Surface Mount LRPS-2-25J+ LRPS-2-25J Power Splitter/Combiner 2 Way-0° 50Ω 1700 to 2500 MHz Maximum Ratings Operating Temperature Features • low insertion loss, 0.8 dB typ. • good isolation, 20 dB typ. • aqueous washable • J-leads for strain relief and excellent solderability -40°C to 85°C Storage Temperature -55°C to 100°C Power Input (as a splitter) Internal Dissipation 1W max. 0.125W max. 6 4 PORT 2 The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications • PCS • DCS • ISM • communications systems Pin Connections PORT 1 +RoHS Compliant Applications Permanent damage may occur if any of these limits are exceeded. SUM PORT Electrical Specifications 3 GROUND CASE STYLE: QQQ569 1,2,5 Outline Drawing FREQ. RANGE (MHz) ISOLATION (dB) INSERTION LOSS (dB) ABOVE 3.0 dB PHASE UNBALANCE (Degrees) AMPLITUDE UNBALANCE (dB) fL-fU Typ. Min. Typ. Max. Max. Max. 10 0.9 1700-2500 20 16 0.8 1.3 Typical Performance Data Frequency (MHz) PCB Land Pattern Suggested Layout, Tolerance to be within ±.002 Outline Dimensions ( inch mm ) C .225 5.72 D .060 1.52 E --- H .420 10.67 J .120 3.05 K .060 1.52 L .100 2.54 M --- F .100 2.54 Demo Board MCL P/N: TB-100 Suggested PCB Layout (PL-057) Isolation (dB) Phase Unbalance (deg.) VSWR S VSWR 1 VSWR 2 S-1 S-2 1700.00 1732.00 1764.00 1828.00 1892.00 3.55 3.55 3.54 3.53 3.52 3.45 3.45 3.45 3.46 3.46 0.10 0.10 0.09 0.07 0.07 17.17 17.52 17.89 18.73 19.69 1.63 1.55 1.53 1.43 1.24 1.43 1.40 1.38 1.35 1.31 1.14 1.13 1.13 1.12 1.12 1.15 1.16 1.17 1.19 1.21 1956.00 2020.00 2084.00 2148.00 2212.00 3.52 3.53 3.53 3.55 3.56 3.47 3.48 3.49 3.51 3.54 0.05 0.05 0.04 0.04 0.02 20.83 22.18 23.91 26.14 29.31 1.13 0.94 0.75 0.50 0.34 1.28 1.26 1.25 1.25 1.25 1.12 1.12 1.11 1.12 1.12 1.25 1.27 1.30 1.33 1.36 2276.00 2340.00 2404.00 2468.00 2500.00 3.59 3.63 3.68 3.74 3.77 3.57 3.61 3.65 3.70 3.73 0.03 0.03 0.03 0.03 0.03 34.50 40.88 34.00 28.52 26.61 0.11 0.21 0.40 0.79 0.93 1.30 1.32 1.38 1.44 1.49 1.13 1.14 1.15 1.16 1.17 1.40 1.43 1.47 1.51 1.53 1. Total Loss = Insertion Loss + 3dB splitter loss. G .045 1.14 wt grams 0.50 Amplitude Unbalance (dB) 4.0 3.8 LRPS-2-25J ISOLATION LRPS-2-25J TOTAL LOSS S-1(dB) 45 S-2(dB) ISOLATION (dB) B .31 7.87 TOTAL LOSS (dB) A .390 9.91 Total Loss (dB) 1 3.6 3.4 3.2 3.0 1700 1900 2100 2300 2500 40 35 30 25 20 15 1700 1900 FREQUENCY (MHz) 2100 2300 2500 FREQUENCY (MHz) LRPS-2-25J VSWR 1.6 1.5 #S-VSWR #1-VSWR electrical schematic #2-VSWR VSWR 1.4 1.3 1.2 1.1 1.0 1700 1900 2100 2300 2500 FREQUENCY (MHz) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] REV. C M151107 LRPS-2-25J ED-2361 DJ/TD/CP/AM 151018