Artesyn AVD75-48S1V2B-6L Fixed switching frequency Datasheet

POWER
AVD75 Series
75 Watts
Data Sheet
Total Power: 75 Watts
Input Voltage:36 - 75 V
# of Outputs: Single
SPECIAL FEATURES
ƒƒ 2:1 Wide input range
ƒƒ Optimised for high density, small space
applications
ƒƒ Low ripple and noise
ƒƒ Fixed switching frequency
ƒƒ High efficiency
ƒƒ High capacitive load capability
ƒƒ Pre-bias start-up capability
ƒƒ Basic insulation system
ƒƒ Through hole or SMT termination
ƒƒ Openframe structure with baseplate
option
ƒƒ Two year warranty
SAFETY
ƒƒ UL, cUL: UL60950
ƒƒ TUV/CE: IEC/EN60950
Electrical Specifications
Input
Input ra­nge
36 - 75 Vdc
Efficiency
92% @ 3.3 V; 84% @ 1.2 V
Output
Voltage tolerance
+/-1.5%
Line regulation
0.2%
Load regulation
Single output: 0.5% @ 3.3 V; 0.25% @ 1.2 V
Noise/ripple
3.3 Vo: 70 mV
1.2Vo: 45 mV
Over voltage protection
Over temperature protection
Auto-restart
Switching frequency
1.2V: 270 KHz, 3.3V: 250 KHz
Temperature coefficien
±0.02 /°C
Isolation
I/O isolation:
1500 Vdc min.
Environmental Specifications
Operating ambient temperature range
-40 °C to +85 °C
Storage temperature
-55 °C to +125 °C
Humidity
5% to 95% (non-condensing)
MTBF
2 Million hours
RoHS Compliant
AVD75 Series Data Sheet
Ordering Information
Model number
Input voltage
Output voltage
Power
AVD75-48S3V3-6L
36 - 75 Vin
3.3 V @ 20 A
66 W
AVD75-48S3V3P-6L
36 - 75 Vin
3.3 V @ 20 A
66 W
AVD75-48S3V3B-6L
36 - 75 Vin
3.3 V @ 20 A
66 W
AVD75-48S3V3PB-6L
36 - 75 Vin
3.3 V @ 20 A
66 W
AVD75-48S1V2TL
36 - 75 Vin
1.2 V @ 25 A
30 W
AVD75-48S1V2-6L
36 - 75 Vin
1.2 V @ 25 A
30 W
AVD75-48S1V2B-6L
36 - 75 Vin
1.2 V @ 25 A
30 W
Notes:
Standard version is negative enable
-6 = 3.8 mm pin length
-T = Surface mount, reel tape package
-S = Surface mount, tray package
-L = RoHS 6 compliance
-P = Positive enable
Mechanical Drawings
22.90[0.902]
15.24 [0.600]
33[1.299]
4
3
5
2
6
7
1
8
Notes:
15.24[0.600]
7.62[0.300]
BOTTOM VIEW
28.00[1.102]
2-Ø2.3±0.1
2-Ø1.5±0.1
LOAD BOARD
0.3[0.12]MIN
6-Ø1.8±0.1
L
10.5[0.413]
SIDE VIEW
6-Ø1.0±0.1
UNIT: mm[inch]
BOTTOM VIEW: pin on upside
TOLERANCE: X.Xmm±0.5mm[X.XX in.±0.02in.]
X.XXmm±0.25mm[X.XXX in.±0.01in.]
1.
All specifications are subject to change without notice.
Mechanical drawings are for reference only.
2.
Label and logo appearance may vary from what is shown on
mechanical drawings.
AVD75 Series Data Sheet
Pin Assignments
Pin #
Function
1
+V in
2
Enable
3
-V in
4
-V out
5
- Sense
6
Trim
7
+Sense
8
+V out
WORLDWIDE OFFICES
Americas
Europe (UK)
Asia (HK)
2900 S.Diablo Way
Tempe, AZ 85282
USA
+1 888 412 7832
Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX
United Kingdom
+44 (0) 1384 842 211
14/F, Lu Plaza
2 Wing Yip Street
Kwun Tong, Kowloon
Hong Kong
+852 2176 3333
Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and
service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names,
trademarks, or registered trademarks of their respective owners. © 2016 Artesyn Embedded Technologies, Inc.
All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal.
www.artesyn.com
For more information: www.artesyn.com/power
For support: [email protected]
AVD75 Series-DS 14Oct2016
Similar pages