Hittite HMC577LC4B Smt gaas mmic x2 active frequency multiplier, 27 - 31 ghz output Datasheet

HMC577LC4B
SMT GaAs MMIC x2 ACTIVE FREQUENCY
MULTIPLIER, 27 - 31 GHz OUTPUT
Typical Applications
Features
7
The HMC577LC4B is suitable for:
Very High Output Power: +20 dBm
• Clock Generation Applications:
SONET OC-192 & SDH STM-64
Low Input Power Drive: -2 to +6 dBm
FREQ. MULTIPLIERS - ACTIVE - SMT
v01.1208
• Point-to-Point & VSAT Radios
Very High Fo, 3Fo Isolation:
>55 dBc @ Fout= 29 GHz
• Test Instrumentation
100 KHz SSB Phase Noise: -128 dBc/Hz
• Military & Space
Single Supply: +5V@ 213 mA
RoHS Compliant 4x4 mm SMT Package
Functional Diagram
General Description
The HMC577LC4B is a x2 active broadband frequency multiplier utilizing GaAs PHEMT technology in a
leadless RoHS compliant SMT package. When driven
by a +5 dBm signal, the multiplier provides +20 dBm
typical output power from 27 to 31 GHz. The Fo and
3Fo isolations are >55 dBc at 29 GHz. The
HMC577LC4B is ideal for use in LO multiplier chains
for Pt to Pt & VSAT Radios yielding reduced parts
count vs. traditional approaches. The low additive
SSB Phase Noise of -128 dBc/Hz at 100 kHz offset
helps maintain good system noise performance. The
RoHS packaged HMC577LC4B eliminates the need
for wire bonding, and allows the use of surface mount
manufacturing techniques.
Electrical Specifi cations, TA = +25° C, Vdd = +5V, 5 dBm Drive Level
Parameter
Min.
Frequency Range, Input
Frequency Range, Output
Max.
Units
GHz
27 - 31
GHz
20
dBm
Fo Isolation (with respect to output level)
60
dBc
3Fo Isolation (with respect to output level)
55
dBc
Input Return Loss
20
dB
Output Return Loss
7
dB
SSB Phase Noise (100 kHz Offset)
-128
dBc/Hz
Supply Current (Idd)
213
mA
Output Power
7 - 106
Typ.
13.5 - 15.5
15
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC577LC4B
v01.1208
SMT GaAs MMIC x2 ACTIVE FREQUENCY
MULTIPLIER, 27 - 31 GHz OUTPUT
Output Power vs. Drive Level
26
25
24
20
20
18
16
14
+25C
+85C
-40C
12
10
15
10
5
0
-10
6
-15
26
27
28
29
30
31
32
-4 dBm
-5
8
25
-6 dBm
25
33
-2 dBm
26
27
28
29
30
31
32
33
32
33
Isolation @ 5 dBm Drive Level
26
30
24
20
OUTPUT POWER (dBm)
22
20
18
16
14
Vdd=4.5V
Vdd=5.0V
Vdd=5.5V
10
0
Fo
2Fo
3Fo
-10
-20
-30
-40
-50
8
6
-60
25
26
27
28
29
30
31
32
25
33
26
27
OUTPUT FREQUENCY (GHz)
28
29
30
31
FREQUENCY (GHz)
Output Power vs. Input Power
25
20
OUTPUT POWER (dBm)
OUTPUT POWER (dBm)
2 dBm
OUTPUT FREQUENCY (GHz)
Output Power vs.
Supply Voltage @ 5 dBm Drive Level
10
0 dBm
4 dBm
OUTPUT FREQUENCY (GHz)
12
7
6 dBm
FREQ. MULTIPLIERS - ACTIVE - SMT
22
OUTPUT POWER (dBm)
OUTPUT POWER (dBm)
Output Power vs.
Temperature @ 5 dBm Drive Level
15
10
5
13.5GHz
15GHz
16.5GHz
0
-5
-10
-15
-10
-8
-6
-4
-2
0
2
4
6
8
10
INPUT POWER (dBm)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
7 - 107
HMC577LC4B
v01.1208
SMT GaAs MMIC x2 ACTIVE FREQUENCY
MULTIPLIER, 27 - 31 GHz OUTPUT
Output Return Loss vs. Temperature
Input Return Loss vs. Temperature
7 - 108
0
0
INPUT RETURN LOSS (dB)
-2
OUTPUT POWER (dBm)
FREQ. MULTIPLIERS - ACTIVE - SMT
7
-5
+25C
+85C
-40C
-10
-15
-20
-4
-6
-8
-10
-12
+25C
+85C
-40C
-14
-16
-18
-25
12.5
-20
13
13.5
14
14.5
15
FREQUENCY (GHz)
15.5
16
16.5
25
26
27
28
29
30
31
FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
32
33
HMC577LC4B
Absolute Maximum Ratings
RF Input (Vdd = +5V)
+13 dBm
Supply Voltage (Vdd)
+6.0 V
Channel Temperature
175 °C
Continuous Pdiss (T= 85 °C)
(derate 13.8 mW/°C above 85 °C)
1.24 W
Thermal Resistance
(channel to ground paddle)
73 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
SMT GaAs MMIC x2 ACTIVE FREQUENCY
MULTIPLIER, 27 - 31 GHz OUTPUT
Typical Supply Current vs. Vdd
Vdd (Vdc)
Idd (mA)
4.5
212
5.0
213
5.5
214
Note:
Multiplier will operate over full voltage range shown above.
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
7
FREQ. MULTIPLIERS - ACTIVE - SMT
v01.1208
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA
2. LEAD AND GROUND PADDLE PLATING: 30-80 MICROINCHES GOLD OVER
50 MICROINCHES MINIMUM NICKEL.
3. DIMENSIONS ARE IN INCHES [MILLIMETERS].
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO PCB RF GROUND.
7. CLASSIFIED AS MOISTURE SENSITIVITY LEVEL (MSL) 1.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
7 - 109
HMC577LC4B
v01.1208
SMT GaAs MMIC x2 ACTIVE FREQUENCY
MULTIPLIER, 27 - 31 GHz OUTPUT
Pin Description
FREQ. MULTIPLIERS - ACTIVE - SMT
7
7 - 110
Pin Number
Function
Description
1, 2, 6-13,
17-21, 23, 24
N/C
These pins are internally not connected; however,
this product was specified with these pins connected
to RF/ DC ground.
3, 5, 14, 15
GND
Package bottom must also be connected
to RF/DC ground.
4
RFIN
Pin is AC coupled and matched to 50 Ohms.
15
RFOUT
Pin is AC coupled and matched to 50 Ohms.
22
Vdd
Supply voltage 5V ± 0.5V. External bypass capacitors
of 100 pF, 1,000 pF and 2.2 μF are required.
Interface Schematic
Application Circuit
Component
Value
C1
100 pF
C2
1,000 pF
C3
2.2 μF
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC577LC4B
v01.1208
SMT GaAs MMIC x2 ACTIVE FREQUENCY
MULTIPLIER, 27 - 31 GHz OUTPUT
Evaluation PCB
FREQ. MULTIPLIERS - ACTIVE - SMT
7
List of Materials for Evaluation PCB 115223 [1]
Item
Description
J1, J2
PCB Mount SRI K Connector
J3
Molex Header, 2mm
C1
100 pF Capacitor, 0402 Pkg.
C2
1,000 pF Capacitor, 0603 Pkg.
C3
2.2 μF Tantalum Capacitor
U1
HMC577LC4B x2 Active Multiplier
PCB [2]
110335 Eval Board
[1] Reference this number when ordering complete evaluation PCB
The circuit board used in the final application should
be generated with proper RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed
paddle should be connected directly to the ground
plane similar to that shown. A sufficient number of
via holes should be used to connect the top and
bottom ground planes. The evaluation circuit board
shown is available from Hittite upon request.
[2] Circuit Board Material: Rogers 4350
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
7 - 111
Similar pages