Home Phone Networking Analog Magnetics Module with 10 Base-T ELECTRONICS INC. EPB5032G • Optimized for AMD79C978,Conexant CN7221 • & National DP83851 Chips • UL/IEC 950 Approved File #132261 • • Supports TUT Systems HPN Architecture • • Meets or exceeds IEEC 802.3 Requirements • • Robust construction allows for reflow processes • • Temperature Range -40°C to +85°C • Electrical Parameters @ 25° C Cut-off Frequency Insertion Loss (dB Max.) Return Loss (dB Min.) Attenuation (dB Min.) Lower Band MHz Upper Band MHz 6.0-9.0 MHz 6.0-9.0 MHz @1 MHz @ 27 MHz 4.0-5.8 9-11 -3 -12 -60 -55 • Filter Characteristic Impedance : 100 Ω • Isolation : 1500 Vrms • Schematic HPNA Chip Side 1+ Cable Side 1:1 Chip Side 14 (TIP) RX+ 4 10 Base-T 1:1 Cable Side 8 RX+ Sidactor .001 µF, 2000 V BPF 2- 9 RX- RX- 5 13 (RING) TX+ 6 1: 2 11 TX+ Gnd 3 TX- 7 10 TX- Package A Pin 1 I.D. Dimensions N J PCA EPB5032G Date Code B Pad Layout Q D P M E C K L H I F G PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Dim. Min. (Inches) Max. Nom. A B C D E F G H I J K L M N P Q .990 .470 .250 --.010 --.590 .016 .008 --0° .025 --------- 1.010 1.00 .490 .480 .270 .260 --.600 .015 .0125 --.100 .610 .600 .022 .018 .012 .010 --.200 8° 4° .045 .035 --.030 --.100 --.090 --.670 CSB5032G Rev. 3 3/9/00 Product performance is limited to specified parameters. Data is subject to change without prior notice. (Millimeters) Min. Max. Nom. 25.15 11.94 6.35 --.254 --14.99 .406 .203 --0° .635 --------- 25.65 12.45 6.86 --.381 --15.49 .559 .305 --8° 1.14 --------- 25.40 12.19 6.60 15.24 .318 2.54 15.24 .457 .254 5.08 4° .889 .762 2.54 2.29 17.02 TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com