Light Touch Switches/EVQPE1/PN/5P 6.0 mm҂3.5 mm SMD Light Touch Switches Type: EVQPE1/EVQPN/EVQ5P ■ Features ■ Recommended Applications ● External dimensions : 6.0 mm҂3.5 mm, Height 4.3 mm, 5.0 mm ● Operating switches for other electronic equipment ■ Explanation of Part Numbers 1 2 3 E V Q Product Code 4 P 5 6 7 8 9 5 Type Operating Force Height Push Plate Color ■ Product Chart Type SMD Operating Force 1.0 N±0.5 N EVQPE1 1.6 N±0.5 N EVQPNF 2.4 N±0.6 N EVQ5PN Height H=4.3 mm H=5.0 mm ■ Specifications Type Snap action/Push-on type SPST Circuit Diagram Electrical Rating Contact Resistance Insulation Resistance Dielectric Withstanding Voltage Bouncing Mechanical Operating Force Travel Endurance Operating Life Operating Temperature Storage Temperature Minimum Quantity/Packing Unit Quantity/Carton A B 10 µA 2 Vdc to 50 mA 12 Vdc (Resistive load) 100 m액 max. 100 M액 min. (at 100 Vdc) 250 Vac for 1 minute 10 ms max. (ON, OFF) 1.0 N±0.5N (Low force type) 1.6 N±0.5 N (Standard) 0.25 mm 2.4 N±0.6 N +0.20 –0.10 50000 cycles min. mm 30000 cycles min. –30 °C to +85 °C –40 °C to +85 °C (Bulk) –20 °C to +40 °C (Taping) 2000 pcs. Embossed Taping(Reel Pack) (H = 5.0 mm) 10000 pcs. (H = 5.0 mm) 2500 pcs. Embossed Taping(Reel Pack) (H = 4.3 mm) 12500 pcs. (H = 4.3 mm) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. May. 2008 Light Touch Switches/EVQPE1/PN/5P ■ Dimensions in mm (not to scale) EVQPE1 EVQPNF EVQ5PN H 3.5 0.5 max. 3.5±0.5 1.4 1.0±0.2 (2.6) 3.0 3.0 6.0 7.2 max. A (Embossed Taping) B A 1.3 7.4 1.6 3.4 B Circuit diagram Part Numbers PWB land pattern for reference Operating Force H=Height Push Plate Color Operating Life EVQPE104K 1.0 N 4.3 mm Black 50000 cycles EVQPE105K 1.0 N 5.0 mm Black 50000 cycles EVQPNF04M 1.6 N 4.3 mm Natural 50000 cycles EVQPNF05M 1.6 N 5.0 mm Natural 50000 cycles EVQ5PN04K 2.4 N 4.3 mm Black 30000 cycles EVQ5PN05K 2.4 N 5.0 mm Black 30000 cycles ■ Recommended Reflow Soldering Conditions ● Embossed Carrier Taping Fan or Normal Temp. Tape width=12.0 mm t1 230 180 Feeding hole Chip pocket P2 P0 E φD0 150 F W A B Operation Top (°C) MAX. 260 t2 (Normal Temp.) 90±30 P1 Chip component Tape running direction 40±10 Soldering Time (s) Unit: mm Part No. Height EVQPE1 EVQPN EVQ5P 4.3/5.0 A B W 4.45±0.20 7.25±0.20 12.0±0.3 F E P1 P2 P0 D0 Dia. 5.5±0.1 1.75±0.10 8.0±0.1 2.0±0.1 4.0±0.1 1.5 –0 Item A t1 +0.1 t2 0.30±0.05 4.5/5.2±0.2 ● Standard Reel Dimensions in mm (not to scale) T E C B C B Rate (mm) φ370.0±2.0 φ50.0 min. φ13.0±0.5 D r A Item W Rate (mm) 14.0±1.5 W D E φ21.0±1.0 2.0±0.5 T t r — 1.0 to 3.0 1.0±0.5 t Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Jun. 2008