Tol RDC IDC ( H) % MAX IN ( ) (A) CDRH6D38-3R3 3.3 @ 10kHz N 0.02 3.5 CDRH6D38-5R0 5.0 @ 10kHz N 0.024 2.9 CDRH6D38-6R2 6.2 @ 10kHz N 0.027 2.5 CDRH6D38-7R4 7.4 @ 10kHz N 0.031 2.3 CDRH6D38-8R7 8.7 @ 10kHz N 0.034 2.2 CDRH6D38-100 10 @ 10kHz N 0.038 2 CDRH6D38-120 12 @ 10kHz N 0.053 1.7 CDRH6D38-150 15 @ 10kHz N 0.057 1.6 CDRH6D38-180 18 @ 10kHz N 0.092 1.5 CDRH6D38-220 22 @ 10kHz N 0.096 1.3 CDRH6D38-270 27 @ 10kHz N 0.109 1.2 CDRH6D38-330 33 @ 10kHz N 0.124 1.1 CDRH6D38-390 39 @ 10kHz N 0.138 1 CDRH6D38-470 47 @ 10kHz N 0.155 0.95 CDRH6D38-560 56 @ 10kHz N 0.202 0.85 CDRH6D38-680 68 @ 10kHz N 0.234 0.75 CDRH6D38-820 82 @ 10kHz N 0.324 0.7 CDRH6D38-101 100 @ 10kHz N 0.358 0.65 SPECIFICATION TYPE = CONSTRUCTION = TERIMAL COATING = OPERATING TEMP. = STORAGE TEMP = INSULATION RESISTANCE = DIELECTRIC STREGTH = HUMIDITY EFFECTS = PACKAGING MARKING CDRH6D38 SURFACE MOUNT POWER INDUCTOR NICKEL / SILVER -40 TO +85 C -55 TO +125 C 100MOhm. 100V TERMINAL-CORE 250Vac TERMINAL-CORE L 5 @ 95%RH, 40 C, 1HR Q 5 @ 95%RH, 40 C, 1HR = 1000PCS/REEL = 3 CHARACTERS, VALUE NOTE TOLERANCES L=15%; M=20%; N=30% 6.70 6.70 2.65 2 2.65 7.3 L 4.0 Part NAME PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF AIT COMPONENTS LTD. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF AIT COMPONENTS LTD IS STRICTLY PROHIBITED. MATERIAL FINISH DATE AIT COMPONENTS LTD www.aitcomponents.com DRAWN CHECKED ENG APPR. -- UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS TOLERANCES: ONE PLACE DECIMAL +/-0.3 TWO PLACE DECIMAL +/-0.13 ANGLE +/-1 DEGREE -- DO NOT SCALE DRAWING TITLE: CDRH6D38 SMD POWER INDUCTOR SIZE A DWG. NO. SCALE:1:1 CDRH6D38 SMD POWER INDUCTOR SHEET 1 OF 1 REV. 00