Double Balanced Mixer Model M57T RF Band RF 10 to 1500 MHz Electrical Specifications : (1) Conditions Parameter SSB Conversion loss:(2) Isolation LO to RF: RF (MHz) LO (MHz) 10-1000 10-1000 10-1500 10-1500 Desensitization Point: Input Third Order Intercept Point: LO Power: (3) Min 35 30 30 25 10-500 500-1500 10-500 500-1500 LO to IF: Input 1 dB Compression Point: Specifications IF (MHz) DC-500 DC-1000 Typical 7.5 dB 8.5 dB Max 8.0 dB 9.5 dB dB dB dB dB 10-1500 10-1500 DC-1000 +17 dBm 10-1500 10-1500 DC-1000 +15 dBm 10-1500 10-1500 DC-1000 +27 dBm 10-1500 10-1500 DC-1000 +23 dBm Notes: 1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system at +25˚C with the nominal LO power. Specifications indicated as typical are not guaranteed. 2. SSB Noise figure is nominally within ±0.5 dB of the SSB conversion loss for IF frequencies greater than 10 MHz. 3. Usable LO drives are up to 2 dB below and 3 dB above nominal. Typical Performance at 25˚C M57T Outline: TO-8 SPECTRUM All dimensions are in inches and [mm]. Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, FL 32905 · PH (888) 553-7531 · Fax (888) 553-7532 www.SpectrumMicrowave.com Spectrum Microwave · 2707 Black Lake Place · Philadelphia, PA 19154 · PH (215) 464-4000 · Fax (215) 464-4001