GS18A 15~18W AC-DC Single Output Desktop series Features : Universal AC input / Full range No load power consumption<0.3W ErP step2 compliant Meet EISA 2007 (Energy Independence and Security Act) 3 pole AC inlet IEC320-C14 Class power (with earth pin) Protections: Short circuit / Overload / Over voltage Fully enclosed plastic case LED indicator for power on Approvals: UL / CUL / TUV / BSMI / CCC / PSE / CB / FCC / CE Pass LPS 2 years warranty (for 5V~28V only) SPECIFICATION GS18A05-P1J GS18A07-P1J GS18A09-P1J GS18A12-P1J GS18A15-P1J GS18A18-P1J GS18A24-P1J GS18A28-P1J GS18A48-P1J ORDER NO. SAFETY MODEL NO. DC VOLTAGE OUTPUT GS18A05 Note.2 5V GS18A07 GS18A09 GS18A12 GS18A15 GS18A18 GS18A24 GS18A28 GS18A48 7.5V 9V 12V 15V 18V 24V 28V 48V RATED CURRENT 3.0A 2.0A 2.0A 1.50A 1.20A 1.0A 0.75A 0.64A 0.375A CURRENT RANGE 0 ~ 3.0A 0 ~ 2.0A 0 ~2.0A 0 ~ 1.50A 0 ~ 1.20A 0 ~ 1.0A 0 ~ 0.75A 0 ~ 0.64A 0 ~ 0.375A RATED POWER (max.) 15W 15W 18W 18W 18W 18W 18W 18W 18W 80mVp-p 80mVp-p 80mVp-p 100mVp-p 150mVp-p 180mVp-p 240mVp-p 240mVp-p RIPPLE & NOISE (max.) Note.3 50mVp-p VOLTAGE TOLERANCE Note.4 5.0% 5.0% 5.0% 3.0% 3.0% 3.0% 2.0% 2.0% 2.0% LINE REGULATION Note.5 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LOAD REGULATION Note.6 5.0% 5.0% 5.0% 3.0% 3.0% 3.0% 2.0% 2.0% 2.0% SETUP, RISE, HOLD UP TIME 500ms, 20ms, 50ms/230VAC VOLTAGE RANGE 90 ~ 264VAC 135 ~ 370VDC FREQUENCY RANGE INPUT 79.5% AC CURRENT INRUSH CURRENT (max.) 0.5A / 100VAC OVERLOAD PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note. 7) EMC EMISSION EMC IMMUNITY OTHERS CONNECTOR NOTE 47 ~ 63Hz EFFICIENCY (Typ.) LEAKAGE CURRENT(max.) 82% 83% 85% 85% 85% 86% 86.5% 87% 45A / 230VAC 0.75mA / 240VAC 110 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 105 ~ 135% rated output voltage Protection type : Clamp by zener diode, output short 0 ~ +50 (Refer to "Derating Curve") 20% ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.03% / (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, CSA C22.2, TUV EN60950-1, BSMI CNS14336, PSE J60950-1(5~28V only), CCC GB4943 approved I/P-O/P:4242VDC , I/P-FG:2121VDC I/P-O/P, I/P-FG:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55022, EN61000-3-2,3, FCC PART 15 / CISPR22 class B, CNS13438 class B, GB9254 Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A PACKING PLUG 500Khrs min. MIL-HDBK-217F(25 93*54*36mm (L*W*H) 230g ; 60pcs / 15kg / CARTON See page2 CABLE See page2 MTBF DIMENSION 500ms, 20ms, 15ms/115VAC at full load ) 1.All parameters are specified at 230VAC input, rated load, 25 70% RH ambient. 2.DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 4.Tolerance: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 20% to 100% rated load 7.The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the EMC directives. File Name:GS18A-SPEC 2011-06-14 GS18A 15~18W AC-DC Single Output Desktop Mechanical Specification series Unit:mm UL1185 16AWG 1230 50mm for 5V~12V UL1185 18AWG 1830 50mm for 15V~48V 70 10mm POWER LED C"+" 11 0.5mm ID 2.1 x OD 5.5 NAME PLATE Plug Assignment 36 93 Standard plug: P1J 54 P1J OUTPUT CENTER + Static Characteristics Derating Curve 100 100 LOAD (%) LOAD (%) P/N 70 0 10 20 30 Ta ( 40 ) 50 80 60 0 50 60 70 80 90 100 260 INPUT VOLTAGE File Name:GS18A-SPEC 2011-06-14