857
164.9
5.514
64.13
0.06263
39.99
0.4748
169
1.5
0.4835
142.2
3.737
46.16
0.08796
31.73
0.4576
155.1
2
0.4751
123.8
2.85
28.84
0.116
20.17
0.4279
141.7
2.5
0.4638
108.1
2.356
11.91
0.1442
7.589
0.3851
128.2
3
0.4474
93.43
2.038
-5.352
0.1734
-6.182
0.3323
112.6
3.5
0.433
78.93
1.808
-23.21
0.2033
-21.36
0.2701
93.95
4
0.429
64.65
1.624
-41.21
0.2311
-37.08
0.2136
69.63
4.5
0.4433
48.8
1.456
-60.71
0.2561
-54.46
0.1842
35.57
5
0.4797
33.04
1.299
-79.6
0.2706
-71.5
0.1845
-0.1869
5.5
0.5308
17.84
1.145
-98.31
0.2812
-88.72
0.1949
-28.5
6
0.5849
4.304
0.9923
-117
0.28
-105.5
0.1758
-50.71
6.5
0.6311
-6.453
0.8475
-134.2
0.2682
-121.8
0.09589
-63.29
7
0.6711
-15.37
0.6847
-151.2
0.25
-136.4
0.1006
46.42
7.02
0.6718
-15.54
0.6791
-151.4
0.2488
-136.8
0.1055
47.03
7.5
0.702
-22.92
0.5296
-161.9
0.2195
-145.6
0.3269
34.85
8
0.7192
-30.47
0.4375
-163.6
0.2083
-148.2
0.5113
11.84
8.5
0.7036
-38.8
0.4401
-164
0.2316
-150.2
0.5983
-9.504
9
0.6344
-44.46
0.4975
-172.7
0.2788
-159.9
0.5515
-29.89
9.5
0.623
-48.02
0.4827
163.9
0.2918
176.7
0.4055
-20.64
10
0.6313
-59.65
0.3887
164.1
0.2573
176.4
0.5668
-27.29
10.5
0.5825
-75.16
0.445
162.5
0.3127
172.2
0.5751
-46.67
11
0.5164
-91.87
0.5292
151.8
0.3834
161.5
0.5242
-66.71
11.5
0.4614
-109.1
0.6084
136.6
0.4587
145.2
0.4551
-90.35
12
0.4244
-125.4
0.668
119
0.5192
126.1
0.3841
-118.8
12.5
0.4056
-142.1
0.6845
101.1
0.5644
107.3
0.2985
-144.4
13.5
0.385
-156.5
0.7347
84.24
0.6157
90.41
0.3366
-168.2
14
0.3726
-176
0.7055
49.21
0.6262
53.26
0.4046
138
14.5
0.3731
166.5
0.736
33.92
0.6716
36.92
0.3906
113.9
15
0.3205
148.6
0.7673
16.35
0.7162
18.91
0.3296
95.44
15.5
0.2225
132.8
0.8008
-3.142
0.7613
-1.432
0.2269
86.25
16
0.08651
165.7
0.8194
-25.57
0.7898
-24.97
0.1099
119.9
16.5
0.2734
-144.7
0.776
-51.48
0.7658
-52.01
0.2566
174.7
17
0.5265
-164
0.6454
-76.43
0.6397
-78.62
0.5016
168
17.5
0.6917
176.9
0.4937
-95.96
0.5045
-99.26
0.6825
155.3
18
0.778
164.8
0.3822
-108.9
0.3851
-112.5
0.7874
146.4
18.5
0.8257
157.3
0.3054
-118.3
0.316
-122.4
0.8485
140.4
19
0.8475
153.3
0.2549
-124.5
0.261
-128.5
0.8782
137
19.5
0.8593
151.2
0.2233
-128.9
0.2331
-134.3
0.8881
134.9
20
0.8592
150.1
0.2099
-132.6
0.2211
-137.5
0.8915
133.4
Note: Circuit layout refer to Figure 16.
7
S-Parameter Test circuit
Vdd
NC
13
GND
14
Vg
15
Vdd
RFout
11
RFin
3
Vdd
RFout
10
NC
4
NC
9
Reference Plane
NC
8
Vbias
2
GND
7
NC
12
NC
5
J1
RFin
Vm
1
NC
6
11612A
Bias Network
45 MHZ-26.5 GHz
RFgnd
16
Vg
Reference Plane
Top View
Figure 16. S-Parameter Test circuit.
8
11612A
Bias Network
45 MHZ-26.5 GHz
J2
RFout
S-Parameter (Vdd = 5V, Vctrl = 5V, T=25°C, unmatched 50 ohm), with L4 = 15nH, C6 = 100pF
freq (GHz)
S11 (dB)
S11 (ang)
S21 (dB)
S21 (ang)
S12 (dB)
S12 (ang)
S22 (dB)
S22 (ang)
0.1
0.2568
161.2
13.78
175.8
0.009444
101.7
0.2746
-34.24
0.2
0.1672
164.7
15.64
160.5
0.01771
93.57
0.4101
-66.49
0.3
0.1339
-153.1
16.74
141.1
0.02985
83.91
0.5896
-96.1
0.4
0.2804
-144.2
14.9
117.7
0.03976
67.74
0.6465
-126.2
0.5
0.3701
-158.3
12.01
102.7
0.04382
57.22
0.6219
-144.3
0.6
0.4127
-169.5
9.849
92.68
0.04783
54.35
0.5948
-155.9
0.7
0.434
-178.1
8.307
85.46
0.05033
50.56
0.5741
-164.1
0.8
0.4476
174.6
7.201
79.36
0.05531
48.96
0.5571
-170.5
0.9
0.456
168.5
6.349
74.28
0.05979
46.76
0.5467
-176
1
0.4621
162.9
5.684
69.52
0.06393
44.7
0.537
179.6
1.5
0.474
140.1
3.742
49.18
0.0896
34.64
0.5022
161.6
2
0.4713
122.3
2.861
31.48
0.1158
22.85
0.4649
146.8
2.5
0.4595
106.4
2.36
14.01
0.1449
9.838
0.4205
132.1
3
0.4391
93.36
2.029
-3.058
0.1725
-3.918
0.3676
116.7
3.5
0.43
78.17
1.806
-21.48
0.2036
-19.57
0.301
96.73
4
0.416
64.62
1.611
-40.19
0.2316
-35.9
0.2393
71.35
4.5
0.4298
53.2
1.464
-57
0.2534
-51.13
0.2033
41.6
5
0.4771
36.4
1.298
-78.1
0.2707
-70.57
0.1884
1.547
5.5
0.529
21.01
1.14
-97.23
0.2796
-87.99
0.185
-29.27
6
0.5852
7.048
0.9772
-116.3
0.2741
-105
0.1468
-54.03
6.5
0.6344
-4.632
0.8161
-134.1
0.2564
-121.2
0.04241
-50.92
7
0.6793
-14.22
0.6446
-149.4
0.2351
-133.6
0.1712
53.21
7.5
0.7121
-22.65
0.4994
-157.8
0.2102
-140.4
0.3948
31.35
8
0.7198
-30.56
0.4489
-158.4
0.2158
-142.5
0.5287
6.43
8.5
0.7155
-37.25
0.3997
-161.6
0.2157
-147.8
0.6248
-6.672
9
0.6895
-44.03
0.4167
-163.8
0.242
-151.7
0.6518
-21.27
9.5
0.6597
-51.88
0.4662
-169.9
0.287
-159.2
0.6371
-34.6
10
0.6101
-61.74
0.5308
179.8
0.3463
-169.5
0.596
-47.68
10.5
0.5423
-73.63
0.6054
167.2
0.4186
176.2
0.5318
-63.41
11
0.4595
-87.08
0.6852
149.4
0.4918
159.2
0.4226
-81.47
11.5
0.404
-98.92
0.7138
132
0.5402
140.2
0.359
-100.4
12
0.3637
-116.4
0.744
115.6
0.5821
121.9
0.3031
-125.5
12.5
0.3447
-131.9
0.767
97.51
0.623
103.1
0.2751
-154.6
13
0.3432
-151
0.784
79.81
0.6501
85.67
0.2787
176.6
13.5
0.3322
-171
0.7906
61.96
0.6802
67.27
0.3048
151.7
14
0.2999
170.4
0.776
43.77
0.6889
48.08
0.3259
133.6
14.5
0.2504
155.7
0.7477
27.31
0.6811
30.17
0.3555
116
15
0.211
147.3
0.7599
13.03
0.7052
15.74
0.3124
93.28
15.5
0.1448
140
0.8115
-5.748
0.7699
-3.878
0.1677
81.45
16
0.1042
-155.1
0.8283
-28.92
0.8003
-28.21
0.09555
169
16.5
0.3274
-145.4
0.769
-55.06
0.7618
-55.63
0.3365
-176.2
17
0.5576
-166.2
0.6286
-79.44
0.6235
-81.61
0.5759
169.1
17.5
0.7072
175.6
0.4753
-97.98
0.4856
-101.6
0.7331
155.1
18
0.7852
164.1
0.3653
-109.8
0.3679
-113.4
0.8093
146.1
18.5
0.8251
157
0.2913
-117.8
0.3018
-122.1
0.8536
140.4
19
0.844
153.6
0.2531
-123
0.2596
-127.1
0.877
137.2
19.5
0.8577
151.5
0.2235
-128.5
0.2327
-133.7
0.8891
135.3
20
0.8584
150.2
0.2104
-132
0.2192
-137.1
0.8957
133.5
Note: Circuit layout refer to Figure 17, with L4 = 15 nH, C6 = 100pF
9
S-Parameter (Vdd = 5V, Vctrl = 5V, T=25°C,unmatched 50 ohm), with L4 = 100nH, C6 = 1nF
freq (GHz)
S11 (dB)
S11 (ang)
S21 (dB)
0.1
0.5555
10.29
35.34
174.2
0.01595
110.7
0.4953
-65.36
0.2
0.5652
-85.53
27.11
125.1
0.02909
57.57
0.5617
-125.6
0.3
0.5267
-124
18.44
106.2
0.03285
48.87
0.5286
-148
0.4
0.508
-144.3
13.83
95.53
0.03656
46.17
0.5126
-160.7
0.5
0.4988
-157.9
11.03
88.31
0.04119
45.19
0.5023
-168.4
0.6
0.4939
-168.1
9.165
82.26
0.04457
44.09
0.4972
-174.9
0.7
0.491
-176.3
7.837
77.29
0.04883
43.54
0.49
-179.7
0.8
0.4886
176.9
6.869
72.51
0.05316
42.65
0.4852
176.2
0.9
0.4882
170.7
6.104
68.36
0.05725
41.06
0.4794
172.2
1
0.4864
164.6
5.426
63.68
0.06378
39.49
0.474
168.2
1.5
0.4837
142.8
3.708
45.42
0.08746
30.28
0.4467
153.3
2
0.4758
124.9
2.815
27.12
0.1145
18.41
0.3984
138.4
2.5
0.4643
110.1
2.305
8.764
0.1405
3.984
0.3289
123.2
3
0.4577
97.19
1.953
-9.91
0.161
-10.33
0.2475
106.1
3.5
0.4543
83.77
1.654
-30
0.1863
-26.26
0.1208
86.57
4
0.4629
71.65
1.32
-49.22
0.1997
-44.31
0.03653
-178
4.5
0.5275
55.55
1.034
-60.21
0.1803
-56.57
0.1689
165.4
5
0.5184
35.23
1.154
-72.72
0.2383
-64.62
0.1434
60.22
5.5
0.5989
22.32
0.8585
-95.63
0.2059
-84.56
0.1319
130.6
6
0.657
5.12
0.7102
-103.2
0.2058
-88.56
0.303
76.52
6.5
0.6875
-8.43
0.6763
-112.5
0.228
-98.33
0.4378
37.31
7
0.7137
-18.74
0.6198
-123.6
0.2438
-109.7
0.5354
14.7
7.5
0.7241
-27.56
0.5931
-133.6
0.2581
-120.6
0.602
-4.645
8
0.718
-34.72
0.5767
-143.5
0.2772
-131.7
0.619
-19.73
8.5
0.691
-40.68
0.574
-156
0.2962
-145
0.5626
-31.17
9
0.681
-46.15
0.5259
-162
0.294
-151.2
0.597
-34.04
9.5
0.6393
-53.84
0.585
-170.5
0.347
-160.2
0.5657
-48.44
10
0.5788
-62.6
0.6443
176.5
0.4063
-172.9
0.4858
-60.16
10.5
0.5028
-72.36
0.6962
161.6
0.4677
171.4
0.3994
-71.89
11
0.4265
-84.11
0.7372
145.1
0.5198
155.6
0.3199
-85.13
11.5
0.3683
-97.04
0.7685
128.3
0.574
137.7
0.2552
-104.2
12
0.335
-117
0.7789
112.7
0.6045
120.7
0.2232
-123.8
12.5
0.291
-137.5
0.8156
95.6
0.6712
102.2
0.2332
-159.9
13
0.2902
-156.5
0.8394
77.54
0.7033
83.72
0.2479
164.5
13.5
0.2995
-175.6
0.8415
59.73
0.728
65.05
0.2676
137.2
14
0.2998
166.6
0.8388
42.03
0.7442
46.45
0.2708
117.2
14.5
0.2813
150.2
0.8378
24.27
0.7641
27.53
0.2565
102
15
0.2247
137
0.8449
5.782
0.7925
8.6
0.1958
85.32
15.5
0.1216
146.5
0.8498
-15
0.8132
-13.14
0.06727
93.91
16
0.1879
-152.9
0.8167
-38.64
0.7948
-37.8
0.1754
-166.3
16.5
0.4125
-159.5
0.7132
-62.79
0.711
-63.33
0.4122
-179
17
0.6075
-175.1
0.5777
-84.42
0.5747
-86.65
0.618
166.5
17.5
0.7305
170.5
0.4383
-100.8
0.4495
-104.4
0.7513
153.2
18
0.795
161.6
0.3427
-111.1
0.3447
-114.9
0.8168
144.9
18.5
0.8315
156
0.2809
-119.2
0.2901
-123.2
0.8596
139.9
19
0.8501
152.7
0.2379
-124.7
0.2442
-128.7
0.8821
136.6
19.5
0.8572
150.8
0.2114
-129.4
0.2222
-134.3
0.8914
134.5
20
0.8568
149.6
0.2022
-132.8
0.2114
-137.5
0.8967
133.1
Note: Circuit layout refer to Figure 17, with L4 = 100 nH, C6 = 1nF
10
S21 (ang)
S12 (dB)
S12 (ang)
S22 (dB)
S22 (ang)
S-Parameter Test circuit (400MHz – 700 MHz)
Vctrl
Vdd
L4 = 15nH
C10 =
100pF
NC
12
Vbias
2
Vdd
RFout
11
RFin
3
Vdd
RFout
10
NC
8
9
GND
7
NC
4
NC
6
NC
Reference Plane
Reference Plane
TOP VIEW
Figure 17. S-Parameter Test Circuit.
11
11612A
Bias Network
45 MHZ-26.5 GHz
NC
13
GND
14
Vg
15
Vm
1
NC
5
J1
RFin
RFgnd
16
Rbias
=0 ohm
C6 = 100pF
J2
RFout
Demo Board (400MHz to 700MHz)
Vctrl
Vdd
L4
C7
R2
C5
R1
L3
Vm
NC
1
12
Vdd
RFout
Vbias
2
C1
J1
RFin
C4
13
NC
14
GND
15
Vg
C3
16
RFgnd
C6
11
C2
J2
RFout
Vdd
RFout
RFin
3
10
NC
NC
4
9
8
NC
7
GND
6
NC
NC
L1
5
L2
Top View
Figure 18. Demo board and application schematic (400MHz to 700 MHz)
Demo Board Part List (400MHz to 700MHz)
Circuit
Symbol
Value
Part Number
C1
10 pF
Murata GRM155 series
C2
10p
Murata GRM155 series
C3
1 nF
Murata GRM155 series
C4
100 nF
Murata GRM155 series
C5
1 nF
Murata GRM155 series
C6
1 nF
Murata GRM155 series
C7
1 nF
Murata GRM155 series
J1
142-0701-841
Johnson edge launch SMA female
J2
142-0701-841
Johnson edge launch SMA female
L1
22 nH
Toko LL1005 series
L2
15 nH
Toko LL1005 series
L3
100 nH
Toko LL1005 series
L4
100 nH
Toko LL1005 series
Q1
Mga30116
R1
0R
Figure 19. Demo board Layout for 400MHz to 700MHz
R2
390 R
Notes:
1. Recommended PCB material is 10 mils Rogers RO4350, with FR4
backing for mechanical strength.
2. Suggested component values may vary according to layout and PCB
material.
12
MGA-30116 Typical Performance (400MHz to 700MHz)
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
-40°C
25°C
85°C
S12(dB)
S11(dB)
TA = +25°C, Vdd = 5V, Vctrl =5V, Input Signal=CW unless stated otherwise.
0.40
0.45
0.50
0.55
0.60
Frequency (GHz)
0.65
0.70
0.50
0.55
0.60
Frequency (GHz)
0.65
0.70
20
18
16
0.45
0.50
0.55
0.60
Frequency (GHz)
0.65
14
12
-40°C
25°C
85°C
10
-40°C
25°C
85°C
8
6
0.70
Figure 22. Over Temperature S22 vs Frequency
0.4
0.45
0.5
0.55
0.6
Frequency (GHz)
0.65
0.7
Figure 23. Over Temperature Gain vs Frequency
31
46
30
44
42
29
28
OiP3 (dB)
P1dB (dB)
0.45
Figure 21. Over Temperature S12 vs Frequency
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
-20
0.40
27
26
-40°C
25°C
85°C
25
0.4
0.45
0.5
0.55
Frequency (GHz)
Figure 24. Over Temperature P1dB vs Frequency
0.6
0.65
40
38
36
34
-40°C
25°C
85°C
32
24
13
-40°C
25°C
85°C
0.40
Gain (dB)
S22(dB)
Figure 20. Over Temperature S11 vs Frequency
-20
-21
-22
-23
-24
-25
-26
-27
-28
-29
-30
0.7
30
0.4
0.45
0.5
0.55
Frequency (GHz)
Figure 25. Over Temperature OIP3 vs Frequency
0.6
0.65
0.7
PCB Layout and Stencil Design
0.490
Chamfer 0.24
0.325
0.500
Chamfer 0.192
Chamfer 0.06
0.500
∅0.260
0.560
1.240
1.550
0.210
0.325
0.230
0.500
0.490
0.350
1.240
1.550
PCB Land Pattern
(Top View)
Stencil Outline
0.500
0.230
1.240
1.550
0.210
0.360
1.240
1.550
Combined PCB & Stencil Layouts
Notes:
1. All dimensions are in milimeters.
Part Number Ordering Information
Product Family
Part Number
No. of Devices
Container
MGA-30116-TR1G
1000
MGA-30116-TR2G
3000
MGA-30116-BLKG
100
Frequency Band
7” Reel
Output
Power
700MHz-1GHz
1.7- 2.7GHz
3.3-3.9GHz
13” Reel
0.5W
MGA-30116
MGA-30216
MGA-30316
1W
ALM-31122
ALM-31222
ALM-31322
2W
ALM-32120
ALM-32220
ALM-32320
antistatic bag
Note: MGA-30116 operates from 400MHz to 1GHz.
14
Package Dimensions
0.20 Ref
Pin 1 Dot
by marking
PIN #1 IDENTIFICATION
CHAMFER 0.30 X 45°
1.55±0.05
Exp.DAP
3.00 ± 0.10
0.40±0.05
0.50 Bsc
30116
Y Y WW
XXXX
3.00 ± 0.10
1.55±0.05
Exp.DAP
0.23±0.05
0.00 ± 0.05
1.50
Ref.
0.85 ± 0.05
TOP VIEW
BOTTOM VIEW
SIDE VIEW
Notes:
1. All dimensions are in milimeters
2. Dimensions are inclusive of plating
3. Dimensions are exclusive of mold flash and metal burr
Device Orientation
REEL
USER FEED DIRECTION
CARRIER
TAPE
30116
YYXX
XXXX
30116
YYXX
XXXX
30116
YYXX
XXXX
TOP VIEW
USER FEED
DIRECTION
END VIEW
COVER TAPE
Tape Dimensions
2.0 ±0.1[1]
0.3 ±0.05
4.0 ±0.1[2]
1.75 ±0.1
1.55 ±0.05
5.5 ±0.1[1]
CL
3.3 ±0.1
1.6 ±0.1
12.0 ±0.3
R 0.3
Typical
1.55 ±0.1
8.0 ±0.1
Notes:
1. Measured from centerline of sprocket hole to centerline of pocket
2. Cumulative tolerance of 10 sprocket holes is ± 0.20
3. All dimensions in millimeter unless otherwise stated
15
3.3±0.1
Reel Dimensions - 7 inch
6.25mm EMBOSSED LETTERS
LETTERING THICKNESS: 1.6mm
SLOT HOLE "a"
SEE DETAIL "X"
Ø178.0±0.5
SLOT HOLE "b"
FRONT
BACK
6
PS
SLOT HOLE(2x)
180° APART.
6
PS
RECYCLE LOGO
SLOT HOLE "a": 3.0±0.5mm(1x)
SLOT HOLE "b": 2.5±0.5mm(1x)
FRONT VIEW
45°
+0.5
Ø13.0 -0.2
Ø20.2 MIN.
°
R10.65
120
65°
1.5 MIN.
+1.5*
12.4
-0.0
R5.2
BACK VIEW
Ø178.0±0.5
Ø51.2±0.3
18.0*
MAX.
SEE DETAIL "Y"
DETAIL "X"
3.5
DETAIL "Y"
(Slot Hole)
1.0
Ø55.0±0.5
45°
EMBOSSED RIBS
RAISED: 0.25mm, WIDTH: 1.25mm
16
BACK
Ø178.0±0.5
FRONT
Reel Dimensions - 13 inch
11
12 1
2
3
4
0 2
10
9
7
6
5
DATE CODE
12MM
8
EMBOSSED LETTERING
16.0mm HEIGHT x MIN. 0.4mm THICK.
Ø329.0±1.0
HUB
Ø100.0±0.5
6
PS
02
12
12
10
911
876534
MP
N
CPN
EMBOSSED LETTERING
7.5mm HEIGHT
EMBOSSED LETTERING
7.5mm HEIGHT
1.5
(MI
N.)
FRONT VIEW
EMBOSSED LINE (2x)
89.0mm LENGTH LINES 147.0mm
AWAY FROM CENTER POINT
+0.5
-0.2
20.2(MIN.)
Ø13.0
11.9-15.4**
+2.0*
12.4
-0.0
Ø16.0
ESD LOGO
6
PS
RECYCLE LOGO
Detail "X"
SEE DETAIL "X"
Ø100.0±0.5
Ø329.0±1.0
6
PS
R19.0±0.5
BACK VIEW
SLOT
5.0±0.5(3x)
Ø12.3±0.5(3x)
For product information and a complete list of distributors, please go to our web site:
18.4 MAX.*
www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2012 Avago Technologies. All rights reserved.
AV02-1063EN - March 13, 2012
Similar pages